journal article·2002-09

Acoustic emission studies on the lubrication of a fibrous collagen material-leather

Cheng-Kung Liu, N. P. Latona

Journal of Materials Science· Volume 37· Issue 18
Publisher page

Abstract

For thousands of years, collagen materials, such as leather, have been among the most dominant natural fibrous materials used by humans. Fatliquoring is one of the critical steps in the leather-making process, wherein oil or a lubricant is added to the leather to prevent the leather fibers from sticking together, thereby providing sufficient pliability to the leather. We have examined the feasibility of using the acoustic emission (AE) technique to characterize the degree of lubrication of leather produced with various fatliquor concentrations. In a tensile test, an acoustic transducer was contacted with the leather samples to collect their AE quantities and properties. The samples lubricated with a fatliquor concentration less than 10% showed twin peaks on the plot of hits rate versus time. This implied that a non-uniform fracture occurred in a leather structure that was not sufficiently lubricated. In contrast, a sufficiently lubricated leather structure showed a steady increase in hits rate with time until it fractured. Traditional stress-strain tests did not reflect these behaviors. Observations also showed a direct correlation between the cumulative hits and fatliquor concentration. The results of this work may provide a route to identify an adequate degree of lubrication in the leather.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Collagen: Extraction and Characterization · Ultrasonics and Acoustic Wave Propagation · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. C.-K. Liu, N. P. Latona and G. L. Dimaio, J.Amer. Leather Chemists Assoc. 97 (2002) 284.
2. Idem., ibid. 96 (2001) 367.
3. P. L. Kronick and P. Thayer, ibid. 84 (1989) 257.
4. C.-K. Liu and M. D. Mc Clintick, ibid. 94 (1999) 8.
5. C.-K. Liu and G. L. Dimaio, ibid. 95 (2000) 170.
6. Idem., ibid. 96 (2001) 243. 3832
7. H. G. David, A. E. Stearn and E. F. Denby, Proceedings of Third Japan-Australia Symposium on Objective Measurement (Textile Machinery Society of Japan, Osaka, Japan, 1986) p. 527.
8. M. Fujimoto, Sen-I Kikai Gakkaishi 39 (1986) 3771.10.4188/transjtmsj.39.10_P371 ↗
9. E. Yi and G. Cho, J.Text.Inst. Part 1 (4) (2000) 530.10.1080/00405000008659126 ↗
10. A. A. Pollock, “Metals Hand Book, ” 9th ed. Vol. 17 (ASM International, 1989) p. 278.
11. R. K. Miller and P. Mc Intire (eds.), “Nondestructive Testing Handbook, ” Vol. 5: Acoustic Emission Testing, 2nd ed. (American Society for Nondestructive Testing, 1987) p. 29.
12. C.-K. Liu and M. D. Mc Clintic, J.Amer.Leather Chemists Assoc. 92 (1997) 103.
13. G. Reich, J.Soc.Leather Technologists and Chemist 83 (1999) 63.