journal article·2003-09

Influence of the starting condition on the kinetics of sensitization and loss of toughness in an AISI 304 steel

S. S. M. Tavares, M. P. Cindra Fonseca, Alex Maia, Pedro de Lima-Neto

Journal of Materials Science· Volume 38· Issue 17
Publisher page

Abstract

This work describes the investigation of the embrittlement of AISI 304 steel sensitized at 650°C by Charpy impact test, comparing two starting conditions: (1) mill annealed and machined (MA-M); and (2) solution treated at 1050°C by 1 h followed by oil quenching (ST). The degree of sensitization for both samples was assessed by Optical Microscopy (OM), Scanning Electron Microscopy (SEM) and by Double Loop Electrochemical Potentiodynamic Reactivation test. The results showed that MA-M samples undergo more severe and rapid embrittlement than ST ones and a higher kinetics of sensitization due to small strains concentrated in grain boundaries and α′ martensite phase produced during the machining operations. The martensite phase is found to be quite stable at the sensitization treatment at 650°C. The increase of microvoids nucleation at the grain boundaries seems to be the mechanism of embrittlement in the sensitized 304 steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. A. John Sedriks, “Corrosion of Stainless Steels,” 2nd ed. (J. Wiley & Sons, 1996).
2. Annual Book of ASTM Standarts, Designation A-262-93-practice A, 1994 p. 44.
3. N. Lopez, M. Cid, M. Puiggali, I. Azkarate and A. Pelayo, Mater. Sci. Eng. A 229 (1997) 123.10.1016/S0921-5093(97)00008-7 ↗
4. W. L. clarke, R. L. Cowan and W. L. Walker, Comparative Methods for Measuring Degree of Sensitization in Stainless Steel, Intergranular Corrosion of Stainless Steel, ASTM STP 659, edited by R. F. Steigerwald (ASTM, Philadelphia, Pensylvania, 1978) p. 99.
5. M. Akashi, T. Kawarnoto, F. Umemura and B. Gijutsu, Corros. Eng. 29 (1980) 163.10.3323/jcorr1974.29.3_142 ↗
6. M. J. G. Silva, A. A. Souza, A. V. C. Sobral, P. de Lima-Neto and H. F. G. Abreu, J. Mater. Sci., accepted for publication.
7. O. A. Hilders and M. G. Santana, Metallography 21 (1998) 151.10.1016/0026-0800(88)90013-4 ↗
8. E. Almanza and L. E. Murr, J. Mater. Sci. 35 (2000) 3181.10.1023/A:1004886213848 ↗
9. L. E. Murr, A. Advani, S. Shankar and D. G. Atteridge, Mater. Character. 39 (1997) 575.10.1016/S1044-5803(97)00145-9 ↗
10. J. G. Maldonado, A. H. Advani, L. E. Murr and W. W. Fischer, in “Microstructural Science,” Vol. 21, edited by C. R. Brooks and M. R. Louthan (ASM International, Materials Park, OH, 1994).
11. E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. E. Murr, W. W. Fisher and A. H. Advani, Mater. Character. 35 (1995) 99.10.1016/1044-5803(95)00072-0 ↗
12. R. Beltran, J. G. Maldonado, L. E. Murr and W. W. Fisher, Acta Mater. 45(10) (1997) 4351.10.1016/S1359-6454(97)00106-7 ↗
13. Annual Book of ASTM standarts, Designation E-23-94b, 1995, p. 137.
14. A. P. Majidi and M. A. Streicher, Corrosion 40 (1984) 584.10.5006/1.3581921 ↗