journal article·2002-07

Martensitic transformation of an aged/thermal-cycled Ti30.5Ni49.5Zr10Hf10 shape memory alloy

S. F. Hsieh, W. K. Chang

Journal of Materials Science· Volume 37· Issue 14
Publisher page

Abstract

Ti30.5Ni49.5Zr10Hf10 alloy undergoes a B2 ↔ B19′ one stage martensitic transformation. Martensitic transformation temperatures decrease, but the hardness increases with increasing aging time, resulting from the effect of point defects/atoms rearrangement in B2 phase induced by aging at 450°C. Thermal cycling can also decrease the transformation temperatures while increasing the hardness of the alloy. The strengthening effects of aging and thermal cycling on the Ms (M*) temperature of this alloy follows the expression Ms = T0 − KKΔσ y, in which K values are affected by different strengthening processes. Experimental results indicate that martensitic transformation temperatures of Ti30.5Ni49.5Zr10Hf10 alloy can be more effectively depressed by aging than by thermal cycling. The K value of this aged alloy is smaller than that of aged Ti40.5Ni49.5Zr10 alloy due to the former having the higher aged temperature and the less lattice distortion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dark Matter and Cosmic Phenomena · Age of Information Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Y. C. LO, S. K. WU and C. M. WAYMAN, Scripta Metall. 24 (1990) 1571.10.1016/0956-716X(90)90434-I ↗
2. P. G. LINDQIST and C. M. WAYMAN, in “Engineering Aspects of Shape Memory Alloys,” edited by T. W. Duering, K. N. Melton, D. Stockel and C. M. Wayman (Butterworth Heinemann, London, 1990) p. 58.10.1016/B978-0-7506-1009-4.50009-3 ↗
3. S. K. WU and C. M. WAYMAN, Metallography 20 (1987) 359.10.1016/0026-0800(87)90045-0 ↗
4. J. H. MULDER, J. H. MASS and J. BEYER, in ICOMAT (1992) p. 869.
5. S. F. HSIEH and S. K. WU, J. Alloys and Compounds 270 (1998) 237.10.1016/S0925-8388(98)00368-5 ↗
6. H. M. RIETVELD, J. Appl. Crystallogr. 2 (1969) 65.10.1107/S0021889869006558 ↗
7. S. F. HSIEH and S. K. WU, J. Alloys and Compounds 266 (1998) 276.10.1016/S0925-8388(97)00448-9 ↗
8. H. C. LIN, S. K. WU and J. C. LIN, Materials Chemistry and Physics 37 (1994) 184.10.1016/0254-0584(94)90091-4 ↗
9. S. F. HSIEH and S. K. WU, J. Materials Characterization 41 (1998) 151.10.1016/S1044-5803(98)00032-1 ↗
10. H. C. LIN and S. K. WU, Scripta Metall. 26 (1992) 59.10.1016/0956-716X(92)90369-P ↗
11. C. M. HWANG, M. MEICHLE, M. B. SALAMON and C. M. WAYMAN, Phil. Mag. A 47 (1983) 9.10.1080/01418618308243106 ↗
12. S. K. WU and S. F. HSIEH, J. Alloys and Compounds 297 (2000) 294.10.1016/S0925-8388(99)00604-0 ↗
13. X. D. HAN, W. H. ZOU, R. WANG, Z. ZHANG and D. Z. YANG, Acta Mater. 44 (1996) 3711.10.1016/1359-6454(96)00034-1 ↗
14. V. PELOSIN, F. DEBORDE and A. RIVIERE, J. of De Physique, IV 6 (1996) 93.
15. H. C. LIN, PhD. thesis, Institute of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan, 1997.
16. J. S. ZHU, R. SCHALLER and W. BENOIT, Phys. Lett. A 141 (1989) 177.10.1016/0375-9601(89)90784-6 ↗
17. S. F. HSIEH and S. K. WU, J. Alloys and Compounds 335 (2002) 254.10.1016/S0925-8388(01)01821-7 ↗
18. M. NISHIDA, K. YAMAUCHI, I. ITAI, H. OHGI and A. CHIBA, Acta. Metall. 43 (1995) 1229.10.1016/0956-7151(94)00328-F ↗
19. M. NISHIDA, H. HGI, I. ITAI, A. CHIBA and K. YAMAUCHI, ibid. 43 (1995) 1219.10.1016/0956-7151(94)00332-C ↗
20. K. M. KNOWLES, Phil. Mag. A 45 (1982) 357.10.1080/01418618208236176 ↗
21. R. SANTAMARTA, C. SEGUI, J. PONS and E. CESARI, Scripta Materia. 41 (1999) 867.10.1016/S1359-6462(99)00221-3 ↗
22. S. MIYAZAKI, T. IMAI, Y. IGO and K. OTSUKA, Metall. Trans. 17A (1986) 76.
23. M. COHEN, E. S. MACHLIN and V. G. PARANJPE, in “Thermodynamics in Physical Metallurgy” (ASM, Metals Park, Ohio, 1950).
24. E. HORNBOGEN, Acta Metall. 33 (1991) 595.10.1016/0001-6160(85)90024-0 ↗