journal article·2001-07

Mechanism of surface modification of a porous-coated Ti-6Al-4V implant fabricated by electrical resistance sintering

W. H. Lee, S. J. Kim, W. J. Lee, C. S. Byun, D. K. Kim, J. Y. Kim, C. Y. Hyun, J. G. Lee, J. W. Park

Journal of Materials Science· Volume 36· Issue 14
Publisher page

Abstract

A porous-coated Ti-6Al-4V implant was fabricated by electrical resistance sintering, using 480 μF capacitance and 1.5 kJ input energy. X-ray photoelectron spectroscopy (XPS) was used to study the surface characteristics of the implant material before and after sintering. There were substantial differences in the content of O and N between as-received atomized Ti-6Al-4V powders and the sintered prototype implant, which indicates that electrical resistance sintering alters the surface composition of Ti-6Al-4V. Whereas the surface of atomized Ti-6Al-4V powders was primarily TiO2, the surface of the implant consisted of a complex of titanium oxides as well as small amounts of titanium carbide and nitride. It is proposed that the electrical resistance sintering process consists of five stages: stage I – electronic breakdown of oxide film and heat accumulation at the metal-oxide interface; stage II – physical breakdown of oxide film; stage III – neck formation and neck growth; stage IV – oxidation, nitriding, and carburizing; and stage V – heat dissipation. The fourth stage, during which the alloy repassivates, is responsible for the altered surface composition of the implant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electron and X-Ray Spectroscopy Techniques · Bone Tissue Engineering Materials · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. K. Okazaki, in “Report to National Science Foundation Novel Research Initiative Grant” (MSN-8610824, May 25, 1987).
2. K. Okazaki, W. H. Lee, D. K. Kim and R. A. Kopczyk, J. Biomed. Mater. Res. 25 (1991) 1417.10.1002/jbm.820251202 ↗
3. K. Asaoka, N. Kuwayama, O. Okuno and I. Miura, ibid. 19 (1985) 699.10.1002/jbm.820190609 ↗
4. S. Yue, R. M. Pillar and G. C. Weatherly, J. Biomed. Mater. Res. 18 (1984) 1043.10.1002/jbm.820180908 ↗
5. R. M. Pilliar, ibid. 21 (1987) 1.10.1002/j.1097-4636.1987.tb00003.x ↗
6. W. H. Lee and J. W. Park, J. Mater. Sci. Lett. 19(11) (2000) 925.10.1023/A:1006795500566 ↗
7. B. Kasemo, J. Prosth. Dent. 49 (1983) 832.10.1016/0022-3913(83)90359-1 ↗
8. B. Kasemo, J. Lausmaa, P. I. Branermark, G. A. Zarb and T. Albrektsson, in “Tissue-Integrated Prosthseses” (Quintessence Books, Chicago, 1985) p. 137.
9. K. Gomi and J. E. Davies, J. Biomed. Mater. Res. 27 (1993) 429.10.1002/jbm.820270403 ↗
10. J. Y. Martin, Z. Schwartz, T. W. Hummert, D. M. Schraub, J. Simpson, J. Laukford, D. D. Dean, D. L. Cochran and B. D. Boyan, ibid. 29 (1995) 389.10.1002/jbm.820290314 ↗
11. B. Groessner-Schreiber and R. S. Tuan, J. Cell Sci. 101 (1992) 209.10.1242/jcs.101.1.209 ↗
12. T. Morita, H. Takahashi, M. Shimizu and K. Kawasaki, Fatigue Fract. Eng. Mater. Struct. 20 (1997) 85.10.1111/j.1460-2695.1997.tb00404.x ↗
13. J. E. Lemons, Surf. Coatings Techn. 103/104 (1998) 135.10.1016/S0257-8972(98)00366-1 ↗
14. M. Morra and C. Cassinelli, Surf. Intf. Analy. 25 (1997) 983.10.1002/(SICI)1096-9918(199712)25:13<983::AID-SIA345>3.0.CO;2-X ↗
15. A. Loinaz, M. Rinner, F. Alonso, J. Onate and W. Ensinger, Surf. Coatings Techn. 103/104 (1998) 262.10.1016/S0257-8972(98)00411-3 ↗
16. H. Plenk, J. Biomed. Mater. Res. 43 (1998) 350.10.1002/(SICI)1097-4636(199824)43:4<350::AID-JBM2>3.0.CO;2-S ↗
17. C. Howlett, H. Zreiqat, Y. Wu, D. Mcfall and D. Mckenzie, ibid. 45 (1999) 345.10.1002/(SICI)1097-4636(19990615)45:4<345::AID-JBM9>3.0.CO;2-J ↗
18. T. Czerwiec, H. Michel and E. Bergmann, Surf. And Coatings Techn. 108/109 (1998) 182.10.1016/S0257-8972(98)00555-6 ↗
19. A. Sarkissian, A. Bourque-Viens, R. Paynter, R. Saint-Jacques and B. Stansfield, ibid. 98 (1998) 1336.10.1016/S0257-8972(97)00399-X ↗
20. W. H. Lee, J. W. Park, D. A. Puleo and J. Y. Kim, J. Mater. Sci. 35(3) (2000) 593.10.1023/A:1004768125476 ↗
21. W. H. Lee and D. A. Puleo, J. Mater. Sci. Lett. 18 (1999) 817.10.1023/A:1006653503849 ↗
22. T. Hanawa and M. Ota, Appl. Surf. Sci. 55 (1992) 269.10.1016/0169-4332(92)90178-Z ↗
23. Idem., Biomaterials 12 (1991) 767.10.1016/0142-9612(91)90028-9 ↗
24. J. Moulder, W. Stickle, P. Sobal and K. Bomber, “Handbook of X-ray Photoelectron Spectroscopy” (Perkin Elmer Corp., Eden Prairie, 1992) p. 213.
25. M. Ask, J. Lausmaa and B. Kasemo, Appl. Surf. Sci. 35 (1989) 283.10.1016/0169-4332(89)90013-5 ↗
26. N. R. Armstrong and R. K. Quinn, Surf. Sci. 67 (1977) 451.10.1016/0039-6028(77)90007-3 ↗
27. W. Gopel, J. A. Anderson, D. Frankel, M. Jaehnig, K. Phillips, J. A. Shaffer and G. Rocker, ibid. 139 (1984) 333.10.1016/0039-6028(84)90054-2 ↗
28. C. N. Sayers and N. R. Armstrong, ibid. 77 (1978) 301.10.1016/0039-6028(78)90008-0 ↗
29. T. J. Davies and S. T. S. Al-Hassani, “Advances in Materials Technology in America, Vol. 2, Materials Processing and Performance,” edited by I. LeMay (America Society for Mechanical Engineers, New York, 1980) p. 147.
30. D. K. Kim, H.-R. Pak and K. Okazaki, Mat. Sci. Eng. A104 (1988) 191.10.1016/0025-5416(88)90421-1 ↗
31. J. F. Drummond, J. T. Dominici, P. J. Sammon, K. Okazaki, R. Geissler, M. I. Lifland, S. A. Anderson and W. Renshaw, J. Oral Implantol. 21 (1995) 295.