journal article·2004-04

Cyclic deformation behaviour of a nickel base alloy at elevated temperature

G. Chai, P. Liu, J. Frodigh

Journal of Materials Science· Volume 39· Issue 8
Publisher page

Abstract

Low cycle fatigue tests for a hot extruded Nickel base alloy tube material have been performed at room temperature and at 204°C. The alloy shows a normal hardening and softening cyclic stress-strain response at room temperature. At 204°C, however, the cyclic stress-strain response shows a strain hardening first, followed by a relatively stable stress and finally a secondary cyclic strain hardening. This stable stress disappears with increasing strain amplitude. The mechanisms of the secondary cyclic strain hardening have also been investigated by transmission electron microscopy (TEM). Besides dislocation multiplication, interactions between stacking faults and moving dislocations and between interstitial atoms and moving dislocations could also contributed to this secondary cyclic strain hardening. The formation of micro-twins during cyclic loading at 204°C and its influence on the cyclic stress-strain response were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. D. L. Harrod, R. E. Gold and R. J. Jacko JOM July (2001) 14.10.1007/s11837-001-0080-1 ↗
2. B. Mukherjee et al., J. Nucl. Technol. 55 (1981) 505.10.13182/NT55-505 ↗
3. A. F. Armas, O. R. Bettin, I. Alvarez-Armas and G. H. Rubiolo J. Nucl. Mater. 155 (1988) 646.
4. M. Valsan, K. B. S. Rao, M. G. Castelli and J. R. Ellis Scripta Metall. Mater. 33 (1995) 1005.10.1016/0956-716X(95)00320-U ↗
5. R. Zauter, F. Petry, H. J. Christ and H. Mughrabi, in “Thermomechanical Fatigue Behavior of Materials,” ASTM STP 1186 (1993) p. 70.10.1520/STP24250S ↗
6. M. Valsan, D. H. Sastry, K. B. S. Rao and S. L. Manna Metall. Mater. Trans. A. 25 (1994) 159.10.1007/BF02646684 ↗
7. J. O. Nilsson Scripta Metall. Mater. 17 (1983) 593.10.1016/0036-9748(83)90383-6 ↗
8. H. Abdel-Raouf, A. Plumtree and T. H. Topper Metall. Trans. 5 (1974) 274.10.1007/BF02642951 ↗
9. K. D. Challenger and J. Moteff ibid. 3 (1972) 1675.10.1007/BF02643067 ↗
10. A. Girones, Ph.D Thesis, Universitat Politecnica de catalunya, Barcelona, Spain, 2003.
11. C. Laird, in “Physical Metallurgy,” edited by R. W. Cahn and P. Haasen (North-Holland, 1996) p. 2294.
12. S. J. Basinski, Z. S. Basinski and A. Howie Phil. Mag. 19 (1969) 899.10.1080/14786436908225856 ↗
13. L. P. Kubin, K. Chihab and Y. Estrin Acta Metall. 36 (1988) 2707.10.1016/0001-6160(88)90117-4 ↗
14. J. M. Robinson and M. P. Shaw Inter. Mater. Reviews 39 (1994) 113.10.1179/imr.1994.39.3.113 ↗
15. S. Cho, Y. Yoo and J. J. Jonas J. Mater. Sci. 19 (2000) 2019.
16. L. E. Murr, C. Niou, S. Pappu, J. M. Rivas and S. A. Quinones Phys. Sta. Sol. (a) 149 (1955) 253.10.1002/pssa.2211490118 ↗
17. Z. W. Huang and P. Bowen Acta Metall. Mater. 47 (1999) 3189.10.1016/S1359-6454(99)00184-6 ↗