journal article·2001-12

Synthesis of Si3N4 using sepiolite and various sources of carbon

A. O. Kurt, T. J. Davies

Journal of Materials Science· Volume 36· Issue 24
Publisher page

Abstract

Sepiolite of Turkish origin was used as Si precursor in the syntheses of silicon nitride (Si3N4) powders by carbothermal reduction-nitridation (CRN) by mixing with several reducing agents i.e. charcoal, carbon black and petroleum coke as discrete particles and acrylonitrile as an intercalation medium. Purified sepiolite samples with a pre-determined C/SiO2 ratio of 4 yielded Si3N4 powders after firing at temperatures 1300–1475°C under continuous nitrogen flow. The various sepiolite-reducing agent combinations were evaluated. The α/β ratio and secondary phase content of the powders after CRN were found to depend on temperature, time, heating rate and on the physicochemical properties of the precursor used such as, surface area and mixing of the reactants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. T. Yamada, Am. Ceram. Soc. Bull. 72(5) (1993) 99.
2. R. Reidel and W. Dressler, Ceramics International 22 (1996) 233.10.1016/0272-8842(95)00097-6 ↗
3. W. R. Cannon et al., J. Amer. Ceram. Soc. 65(7) (1982) 324.10.1111/j.1151-2916.1982.tb10464.x ↗
4. J. K. Schoenung, Ceramic Bulletin 70(1) (1991) 112.
5. Z. G. KostiĆ et al., Ceramics International 22 (1996) 179.10.1016/0272-8842(95)00072-0 ↗
6. A. Atkinson, J. Amer. Ceram. Soc. 59(7/8) (1976) 285.10.1111/j.1151-2916.1976.tb10966.x ↗
7. W. D. Glaeser, in “Ceramics for High Performance Applications-II,” edited by E. M. Lenoe, R. N. Katz, and J. J. Burke (Brook Hill Publishing, Chestnut Hill, MA, 1978) p. 549.
8. M. Mori et al., in “Progress in Nitrogen Ceramics,” edited by F. L. Riley (Martinus Nijhoff Publishers, The Netherlands, 1983) p. 149.10.1007/978-94-009-6851-6_12 ↗
9. S. C. Zhang and W. R. Cannon, J. Amer. Ceram. Soc. 67(10) (1984) 691.10.1111/j.1151-2916.1984.tb19684.x ↗
10. W. R. Cannon and S.–C. Zhang, in “Ceramic Materials and Components for Engines,” Proceedings of the 2nd International Symposium, edited by W. Bunk and H. Hauser, 14–17 April 1986, Lubeck-Travemunde, France, p. 86.
11. M. Ekelund et al., J. Mater. Sci. 31 (1996) 5749.10.1007/BF01160824 ↗
12. K. Koc and S. Kaza, J. European Ceram. Soc. 18 (1998) 1471.10.1016/S0955-2219(98)00005-3 ↗
13. S. Natansohn, “Ceramic Materials and Components for Engines,” Proceedings of the 2nd International Symposium, edited by W. Bunk and H. Hauser, 14–17 April 1986, Lubeck-Travemunde, France, p. 27.
14. G. A. Cochran, Key Engineering Materials 89–91 (1994) 3.
15. C. Bishop et al., ibid. 89–91 (1994) 9.
16. M. Ekelund and B. Forslund, J. Amer. Ceram. Soc. 75(3) (1992) 532.10.1111/j.1151-2916.1992.tb07838.x ↗
17. M. V. Vlasova et al., J. Mater. Sci. 30 (1995) 5263.10.1007/BF00356080 ↗
18. Y. W. Cho and J. A. Charles, Mater. Sci. and Tech. 7 (1991) 399.10.1179/mst.1991.7.5.399 ↗
19. F. K. Van Dijen et al., Key Engineering Materials 89–91 (1994) 203.
20. K. Brauner and A. Preisinger, Miner. Petrogr. Mitt. 6 (1956) 120.
21. Y. Sugahara et al., J. Mater. Sci. Lett. 4 (1985) 928.10.1007/BF00720542 ↗
22. H. Arik et al., in Proceedings of of the 7th National Clay Symposium, 27–30 September 1995, Ankara, Turkey.
23. H. Arik, Ph.D. Thesis, Gazi University, Ankara, Turkey 1996.
24. J. Cornejo and M. C. Hermosin, Clay Minerals 23 (1988) 391.10.1180/claymin.1988.023.4.06 ↗
25. A. O. Kurt and T. J. Davies, J. Mater. Sci. 36(4) (2001) 957.10.1023/A:1004823823130 ↗