Tape casting aqueous alumina suspensions containing a latex binder
Source abstract
Abstract
The tape casting of ceramic membrane substrates of ∼1 mm thickness has been studied using two grades of ammonium polymethylacrylate (PMA) as a dispersing agent, dibutylphthalate as a plasticizer and polyvinylacetate (PVAc) latex as a binder. The colloidal stability of the alumina particles in the precursor slip was characterized using zeta potential measurements and the rheological behaviour of the slips. After tape casting, the density, strength and flexibility of the green tapes were studied in terms of changes in the plasticizer concentration and pH of the slip. The results indicated that alumina particles could be stabilized at pH 6–10 at a PMA15 concentration of 10 mg g−1. The slips prepared with the polyelectroyte also displayed a strong shear thinning effect, which is important for tape casting. With the proper addition of plasticizer and adjustment of pH, it was found that a PVAc latex-based system can yield green alumina tapes with high green strength and flexibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Polymer Nanocomposites and Properties · Advanced Polymer Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R. E. MISTLER, Am. Ceram. Soc. Bull. 69(6) (1990) 1022.
2. E. M. ANDERSON, R. A. MARRA and R. E. MISTIER, ibid. 76(7) (1997) 45.
3. C. SIMON, R. BREDESEN, H. RAEDER, M. SEIERSTEN, A. JULBE, C. MONTELL, I. LAAZIZ, J. ETIENNE and L. COT, Key Engineering Materials 61/62 (1991) 425.10.4028/www.scientific.net/KEM.61-62.425 ↗
4. M. W. MURPHY, T. R. ARMSTRONG and P. A. SMITH, J. Amer. Ceram. Soc. 80(1) (1997) 165.10.1111/j.1151-2916.1997.tb02805.x ↗
5. S. SUMITA, W. E. RHINE and H. K. BOWEN, ibid. 74(9) (1991) 2189.10.1111/j.1151-2916.1991.tb08282.x ↗
6. R. MORENO, Am. Ceram. Soc. Bull. 71(11) (1992) 1647.
7. T. F. TADROS, L'actualitκ chimique 9 (1987) 270.
8. D. H. NAPPER, in “Polymeric Stabilization of Colloid Dispersions” (Academic Press, London, 1983) p. 10.
9. J. CESARANO III and I. A. AKSAY, J. Amer. Ceram. Soc. 74(4) 1988) 250.10.1111/j.1151-2916.1988.tb05855.x ↗
10. Idem., ibid. 71(12) (1988) 1062.10.1111/j.1151-2916.1988.tb05792.x ↗
11. R. MORENO, Am. Ceram. Soc. Bull. 71(10) (1992) 1521.
12. M. DESCAMPS, G. RINGUSET, D. LEGER and B. HIERRY, J. Euro. Ceram. Soc. 15 (1995) 0357.10.1016/0955-2219(95)90360-U ↗
13. T. CHARTIER and A. BRUNEAU, ibid. 12 (1993) 243.10.1016/0955-2219(93)90098-C ↗
14. N. KIRATZIS and P. F. LUCKHAM, ibid. 8 (1998)783.10.1016/S0955-2219(97)00117-9 ↗
15. C. PAGNOUX, T. CHARTIER, M. F. GRANJA, F. DOREAU and J. M. FERREIRA, ibid. 18 (1998) 241.10.1016/S0955-2219(97)00115-5 ↗
16. N. USHIFUSA and M. J. CIMA, ibid. 74(10) (1991) 2443.10.1111/j.1151-2916.1991.tb06782.x ↗
17. K. NAGATA, J. Ceram. Soc. Japan 101(8) (1993) 845.10.2109/jcersj.101.845 ↗
18. N. R. GURAK, P. L. JOSTY and R. J. THOMPSON, Am. Ceram. Soc. Bull. 66(10) (1987) 1495.
19. A. FOISSY, A. E. ATTAR and J. M. LAMARCHE, J. Colloid Interface Sci. 96(1) (1983) 275.10.1016/0021-9797(83)90029-2 ↗
20. L. GUO, Y. ZHANG, N. UCHIDA and K. UEMATSU, J. Euro. Ceram. Soc. 17(2–3) (1997) 345.10.1016/S0955-2219(96)00179-3 ↗
21. K. F. TJIPANGANDJARA, Y-B. HUANG, P. SOMASUNDARAN and N. J. TURRO, Colloids and Surfaces 44 (1990) 229.10.1016/0166-6622(90)80198-D ↗
22. A. DINSDALE and F. MOORE, in “Viscosity and its Measurement” (Chapman and Hall Ltd, London, 1962) p. 45.
23. B. SAKELLARIOU, H. HASSAN and R. C. ROWE, European Polymer Journal 29(7) (1993) 937.10.1016/0014-3057(93)90289-R ↗