journal article·2004-12

Fatigue behavior of AISI 347 stainless steel in various environments

Chih-Kuang Lin, I-Lon Lan

Journal of Materials Science· Volume 39· Issue 23
Publisher page

Abstract

The aim of this study is to investigate the influence of environmental factors, including pH, chloride ion, and pitting inhibitor, on the fatigue properties of AISI 347 stainless steel. Systematic fatigue tests, including both high-cycle fatigue (HCF, S-N curves) and fatigue crack growth (FCG, da/dN-ΔK curves), have been conducted in air and several aqueous environments. Results showed the HCF strength was markedly reduced in an acid solution and in a chloride-containing solution, as compared to the air value. An addition of pitting inhibitor could restore the HCF strength in salt water back to the level in atmospheric air by preventing the formation of corrosion pits and decreasing the corrosion rate. However, the corresponding stage II FCG rates in all given environments were almost equivalent. These results indicated that the variation of chemistry in bulk environment exerted more influence on the fatigue crack nucleation than on the extension of long fatigue cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. W. F. Smith, in "Structure and Properties of Engineering Alloys," 2nd ed. (McGraw Hill, Inc., New York, 1993) p. 317.
2. I. Ben-Haroe, A. Rosen and I. W. Hall, Mater. Sci. Tech. 9(1993) 620.10.1179/mst.1993.9.7.620 ↗
3. R. Ayer, C. F. Klein and C. N. Marzinsky, Metall. Trans.A 23(1992) 2455.10.1007/BF02658049 ↗
4. J. Hickling and N. Wieling, Corrosion 37(1981) 147.10.5006/1.3622158 ↗
5. D. P. Schweinsberg, B. Sun and V. Otieno-Alego, J. Appl. Electrochem. 24(1994) 803.10.1007/BF00578098 ↗
6. D. P. Schweinsberg, B. Sun, M. Cheng and H. Flitt, ibid. 23(1993) 1097.10.1007/BF00625581 ↗
7. Idem., Corrosion Sci. 36(1994) 361.10.1016/0010-938X(94)90162-7 ↗
8. W. Tyson, Metall. Trans.A 15(1984) 1475.10.1007/BF02648577 ↗
9. P. Rozenak and D. Eliezer, Mater. Sci. Eng. 61(1983) 31.10.1016/0025-5416(83)90123-4 ↗
10. Idem., Metall. Trans.A 20(1989) 2187.10.1007/BF02650309 ↗
11. P. Rozenak, J. Mater. Sci. 25(1990) 2532.10.1007/BF00638055 ↗
12. D. N. Gladwin, R. H. Priest and D. A. Miller, Mater. Sci. Tech. 5(1989) 40.10.1179/mst.1989.5.1.40 ↗
13. B. A. Senior, Mater. Sci. Eng.A 130(1990) 51.10.1016/0921-5093(90)90080-M ↗
14. B. A. Senior, J. Maguire and C. A. Evans, ibid. 138(1991) 103.10.1016/0921-5093(91)90680-L ↗
15. S. R. Ortner and C. A. Hippsley, Mater. Sci. Tech. 8(1992) 883.10.1179/mst.1992.8.10.883 ↗
16. Idem., ibid. 11(1995) 998.
17. "ASM International Handbook Committee," in "Metals Handbook, 10th ed., Vol. 1, Properties and Selection: Irons, Steels, and High-Performance Alloys" (ASM International, Materials Park, OH, USA, 1990) p. 870.
18. C.-K. Lin and S.-T. Yang, Eng. Fract. Mech. 59(1998) 779.10.1016/S0013-7944(97)00173-2 ↗
19. J. R. Daviss, "Corrosion: Understanding the Basics" (ASM International, Materials Park, OH, USA, 2000) p. 427.10.31399/asm.tb.cub.t66910427 ↗
20. K. J. Miller and R. Akid, Proc. R. Soc. Lond.A 452(1996) 1411.10.1098/rspa.1996.0072 ↗
21. C.-K. Lin and W.-J. Tsai, Fatigue Fract. Eng. Mater. Struct. 23(2000) 489.10.1046/j.1460-2695.2000.00313.x ↗
22. C.-K. Lin, W.-C. Fan and W.-J. Tsai, Corrosion 58(2002) 904.10.5006/1.3280780 ↗
23. C. Laird and D. J. Duquette, in "Corrosion Fatigue: Chemistry, Mechanics and Microstructure," edited by O. Devereux, A. J. McEvily and R. W. Staehle (National Association of Corrosion Engineers, Houston, USA, 1972) p. 88.
24. D. J. Mcadam, Proc. ASTM 26(1926) 224.
25. R. P. Wei and M. Gao, in "Hydrogen Effects on Mechanical Behavior," edited by N. R. Moody and A. W. Thompson (The Minerals, Metal and Materials Society, Warrendale, PA, USA, 1990) p. 789.
26. S. Suresh, G. F. Zamiski and R. O. Ritchie, Metall. Trans.A 12(1981) 1435.10.1007/BF02643688 ↗
27. S. Suresh, A. K. Vasudevan and P. E. Bretz, ibid. 15(1984) 369.10.1007/BF02645122 ↗
28. B. F. Brown, C. T. Fujii and E. P. Dahlberg, J. Electrochem. Soc. 116(1969) 218.10.1149/1.2411799 ↗
29. G. Sandoz, C. T. Fujii and B. F. Brown, Corrosion Sci. 10(1970) 839.10.1016/S0010-938X(70)80102-0 ↗