journal article·2008-11

Elevated temperature sliding wear behavior of WCP-reinforced ferrous matrix composites

Yan-pei Song, Hua Yu, Jun-guang He, Hui-gai Wang

Journal of Materials Science· Volume 43· Issue 22
Publisher page

Abstract

WCP-reinforced ferrous matrix composites were processed by direct addition of WCP (100–150 μm) and the melt of the matrix alloy to a rotating mold at 1000 rpm. Dry sliding wear behaviors of the composites containing about 80 vol.% of WCP and high-speed steel counterpart were investigated at room temperature and 400 °C against a rotating die steel ring. And wear experiments were performed under loads of 50, 100, and 150 N and a fixed sliding velocity of 30 m/s. Results show that at room temperature, both materials exhibited a marked increase in wear rate with load applied. Wear rates of the composites and high-speed steel under loads of 50, 100, and 150 N at room temperature achieved 1.61 × 10−6, 2.14 × 10−6, 3.56 × 10−6, and 3.11 × 10−6, 23.08 × 10−6, 57.39 × 10−6 g/m, respectively. At a testing temperature of 400 °C, the composites exhibited a marked increase in wear rates and high-speed steel exhibited mild wear (characterized by extremely low wear rates) over the range of loads considered in these experiments. Wear rates of both the composites and high-speed steel at 400 °C achieved 2.42 × 10−6, 5.19 × 10−6, 6.64 × 10−6, and 4.1 × 10−6, 8.92 × 10−6, 26.02 × 10−6 g/m, respectively, under different loads. Finally, the wear-mechanism was discussed in this article.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Hosking FM, Folgar Portillo F, Wunderlin R, Mehrabian R (1982) J Mater Sci 17:47710.1007/BF00591483 ↗
2. Girot FA, Quenisset JM, Naslain R (1987) Compos Sci Technol 30:15510.1016/0266-3538(87)90007-8 ↗
3. Rohatgi PK, Asthana R, Das S (1986) Int Mater Rev 31(3):11510.1179/imr.1986.31.1.115 ↗
4. Pagounis E, Lindroos VK (1998) Mater Sci Eng A246:22110.1016/S0921-5093(97)00710-7 ↗
5. Kattamis TZ, Suganuma T (1990) Mater Sci Eng A128:24110.1016/0921-5093(90)90232-R ↗
6. Panchal JM, Vela T, Robisch T (1990) In: Masounave J, Hamel FG (eds) Fabrication of particulates reinforced metal composites. ASM International, Materials Park, p 245
7. Pagounis E, Talvitie M, Lindroos VK (1996) Compos Sci Technol 56:132910.1016/S0266-3538(96)00101-7 ↗
8. Quinn TFJ, Sullivan JL, Rowson DM (1984) Wear 94:17510.1016/0043-1648(84)90053-X ↗
9. Vardavoulias M (1994) Wear 173:10510.1016/0043-1648(94)90262-3 ↗
10. Stott FH, Wood GC (1978) Tribol Int 11:21110.1016/0301-679X(78)90178-0 ↗
11. Wilson JE, Stott FH, Wood GC (1980) Proc R Soc London A 369:55710.1098/rspa.1980.0016 ↗
12. Quinn TFJ (1971) Wear 18:41310.1016/0043-1648(71)90005-6 ↗