journal article·2004-09

Thermal stability study on two aluminum alloys processed with equal channel angular pressing

M. Cabibbo, E. Evangelista, V. Latini

Journal of Materials Science· Volume 39· Issue 18
Publisher page

Abstract

Equal channel angular pressing was used to produce sub-micrometer size grain structures in two aluminum alloys (commercially pure 1200 and Al-Mn-Si 3103). ECAP was conducted at room temperature following the process via “route C,” which involves a 180° angular rotation between passes and strongly affects material microstructure by reversing the shear strain every second pass. This unique characteristic of route C induced limited build-up of new high-angle boundaries, at least for the first three passes. The equal channel angular pressing was extended to six passes for both alloys; three passes by route C throughout the die were sufficient to produce a very fine-structured material for both alloys. High-resolution electron back-scattered diffraction pattern analysis was carried out to measure boundary misorientation within the deformed structures. Measurements of subgrain and grain spacing revealed a more effective microstructure refining effect in the 3103 than the 1200 alloy. Thermal stability of the severely deformed materials was studied at temperatures of 130, 240, 330°C, corresponding to 0.2, 0.35, 0.5 of the melting temperature. The results showed considerable grain growth in both materials solely at temperatures from and above half of the melting one.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. R. Z. VALIEV, R. K. ISLAMGALIEV and I. V. ALEXANDROV, Prog. Mater. Sci. 45 (2000) 103.10.1016/S0079-6425(99)00007-9 ↗
2. V. M. SEGAL, V. I. REXENIKOV, A. E. DOBYSHEVSKIJ and V. I. KOPYLOV, Metally 1 (1982) 115 (translation from: Russian Metallurgy 1 (1981) 99).
3. A. GHOLINA, P. B. PRANGNELL and M. V. MARKUSHEV, Acta Mater. 48 (2000) 1115.10.1016/S1359-6454(99)00388-2 ↗
4. J. R. BOWEN, O. V. MISHIN, P. B. PRANGNELL and D. JUUL JENSEN, Scripta Mater. 47 (2002) 289.10.1016/S1359-6462(02)00109-4 ↗
5. A. GHOLINA, P. BATE and P. B. PRANGNELL, Acta Mater. 50 (2002) 2121.10.1016/S1359-6454(02)00055-1 ↗
6. A. GHOLINA, J. R. BOWEN, P. B. PRANGNELL and F. J. HUMPHREYS, in Proceedings of the 6th Int. Conf. on Al-Alloys ICAA-6, edited by T. Sato, S. Kumai, T. Kobayashi and Y.T. Murakami (The Japan Institute of Light Metals, Tokyo, 1998) Vol. 1, p. 577.
7. P. B. BERTON, N. K. TSENEV, R. Z. VALIEV, M. FURUKAWA Z. HORITA, M. NEMOTO and T. G. LANGDON, Metall. Mater. Trans.A29 (1998) 2237.
8. B. BAY and N. HANSEN, in Proceedings of the Risø Int. Conf. on Annealing Process: Recovery, Recrystallization and Grain Growth 1986, edited by N. Hansen, D. Juul Jensen, T. Leffers and B. Ralph, p. 215.
9. Y. IWAHASHI, Z. HORITA, M. NEMOTO and T. G. LANGDON, Acta Mater. 46 (1998) 3317.10.1016/S1359-6454(97)00494-1 ↗
10. J. Y. CHANG, J. S. YOON and G. H. KIM, Scripta Mater. 45 (2001) 347.10.1016/S1359-6462(01)01040-5 ↗
11. G. PALOMBO, U. ERB and K. T. AUST, ibid. 24 (1990) 2347.10.1016/0956-716X(90)90091-T ↗
12. C. SURYANARAYANA, D. MUKHOPADHYAY, S. N. PANTANKAR and F. H. FROES, J. Mater. Res. 7 (1992) 2114.10.1557/JMR.1992.2114 ↗
13. Z. HORITA, T. FUJINAMI, M. NEMOTO and T. G. LANGDON, J. Mater. Proc. Techn. 117 (2001) 288.10.1016/S0924-0136(01)00783-X ↗
14. O. A. KAIBISHEV, ibid. 117 (2001) 300.10.1016/S0924-0136(01)00784-1 ↗
15. Z. HORITA, T. FUJINAMI, M. NEMOTO and T. G. LANGDON, Metall. Mater. Trans. A31 (2000) 691.10.1007/s11661-000-0011-8 ↗
16. M. FURUKAWA, Y. IWAHASHI, Z. HORITA, M. NEMOTO and T. G. LANGDON, Mater. Sci. Eng. A257 (1998) 328.10.1016/S0921-5093(98)00750-3 ↗
17. K. NAKASHIMA, Z. HORITA, M. NEMOTO and T. G. LANGDON, Acta Mater. 46 (1998) 1589.10.1016/S1359-6454(97)00355-8 ↗
18. Y. IWAHASHI, J. WANG, Z. HORITA, M. NEMOTO and T. G. LANGDON, Scripta Mater. 35 (1996) 143.10.1016/1359-6462(96)00107-8 ↗
19. P. L. SUN, P. W. KAO and C. P. CHANG, Mater. Sci. Eng. A283 (2000) 82.10.1016/S0921-5093(99)00800-X ↗
20. A. SHAN, I. G. MOON and J. W. PARK, J. Mater. Proc. Techn. 122 (2002) 255.10.1016/S0924-0136(02)00057-2 ↗
21. E. NES, A. L. DONS and N. RYUM, in Proceedings of IC-SMA 6, 1982, edited by R. C. Gifkins (Pergamon Press, 1982) p. 425.10.1016/B978-1-4832-8423-1.50071-7 ↗
22. S. D. TERHUNE, D. L. SWISHER, K. OH-ISHI, Z. HORITA, T. G. LANGDON and T. R. McNELLEY, Metall. Mater. Trans. A33A (2002) 2173.10.1007/s11661-002-0049-x ↗
23. P. J. HURLEY, P. S. BATE and F. J. HUMPHREYS, Acta Mater. 51 (2003) 4737.10.1016/S1359-6454(03)00277-5 ↗
24. R. CROOKS S. J. HALES and T. R. McNELLEY, in Pro-ceedings of Int. Conf. on Superplasticity and Superplastic Forming 1998, edited by C. H. Hamilton and N. E. Paton (The Minerals, Metals and Materials Society) p. 389.
25. M. FURUKAWA, Z. HORITA, M. NEMOTO, R. Z. VALIEV and T. G. LANGDON,Acta Mater. 44 (1996) 4619.10.1016/1359-6454(96)00105-X ↗