journal article·2004-04

Comparison between techniques based on charge characterisation and capillary suction time for assessing the dispersion characteristics of concentrated slurry

B. P. Singh, S. Bhattacharjee, L. Besra, D. K. Sengupta

Journal of Materials Science· Volume 39· Issue 7
Publisher page

Abstract

Achieving a stable dispersion with high solid loading is pre-requisite in many conventional/emerging ceramic forming processes. Hence, assessing the quality of dispersion is one of the critical aspects to be considered during forming process to ensure the final product quality. There are several direct/indirect techniques to assess the quality of dispersion. Many are optical methods, which generally require dilution of the suspension, with consequent alteration of the equilibria. This complicates the system unless particular care is taken to compensate for the dilution process. Many times it has been observed that a dispersant, that provides good dispersion at low solids concentration will not necessarily provide good dispersion at high solids concentration. This paper compares two indirect techniques, namely, particle charge detector (PCD) using the principle of ‘Streaming Potential’ and capillary suction time (CST) apparatus based on the principle of capillary suction pressure to study the effectiveness of a dispersant for maximum dispersibility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. P. Somasundaran, B. Markovic, S. Krishnakumar and X. U. Colloid Systems and Interfaces Stability of Dispersions Through Polymer and Surfactant Adsorption, in “Handbook of Surfaces and Colloid Chemistry, edited by K. S. Birdi (CRC Press, Boca Raton, New York, 1997).
2. S. Chander Coll. Surf. A: Physicochem. Engin. Asp. 133 (1988) 143.10.1016/S0927-7757(97)00134-9 ↗
3. R. R. Klimpel Introduction to Chemicals Used in Particle System, in “Paticle Science and Technology,” edited by R. Rajagopalan (The NSF Engineering Research Centre for Particle Science and Technology, Florida, 1999).
4. P. Somasundaran, Y. B. Huang and C. C. Gryte Powd. Techn. 53 (1987) 73.80.10.1016/0032-5910(87)80127-4 ↗
5. B. P. Singh, L. Besra and S. Bhattacharjee Coll. Surf. A: Physicochem. Engin. Asp. 204(1–3) (2002) 175.10.1016/S0927-7757(01)01130-X ↗
6. B. P. Singh, S. Bhattacharjee and L. Besra Ceram. Intern. 28(4) (2002) 413.10.1016/S0272-8842(01)00111-0 ↗
7. Laxmidhar Besra, Dilip K. Sengupta, Bimal P. Singh and Sarama Bhattacharjee J. Amer. Ceram. Soc. 2003 (Accepted).
8. Bimal P. Singh, S. Bhattacharjee, L. Besra and Dilip K. Sengupta Ceram. Intern. 2003 (Accepted).
9. S. Bhattacharjee, B. P. Singh and L. Besra J. Coll. Interf. Sci. 2002 (Communicated).