Softened zone formation and joint strength properties in dissimilar friction welds
Source abstract
Abstract
The mechanical properties of dissimilar MMC/AISI 304 stainless steel friction welds with and without silver interlayers were examined. The notch tensile strengths of MMC/AISI 304 stainless steel and MMC/Ag/AISI 304 stainless steel friction welds increased when high friction pressures were applied during the joining operation. The higher notch tensile strengths of dissimilar MMC/AISI and MMC/Ag/AISI 304 stainless steel friction welds resulted from the formation of narrow softened zones in MMC material immediately adjacent to the bondline. The influence of softened zone width and hardness (yield strength) on the notch tensile strengths of dissimilar welds was analysed using finite element modelling (FEM). FEM in combination with the assumption of a ductile failure criterion was used to calculate the notch tensile strengths of dissimilar joints. The key assumption in this work is that dissimilar weld failure wholly depended on the characteristics (mechanical properties and dimensions) of the softened zone formed in MMC material immediately adjacent to the bondline. The modelling results produced based on this assumption closely correspond with the actual notch tensile strengths of dissimilar MMC/Ag/AISI 304 stainless steel and MMC/Ag/AISI 304 stainless steel friction welds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. C. MALDONADO and T. H. NORTH, 2000, preprint.
2. S. ELLIOT and E. R. WALLACH, Met. Const. 13(3) (1981) 167.
3. Idem., ibid. 13(4) (1981) 221.10.1016/0030-3992(81)90075-X ↗
4. T. J. JESSOP, E. D. NICHOLAS and W. O. DINSDALE, in Proc. Conf. of Advances in Welding Processes, Harrogate, UK, May 1978, TWI, 23.
5. K. UENISHI, Y. ZHAI, T. H. NORTH and G. BENDZSAK, Weld. J. 79(7) (1999) 184s.
6. E. A. ALMOND, D. K. BROWN, G. J. DAVIES and A. M. COTTENDEN, Int. J. of Mech. Sci. 25(3) (1983) 175.10.1016/0020-7403(83)90091-7 ↗
7. G. A. HENSHALL, R. S. ROSEN, M. E. KASSNER and R. G. WHIRLEY, Weld. J. 69(9) (1990) 337s.
8. S. B. DUNKERTON, Report 201/1982, TWI, Abington Hall, Cambridge, 1982.
9. Idem., Report 229/1982, TWI, Abington Hall, Cambridge, 1983.
10. J. W. DINI, W. K. KELLEY, W. C. COWDEN and E. M. LOPEZ, Weld. J. 63(1) (1984) 26s.
11. H. HARTWIG and J. S. KOUPTSIDIS, in Proc. 7th Int. Vaccum Cong. and 3rd Conf. on Solid Surfaces, Vienna, Osterreichsche Sutdeingesellschaft fur Atomenergie, 1977, Vol. 1, p. 259.
12. J. W. HANCOCK and A. C. MACKENZIE, J. of Mech. and Phys. of Sol. 24 (1976) 147.10.1016/0022-5096(76)90024-7 ↗
13. E. M. MIELNIK, in “Metalworking Science and Engineering” (McGraw-Hill, New York, N.Y., 1991).
14. C. MALDONADO, Y. ZHAI and T. H. NORTH, Sci. and Tech. of Weld. and Join. 3(5) (1998) 213.10.1179/stw.1998.3.5.213 ↗
15. O. R. MYHR and O. GRONG, Acta Metall. et Mater. 39(11) (1991) 2703.10.1016/0956-7151(91)90086-G ↗
16. M. HVAL, C. THAULOW, J. H. LANGE, S. H. HOYDAL and Z. L. ZHANG, Weld. J. 77(5) (1998) 208s.
17. M. E. KASSNER, M. C. TOLLE, R. S. ROSEN, G. A. HENSHALL, G. A. and J. M. ELMER, “The Metal Science of Joining” (TMS, 1992).
18. D. TEIRLINCK, F. ZOK, J. D. EMBURY and M. F. ASHBY, Acta Metall. 36(5) (1988) 1213.10.1016/0001-6160(88)90274-X ↗
19. A. FUJI, T. H. NORTH, K. AMEYAMA and M. FUTAMATA, Mat. Sci. and Tech. 8(4) (1992) 219.10.1179/mst.1992.8.3.219 ↗
20. A. FUJI, T. H. NORTH, M. KIMURA and K. AMEYAMA, Mat. Sci. Res. Int. 1(3) (1995) 188.
21. A. FUJI, K. AMEYAMA, T. H. NORTH and M. KIMURA, ibid. 1(3) (1995) 193.
22. H. SUZUKI, N. UEHARA, A. NOZUE and T. OKUBO, in “Metallurgy and Technology of Practical Titanium Alloys,” edited by S. Fujishiro, D. Eylon and T. Kishi (TMS, 1994) p. 239.