Energy absorption and damage propagation in 2D triaxially braided carbon fiber composites: effects of in situ matrix properties
Source abstract
Abstract
Results from an experimental program to investigate the propagation of damage and energy dissipation in 2D triaxially braided carbon fiber textile composites (2DTBC) under static conditions are reported. A methodology is presented in which classical concepts from fracture mechanics are generalized to address damage growth in an orthotropic and heterogeneous structural material. Along with results from the experimental program, a novel numerical technique that employs ideas from cohesive zone modeling, and implemented through the use of finite-element analysis, is also presented. The inputs that are required for the discrete cohesive zone model (DCZM) are identified. Compact tension specimen fracture tests and double notched tension tests were carried out to measure the fracture energy (GIc), and the maximum cohesive strength (σc), of the 2DTBC. The DCZM modeling strategy was independently verified by conducting single edge notched three-point bend tests using a modified three-point bend test fixture. The experimental and numerical analyses were carried out for two different types of 2DTBC made from the same textile architecture but infused with two different resin systems to validate the proposed methodology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Beard SJ, Chang FK (2002) Int J Crashworthiness 7(2):191. doi:https://doi.org/10.1533/cras.2002.021410.1533/cras.2002.0214 ↗
2. Quek SC, Waas AM, Shahwan KW, Agaram V (2003) Int J Mech Sci 45(6–7):1077. doi:https://doi.org/10.1016/j.ijmecsci.2003.09.00310.1016/j.ijmecsci.2003.09.003 ↗
3. Haywood JB (2006) Sci Am 295(3):9410.1038/scientificamerican0706-94 ↗
4. Reifsnider KL, Case SW (2002) Damage tolerance and durability of material systems. Wiley
5. Gonzales L, Knauss WG (2002) Int J Fract 118(4):363. doi:https://doi.org/10.1023/A:102335111532210.1023/A:1023351115322 ↗
6. Hertzberg J (1983) Deformation and fracture mechanics of engineering materials. Wiley
7. Xie D, Biggers SB Jr (2006) Eng Fract Mech 73:771. See also, Xie D, Biggers SB Jr (2006) Finite Elem Anal Design 42(11):977. doi:https://doi.org/10.1016/j.finel.2006.03.00710.1016/j.finel.2006.03.007 ↗
8. Xie D, Biggers SB Jr (2006) Eng Fract Mech 73:786. doi:https://doi.org/10.1016/j.engfracmech.2005.07.01410.1016/j.engfracmech.2005.07.014 ↗
9. Xie D, Waas AM, Shahwan KW, Schroeder JA, Boeman RG (2004) Comput Model Eng Sci 6:515
10. Xie D, Waas AM (2006) Eng Fract Mech 73:1783. doi:https://doi.org/10.1016/j.engfracmech.2006.03.00610.1016/j.engfracmech.2006.03.006 ↗
11. Xie D, Chung J, Waas AM, Shahwan KW, Schroeder JA, Boeman RG, Kunc V, Klett LB (2005) Int J Fract 134:231. doi:https://doi.org/10.1007/s10704-005-0646-y10.1007/s10704-005-0646-y ↗
12. Xie D, Salvi AG, Sun C, Waas AM, Caliskan A (2006) J Compos Mater 40:2025. doi:https://doi.org/10.1177/002199830606132010.1177/0021998306061320 ↗
13. Pietruszczak S, Mroz Z (1981) Int J Numer Methods Eng 17:327. doi:https://doi.org/10.1002/nme.162017030310.1002/nme.1620170303 ↗
14. Ungsuwarungsri T, Knauss WG (1987) Int J Fract 5:221. See also PhD Thesis (1985) Aeronautics Department, Caltech, Pasadena, CA10.1007/BF00015590 ↗
15. Tvergaard V, Hutchinson JW (1992) J Mech Phys Solids 40:1377. doi:https://doi.org/10.1016/0022-5096(92)90020-310.1016/0022-5096(92)90020-3 ↗
16. Schellekens JCJ, de Borst R (1993) Int J Numer Methods Eng 36:43. doi:https://doi.org/10.1002/nme.162036010410.1002/nme.1620360104 ↗
17. Xu XP, Needleman A (1994) J Mech Phys Solids 42:1397. doi:https://doi.org/10.1016/0022-5096(94)90003-510.1016/0022-5096(94)90003-5 ↗
18. Camacho GT, Ortiz M (1996) Int J Solids Struct 33:2899. doi:https://doi.org/10.1016/0020-7683(95)00255-310.1016/0020-7683(95)00255-3 ↗
19. Reedy ED, Mello FJ, Guess TR (1997) J Compos Mater 31:81210.1177/002199839703100804 ↗
20. Pandolfi A, Krysl P, Ortiz M (1999) Int J Fract 95:279. doi:https://doi.org/10.1023/A:101867292273410.1023/A:1018672922734 ↗
21. Espinosa HD, Zavattieri PD, Dwivedi SK (1998) J Mech Phys Solids 46:1909. doi:https://doi.org/10.1016/S0022-5096(98)00027-110.1016/S0022-5096(98)00027-1 ↗
22. Zavattieri PD, Raghuram PV, Espinosa HD (1002) J Mech Phys Solids 49:2710.1016/S0022-5096(00)00028-4 ↗
23. Li S, Thouless MD, Waas AM, Schroeder JA, Zavattieri PD (2006) Eng Fract Mech 73:6410.1016/j.engfracmech.2005.07.004 ↗
24. Gustafson PA, Waas AM (2007) “Experimental results and numerical analysis of high temperature bonded composite joints: Kriging sensitivity analysis of common adhesive tests”. ASME Congress presentation, November
25. Anderson TL (1995) Fracture mechanics, 2nd edn. CRC Press LLC
26. Salvi AG, Waas AM, Caliskan A (2004) Polym Compos 25(4):39710.1002/pc.20033 ↗
27. Salvi AG, Waas AM, Caliskan A (2004) Compos Sci Technol 64:8310.1016/S0266-3538(03)00214-8 ↗
28. Turner TA, Warrior NA, Robitaille F (2005) Compos A Appl Sci Manuf 36(9):129110.1016/j.compositesa.2005.01.012 ↗