The influence of Si and Mg rich phases on the mechanical properties of 6061 Al-matrix composites reinforced with Al2O3
Source abstract
Abstract
Besides altering the kinetics of precipitation, the reinforcements with alumina particles appear to alter the relative proportions of the various phases formed in the matrix alloy during ageing. Alumina also seems to reduce the volume fractions of hardening phase in these materials, especially at higher contents. One reason for this effect could be the dislocation relief of the matrix strain associated with the early precipitates. Additionally, the diffusion of Mg and its subsequent incorporation into the reinforcement at the Al2O3/Al interface could also result in Mg depletion from the matrix, accounting for the reduction of the β (Mg2Si) particle sizes. Magnesium incorporation into interfacial alumina to form MgAl2O4 has been observed in these materials. This paper shows that the nature and morphology of the second phases depend the heat treatment conditions on.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A. M. SAMUEL and F. H. SAMUEL, Key Eng. Mater. 104– 107 (1995) 65.10.4028/www.scientific.net/KEM.104-107.65 ↗
2. N. R. M. R. BHARGAVA, I. SAMAJDAR, S. RANGANATHAN and M. K. SURAPPA, Metall. Mater. Trans. A 29A (1998) 2835.10.1007/s11661-998-0324-6 ↗
3. I. DUTTA, S. M. ALLEN and J. L. HAFLEY, ibid. 22A (1995) 1553.
4. G. BIROLI, G. CAGLIOTI, L. MARTINI and G. RIONTINO, Scripta Metall. Mater. 39(2) (1998) 197.10.1016/S1359-6462(98)00140-7 ↗
5. P. APPENDINO and C. BADINI, Mater. Sci. Eng. A135 (1991) 275.10.1016/0921-5093(91)90575-8 ↗
6. T. DAS, S. BANDYOPADHYAY and S. J. BLAIRS, J. Mater. Sci. 29 (1994) 5680.10.1007/BF00349964 ↗
7. Idem., in Proc. Conf. ICCM/9 Metal Matrix Composites Madrid (1995) Vol. I, p. 424.
8. P. MERLE, D. DAFIR and S. M. SEYED REYHANI, in Proc. Conf. ICCM/9 Metal Matrix Composites Madrid (1995)Vol. I, p. 401.
9. S. IKENO, M. ARAKI, K. MATSUDA, F. SHINAGAWA and Y. UETANI, J. Japan Inst. Light Met. 49(6) (1999) 244.10.2464/jilm.49.244 ↗
10. D. YU and T. CHANDRA, Mater. Trans., JIM 34(12) (1993) 1184.10.2320/matertrans1989.34.1184 ↗
11. J. WANG, M. FURUKAWA, Z. HORITA, M. NEMOTO, Y. MA and T. G. LANGDON, Metall. Mater. Trans. A 26A (1995) 581.10.1007/BF02663907 ↗
12. D. J. LOYD, I. JIN and G. C. WEATHERLY, Scripta Metall. Mater. 31(4) (1994) 393.10.1016/0956-716X(94)90006-X ↗
13. A. D. MCLEOD and C. M. GABRYEL, Metall. Mater. Trans. A 23A (1992) 1279.10.1007/BF02665059 ↗
14. J. C. LEE, G. H. KIM and H. I. LEE, Mater. Sci. Technol. 13 (1997) 182.10.1179/mst.1997.13.3.182 ↗
15. J. K. PARK and A. J. ARDELL, Acta Metall. 34(12) (1986) 2399.10.1016/0001-6160(86)90143-4 ↗
16. P. A. THACKERY, J. Inst. Metals 96 (1968) 228.
17. S. K. TANG and T. SRITHARAN, Mater. Sci. Technol. 14 (1998) 738.10.1179/mst.1998.14.8.738 ↗
18. A. K. GUPTA, P. H. MAROIS and D. J. LLOYD, Mater. Char. 37 (1996) 61.10.1016/S1044-5803(96)00046-0 ↗
19. M. GAO, C. R. FENG and R. P. WEI, Metall. Mater. Trans. A 29A (1998) 1145.10.1007/s11661-998-0240-9 ↗
20. A. K. GUPTA and D. J. LLOYD, ibid. 30A (1999) 879.10.1007/s11661-999-1021-9 ↗
21. S. IKENO, K. MATSUDA and S. RENGAKUJI, J. Mater. Sci. 36 (2001) 1921.10.1023/A:1017589723605 ↗
22. M. TAN, Q. XIN, Z. LI and Y. ZONG, ibid. 36 (2001) 2045.10.1023/A:1017591117670 ↗
23. D. SUN, X. C. SUN, D. O. NORTHWOOD and J. H. SOKOLOWSKY, Mater. Char. 36 (1996) 83.10.1016/1044-5803(96)00002-2 ↗