journal article·2008-06

Investigation of the thermomechanical properties of industrial refractories: the French programme PROMETHEREF

Michel Boussuge

Journal of Materials Science· Volume 43· Issue 12
Publisher page

Abstract

This paper summarises the work that has been done in the framework of the French programme PROMETHEREF. This programme was concerned with the thermomechanical properties at high temperature of two industrial refractories: fused-cast materials for glass melting and alumina castables for steel production. At high temperature, both materials exhibit creep, that has been characterised by tension, compression and bending tests. The microstructural mechanisms of deformation have been investigated and allowed the macroscopic viscoplasticity to be understood. Both types of materials exhibit damage processes that have also been characterised mechanically and microstructurally. The nature and the adhesion of the aggregates have been shown to have a great influence on the mechanical behaviour of the castables, as well as the continuous zirconia skeleton observed in high-zirconia fused-cast refractories by X-rays tomography.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Boussuge M (2004) PROMETHEREF: a French research program for the study of thermomechanical properties of industrial refractories. Euro-Ceramics 8, 8th European ceramic society conf. proc, Istanbul, Turkey, June 29–July 3 2003, Key Eng Mater, vol 264–268, Part 3, p 175510.4028/www.scientific.net/KEM.264-268.1755 ↗
2. Boussuge M (2003) Study of thermomechanical properties of industrial refractories: the French program PROMETHEREF. UNITECR ‘03, proceedings of the 8th unified international technical conference on refractories, Osaka, Japan, 19–22 October, p 513
3. Boussuge M (2004) Thermomechanical behaviour: from ceramics to refractories. Fourth int. symp. on advances in refractories for the metallurgical industries proc., 43rd annual conference of metallurgists, Hamilton, Canada, 22–25 August, p 605
4. Massard L (2005) Etude du fluage de réfractaires électrofondus du système alumine-zircone-silice. PhD Thesis, Ecole des Mines de Paris
5. Madi K (2006) Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus. PhD Thesis, Ecole des Mines de Paris
6. Lataste E (2005) Comportement mécanique et endommagement de réfractaires électrofondus sous sollicitation thermomécanique. PhD Thesis, INSA Lyon
7. Yeugo-Fogaing E (2006) Caractérisation à haute température des propriétés d’élasticité de réfractaires électrofondus et de bétons réfractaires. PhD Thesis, Université de Limoges
8. Marzagui H (2005) Etude de deux bétons réfractaires silico-alumineux: microstructures et comportements thermomécaniques en traction et en flexion. PhD Thesis, Ecole des Mines d’Albi-Carmaux
9. Roosefid M (2006) Etude du comportement thermomécanique de deux bétons réfractaires silico-alumineux: applications à une poche d’aciérie. PhD Thesis, Institut National Polytechnique de Grenoble
10. Begley ER, Herndon PO (1971) Zirconia–alumina–silica refractories. In: Alper AM (ed) High temperature oxides, vol. 5-IV, Academic Press, p 18510.1016/B978-0-12-053304-6.50016-3 ↗
11. Duvierre G, Boussant-Roux Y, Nelson M (1999) Fused zirconia or fused AZS: which is the best choice? Ceram Eng Sci Proc 20(1):65
12. Boussuge M (2007) Recent advances in the study of the thermomechanical properties of fused-cast refractories at macro and micro scales. 10th European ceramic society proc., Berlin, 17–21 June 2007, to be published in J Eur Ceram Soc
13. https://doi.org/www.amiravis.com
14. Madi K, Forest S, Boussuge M, Gailliègue S, Lataste E, Buffière JY, Bernard D, Jeulin D (2007) Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography. Comput Mater Sci 39:22410.1016/j.commatsci.2006.01.033 ↗
15. Madi K, Forest S, Cordier P, Boussuge M (2005) Numerical study of creep in two-phase aggregates with a large rheology contrast: implications for the lower mantle. Earth Planet Sci Lett 235:22310.1016/j.epsl.2005.06.027 ↗
16. Gault C (1989) Ultrasonic non-destructive evaluation of microstructural changes and degradation of ceramics at high temperature. In: Holbrook J, Bussière J (eds) Nondestructive monitoring of materials properties, vol 142. MRS, p 26310.1557/PROC-142-263 ↗
17. Huger M, Fargeot D, Gault C (2002) High temperature measurement of ultrasonic wave velocity in refractory materials. High Temp. High Press 34:19310.1068/htwu115 ↗
18. Tessier-Doyen N, Glandus JC, Huger M (2006) Untypical Young’s modulus evolution of model refractories at high temperature. J Eur Ceram Soc 26:28910.1016/j.jeurceramsoc.2004.10.028 ↗
19. Yeugo-Fogaing E, Huger M, Gault C (2007) Elastic properties and microstructure: study of two fused cast refractory materials. J Eur Ceram Soc 27(2–3):184310.1016/j.jeurceramsoc.2006.04.149 ↗
20. Yeugo-Fogaing E, Lorgouilloux Y, Huger M, Gault C (2006) Young’s modulus of zirconia at high temperature. J Mater Sci Lett 41:7663
21. Bansal GK, Heuer AH (1972) “On a martensitic phase transformation in zirconia (ZrO2)—I. Metallographic evidence. Acta Metall 20(11):128110.1016/0001-6160(72)90059-4 ↗
22. Bansal GK, Heuer AH (1974) “On a martensitic phase transformation in zirconia” (ZrO2)—II. Crystallographic aspects. Acta Metall 22(4):40910.1016/0001-6160(74)90093-5 ↗
23. Kelly PM, Rose LRF (2000) The martensitic transformation in ceramics-Its role in transformation toughening. Prog Mater Sci 47:46310.1016/S0079-6425(00)00005-0 ↗
24. Sands CM, Henderson RJ, Chandler HW (2007) A three dimensional computational model of the mechanical response of a dual-phase ceramic. Comput Mater Sci 39:86210.1016/j.commatsci.2006.10.015 ↗
25. Huger M, Tessier-Doyen N, Chotard T, Gault C (2007) Microstructural effects associated to CTE mismatch for enhancing the thermal shock resistance of refractories: Investigation by high temperature ultrasounds. Ceramic Forum International, Special issue on “mechanical and thermal behaviour of refractories”, p E93
26. Lawn B (1993) Fracture of brittle solids, 2nd edn. Cambridge University Press10.1017/CBO9780511623127 ↗
27. Ohtsu M (1999) Estimation of crack and damage progression in concrete by quantitative acoustic emission analysis. Mater Eval 521
28. Ohtsu M, Watanabe H (2001) Quantitative damage estimation of concrete by acoustic emission. Const Build Mater 15:21710.1016/S0950-0618(00)00071-4 ↗
29. Massard L, Madi K, Boussuge M, Forest S, Yeugo-Fogaing E, Huger M, Gault C (2004) High temperature mechanical behaviour of fused-cast refractories. Fourth int. symp. on advances in refractories for the metallurgical industries proc., 43rd annual conference of metallurgists, Hamilton, Canada, 22–25 August, p 631
30. Muto H, Sakai M (1998) Grain-boundary sliding and grain interlocking in the creep deformation of two-phase ceramics. J Am Ceram Soc 81(6):161110.1111/j.1151-2916.1998.tb02523.x ↗
31. Wilkinson DS (1998) Creep mechanisms in multiphase ceramic materials. J Am Ceram Soc 81(2):27510.1111/j.1151-2916.1998.tb02333.x ↗
32. Lemaitre J, Chaboche JL (1990) Mechanics of solid materials. Cambridge University Press10.1017/CBO9781139167970 ↗
33. Boussuge M (2004) Thermomechanical behaviour: from ceramics to refractories. In: “Advances in refractories for the metallurgical industries IV” proc., 4th Int.Symp, Hamilton, Canada, 22–25 August, p 605
34. Schmitt N, Hernandez J-F, Lamour V, Berthaud Y, Meunier P, Poirier J (2000) Coupling between kinetics of dehydration, physical and mechanical behaviour for high alumina castable. Cement Concr Res 30:159710.1016/S0008-8846(00)00342-2 ↗
35. Marzagui H, Cutard T, Yeugo-Fogaing E, Huger M, Gault C, Prompt N, Deteuf C (2004) Microstructural changes and high temperature mechanical behavior of an andalusite based low cement castable. Fourth int. symp. on advances in refractories for the metallurgical industries proc., 43rd annual conference of metallurgists, Hamilton, Canada, 22–25 August, p 331
36. Marzagui H, Cutard T (2004) Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM. J Mater Process Technol 155–156(11):147410.1016/j.jmatprotec.2004.04.365 ↗
37. Nazaret F, Marzagui H, Cutard T (2006) Influence of mechanical behaviour specificities of damaged refractory castables on the Young’s modulus determination. J Eur Ceram Soc 26(8):142910.1016/j.jeurceramsoc.2005.03.231 ↗
38. Marzagui H, Cutard T, Roosefid M, Ouedraogo E, Prompt N, Deteuf C (2004) Room temperature mechanical behaviour of two refractory castables. Fourth int. symp. on advances in refractories for the metallurgical industries proc., 43rd annual conference of metallurgists, Hamilton, Canada, 22–25 August, p 645
39. Roosefid M, Ouedraogo E, Marzagui H, Cutard T, Prompt N, Deteuf C (2005) Thermomechanical behaviour of two refractory castables. In: UNITECR ‘05, Proceedings of the 9th unified international technical conference on refractories, Jeffrey D. Smith (ed), Wiley-American Ceramic Society, 8–11 November, Orlando, Florida, USA, p 1003
40. Mazars J (1984) Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. Doctorat Es-Sciences Physiques, Université Paris VI
41. Mazars J (1986) A description of micro and micro-scale damage of concrete structure. Eng Fract Mech 25:72910.1016/0013-7944(86)90036-6 ↗
42. Mazars J, Pijaudier-Cabot G (1989) Continuum damage theory—application to concrete. J Eng Mech, ASCE 115:34510.1061/(ASCE)0733-9399(1989)115:2(345) ↗
43. Mazars J, Pijaudier-Cabot G (1996) From damage to fracture mechanics and conversely: a combined approach. Int J Solids Struct 33(20–22):332710.1016/0020-7683(96)00015-7 ↗