journal article·2004-12

Prediction of macrosegregation during the solidification involving a peritectic transformation for multicomponent steels

L. Thuinet, H. Combeau

Journal of Materials Science· Volume 39· Issue 24
Publisher page

Abstract

Micro-macro segregation models are based on the multi-scale approach of the segregation, i.e., on the coupling of a macrosegregation model, which describes transport phenomena at the ingot scale, with a microsegregation model, which describes solidification at the scale of the primary or secondary dendrite arm spacing. The goal of this work is to illustrate the influence of the microsegregation phenomena on the macrosegregation. A microsegregation model for multicomponent steel alloys has been developed which takes into account solutal diffusion in solid and liquid phases, a correct description of the multicomponent phase diagram, and the variation of the local average solute concentration (open system). The peritectic transformation has been tackled and specific attention has been drawn on the accurate determination of the δ/γ and γ/liquid interface movements during solidification. Examples of micro-macro calculations obtained with this microsegregation model on ingot cases are presented and original results which illustrate specific effects of the peritectic transformation on macrosegregation are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. C. Beckermann, Intern. Mater. Rev. 47(5) (2002) 243.10.1179/095066002225006557 ↗
2. H. Combeau, J.-M. Drezet, A. Mo and M. Rappaz, Metall. Mater. Trans. 27A (1996) 1314.
3. C. Y. Wang and C. Beckermann, Mater. Sci. Eng. 171 (1993) 199.10.1016/0921-5093(93)90407-6 ↗
4. M. C. Schneider and C. Beckermann, Metall. Mater. Trans. A 26A (1995) 2373.10.1007/BF02671251 ↗
5. J. Miettinen, Metall. Trans. A 23A (1992) 1155.10.1007/BF02665047 ↗
6. M. C. Schneider, J. P. Gu, C. Beckermann, W. J. Boettinger and U. R. Kattner, Metall. Mater. Trans. A 28A (1997) 1517.10.1007/s11661-997-0214-3 ↗
7. J. P. Gu and C. Beckermann, ibid. 30A (1999) 1357.
8. Y. Ueshima, S. Mizoguchi, T. Matsumiya and H. Kajioka, Metall. Trans. B 17B (1986) 845.10.1007/BF02657148 ↗
9. H. W. Kerr and W. Kurz, Intern. Mater. Rev. 41(4) (1996) 129.10.1179/imr.1996.41.4.129 ↗
10. G. Blanc and R. Tricot, Mem. Sci. Rev. Met. 68 (1971) 735.
11. A. A. Howe, Micro-Segregation in Multicomponent Steels Involving the Peritectic Reaction, Ph.D. thesis, Sheffield University, 1993.
12. D. H. ST. John and L. M. Hogan, Acta Metall. 25 (1977) 77.10.1016/0001-6160(77)90248-6 ↗
13. H. Fredriksson and J. Stjerndahl, Metall. Trans. 8A (1977) 1107.10.1007/BF02667396 ↗
14. H. Fredriksson, Metal Sci. (1976) 77.10.1179/msc.1976.10.3.77 ↗
15. H. Fredriksson and J. Sternjdahl, ibid. 16 (1982) 575.10.1016/0036-9748(82)90273-3 ↗
16. M. C. Schneider and C. Beckermann, ISIJ Intern. 35(6) (1995) 665.10.2355/isijinternational.35.665 ↗
17. L. Thuinet, G. Lesoult and H. Combeau, in Liq. Met. Proc. & Casting Conf. 2003, Nancy, Sept. 21–24, edited by Peter D. Lee, Alec Mitchell, Jean-Pierre Bellot and Alain Jardy, 2003, p. 163.
18. N. Ahmad, H. Combeau, J. L. Desbiolles, T. Jalanti, G. Lesoult, J. Rappaz, M. Rappaz and C. Stomp, Metall. Mater. Trans. A 29A (1998) 617.10.1007/s11661-998-0143-9 ↗
19. X. Tong and C. Beckermann, J. Cryst. Growth 187 (1998) 289.10.1016/S0022-0248(97)00878-6 ↗
20. H. D. Brody and M. C. Flemings, Trans. AIME 236 (1966) 615.
21. T. W. Clyne and W. Kurz, Metall. Trans., 12A (1981) 965.10.1007/BF02643477 ↗
22. X. DorÉ, H. Combeau and M. Rappaz, Acta Materiala 48 (2000) 3951.10.1016/S1359-6454(00)00177-4 ↗
23. Guide to the Solidification of Steels, Stockholm, Jernkontoret,1977.