Current-activated pressure-assisted sintering (CAPAS) and nanoindentation mapping of dual matrix composites
Source abstract
Abstract
Titanium boride (TiBw) whiskers are currently recognized as one of the most compatible reinforcements for titanium (Ti) that have positively affected its wear resistance and stiffness. The fracture toughness and ductility have, however, been reported to deteriorate at increased TiBw volume fractions, mainly due to the interlocking of these brittle TiB whiskers. This article investigates the processing of dual matrix Ti–TiBw composites, where microstructures are generated consisting of TiBw–Ti composite regions separated by a ductile, predominantly Ti, outer matrix. This microstructural design has the potential to prevent the continuous TiBw interlocking over the scale of the composite (at high TiBw volume fractions), and promote improved toughness of the material. The processing of these unique composites using current-activated pressure-assisted sintering (CAPAS) is discussed in this article. The effect of processing temperature on the microstructure and hardness of Ti–TiBw dual matrix composites is also discussed, together with a simultaneous imaging and modulus-mapping nanoindentation technique used to characterize the composites
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Gorsse S, Chaminade JP, Petitcorps YL (1998) Composites Part A 29(A):122910.1016/S1359-835X(98)00080-3 ↗
2. Morsi K, Patel VV (2007) J Mater Sci 42:203710.1007/s10853-006-0776-2 ↗
3. Banerjee R, Collins PC, Fraser HL (2002) Adv Eng Mater 4(11):84710.1002/1527-2648(20021105)4:11<847::AID-ADEM847>3.0.CO;2-C ↗
4. Nardone VC, Strife JR, Prewo KM (1991) Metal Mater Trans 22A:17110.1007/BF03350959 ↗
5. Deng X, Patterson BR, Chawla KK, Koopman MC, Fang Z, Lockwood G, Griffo A (2001) Int J Refractory Metals Hard Mater 19:54710.1016/S0263-4368(01)00060-9 ↗
6. Deng X, Patterson BR, Chawla KK, Koopman MC, Mackin C, Fang Z, Lockwood G, Griffo A (2002) J Mater Sci Lett 21:70710.1023/A:1015733005094 ↗
7. Fang Z, Lockwood G, Griffo A (1999) Metal Mater Trans 30A:323110.1007/s11661-999-0233-3 ↗
8. Morsi K, Patel VV, Naraghi S, Garay JE (2008) J Mater Process Technol 196(1):23610.1016/j.jmatprotec.2007.05.047 ↗
9. Munir ZA, Anselmi-Tamburini U, Ohyanagi M (2006) J Mater Sci 41:76310.1007/s10853-006-6555-2 ↗
10. Anselmi-Tamburini U, Garay JE, Munir ZA (2005) Mater Sci Eng A 407:2410.1016/j.msea.2005.06.066 ↗
11. Garay JE, Anselmi-Tamburini U, Munir ZA (2003) Acta Mater 51:448710.1016/S1359-6454(03)00284-2 ↗
12. Garay JE, Glade SC, Anselmi-Tamburini U, Asoka-Kumar P, Munir ZA (2004) Appl Phys Lett 85(4):57310.1063/1.1774268 ↗
13. Wang X, Casolco SR, Xu G, Garay JE (2007) Acta Mater 55:361110.1016/j.actamat.2007.02.022 ↗
14. Feng H, Zhou Y, Jia D, Meng Q (2004) Compos Sci Technol 64(16):249510.1016/j.compscitech.2004.05.013 ↗
15. Feng H, Jia D, Zhou Y (2005) Composites: Part A 36:55810.1016/j.compositesa.2004.09.003 ↗
16. Panda KB, Ravi Chandran KS (2003) Metal Mater Trans 34A(6):137110.1007/s11661-003-0249-z ↗
17. Stephen AJ, Houston JE (1991) Rev Sci Instrum 62(3):71010.1063/1.1142072 ↗
18. Pethica JB, Oliver WC (1987) Phys Scr T19A:6110.1088/0031-8949/1987/T19A/010 ↗
19. Syed Asif SA, Wahl KJ, Colton RJ (1999) Rev Sci Instrum 70(5):240810.1063/1.1149769 ↗
20. Oliver WC, Pharr GM (1992) J Mater Res 7(6):156410.1557/JMR.1992.1564 ↗
21. Uskokovic PS, Tang CY, Tsui CP, Ignjatovic N, Uskokovic DP (2007) J Eur Ceram Soc 27(2–3):155910.1016/j.jeurceramsoc.2006.04.122 ↗
22. Moon KS, Morsi K, Hong YK (2007) Int J Optomechatron 1:110.1080/15599610701385503 ↗
23. Chakravartula A, Komvopoulos K (2006) Appl Phys Lett 88:13190110.1063/1.2189156 ↗
24. Gorsse S, Miracle DB (2003) Acta Mater 51:242710.1016/S1359-6454(02)00510-4 ↗