Preparation of UV-curable intercalated/exfoliated epoxide/acrylateclays nanocomposite resins
Source abstract
Abstract
Preparation of UV-curable intercalated/exfoliated epoxide/acrylateclays nanocomposite resins with the addition of specific monomers and solvent via the consideration of solubility parameter and chemical reactivity was carried out in this work. Due to the good compatibility with surfactant in acrylateclays and the cationic oligomer in resin matrix, the two additive monomers dispersed uniformly in resin matrix with the swollen acrylateclays before UV curing. As revealed by conversion ratio and DTG analyses, chemical bonds between the two additive monomers, the cationic oligomers and surfactant in acrylateclays were formed during UV irradiation. This, in turn, generated a hybrid acrylate-based/epoxy network and effectively enlarged the lamellae spacing of inorganic clays in nanocomposite resins prepared in this work. The XRD and TEM characterizations revealed that the intercalated clay domains containing exfoliated lamellae about 1 nm in thickness uniformly disperse in polymeric matrix. The nanocomposite resin containing 5 wt.% inorganic filler possessed the physical properties as follows: T d-5% = 213 °C, CTE = 80.5 ppm/°C, moisture absorption = 6.12%, average optical transmittance = 83.17%, and adhesion strength on glass substrate = 43.8 kgf/cm2. The analyses above indicated that the formation of polymeric interpenetrating networks and nanometer-scale exfoliation of clay lamellae not only improve the thermal properties and resistance to moisture permeation, but also retain highly optical transmittance and satisfactory adhesion strength of nanocomposite resins prepared in this work. A better device lifetime property was hence achieved when the nanocomposite resins were applied to the packaging of OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photopolymerization techniques and applications · Silicone and Siloxane Chemistry · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Nagata H, Shiroishi M, Miyama Y, Mitsugi N, Miyamoto N (1995) Opt Fib Tech 1:28310.1006/ofte.1995.1020 ↗
2. Baikerikar KK, Scranton AB (2001) Polym 42:43110.1016/S0032-3861(00)00388-8 ↗
3. Chou YC, Wang YY, Hsieh TE, J Appl Polym Sci (accepted)
4. Wang YY, Hsieh TE, IEEE Trans Adv Package (accepted)
5. Decker C, Zahouily K, Keller L, Benfarhi S, Bendaikha T (2002) J Mater Sci 37:483110.1023/A:1020818414927 ↗
6. Keller L, Decker C, Zahouily K, Benfarhi S, Le Meins JM, Miehe-Brendle J (2004) Polym 45:743710.1016/j.polymer.2004.08.040 ↗
7. Shemper BS, Morizur JF, Alirol M, Domenech A, Hulin V, Mathias LJ (2004) J Appl Polym Sci 93:125210.1002/app.20580 ↗
8. Benfarhi S, Decker C, Keller L, Zahouily K (2004) Eur Polym J 40:49310.1016/j.eurpolymj.2003.11.009 ↗
9. Uhl FM, Davuluri SP, Wong SC, Webster DC (2004) Polym 45:617510.1016/j.polymer.2004.07.001 ↗
10. Wang YY, Hsieh TE (2005) Chem Mater 17:333110.1021/cm0487268 ↗
11. Chiang TH, Hsieh TE (2005) J Adhes Sci Tech 1:110.1163/1568561053066927 ↗
12. Decker C, Nguyen Thi Viet T, Decker D, Weber-Koehl E (2001) Polym 42:553110.1016/S0032-3861(01)00065-9 ↗
13. Sui G, Zhang ZG, Chen CQ, Zhong WH (2002) Mater Chem Phys 78:34910.1016/S0254-0584(01)00553-3 ↗
14. Jana RN, Mukunda PG, Nando GB (2003) Polym Degrad Stab 80:7510.1016/S0141-3910(02)00385-3 ↗
15. Remiro PM, Cortazar M, Calahorra E, Calafel MM (2002) Polym Degrad Stab 78:8310.1016/S0141-3910(02)00122-2 ↗
16. Basfer AA (2002) Polym Degrad Stab 77:22110.1016/S0141-3910(02)00037-X ↗
17. Crivello JV, Varlemann U (1995) J Polym Sci 33:247310.1002/pola.1995.080331421 ↗
18. Wen J, Wikes GL (1996) Chem Mater 8:166710.1021/cm9601143 ↗
19. Fischer HR, Gielgens LH, Koster TPM (1999) Acta Polym 50:12210.1002/(SICI)1521-4044(19990401)50:4<122::AID-APOL122>3.0.CO;2-X ↗
20. Petrović ZS, Javni I, Waddon A, Bánhegyi G (2000) J Appl Polym Sci 76:13310.1002/(SICI)1097-4628(20000411)76:2<133::AID-APP3>3.0.CO;2-K ↗
21. Zhu ZK, Yang Y, Yin J, Wang XY, Ke YC, Qi ZN (1999) J Appl Polym Sci 73:206310.1002/(SICI)1097-4628(19990912)73:11<2063::AID-APP1>3.0.CO;2-Q ↗
22. Burnside SD, Giannelis EP (1995) Chem Mater 7:159710.1021/cm00057a001 ↗
23. Fu X, Qutubuddin S (2001) Polym 42:80710.1016/S0032-3861(00)00385-2 ↗
24. Lee DK, Char KK (2002) Polym Degrad Stab 75:55510.1016/S0141-3910(01)00259-2 ↗
25. Laubender J, Chkoda L, Sokolowski M, Umbach E (2000) Synth Met 111–112:37310.1016/S0379-6779(99)00331-8 ↗
26. Yano K, Usuki A, Okada A, Kurauchi T, Kamigatio O (1993) J Polym Sci A Polym Chem 31:249310.1002/pola.1993.080311009 ↗