Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and Foaming
Source abstract
Abstract
A novel processing route for fabricating cellular and microcellular ceramics with controllable open-cell content has been developed. The proposed strategy for producing cellular and microcellular ceramics involves: (i) development of desired foamable polysiloxane–polyolefin blends by using a compounder element, in which the polyolefin phase is uniformly dispersed in the polysiloxane matrix, (ii) foaming the obtained blends by implementing the thermodynamic instability principle to produce a cellular or microcellular ceramic precursor structure, and (iii) completing the organic–inorganic transition without sacrificing the obtained cellular or microcellular structure and inducing open-channels in the cell walls by burning out the sacrificial dispersed polyolefin phase at elevated temperatures. By controlling the viscosity of the dispersed polyolefin phase, the polyolefin concentration and compounding parameters, the polysiloxane–polyolefin blend morphology can be varied. Furthermore, plus a deliberate control of foaming and pyrolyzing parameters, the foam morphology and open-cell content of produced cellular and microcellular ceramics can be adjusted. In this paper, the technique to get a desired cellular and microcellular ceramic precursor structure is demonstrated. The deliberate pyrolysis technique to complete the organic–inorganic transition and the mechanical properties of the obtained microcellular ceramics will be discussed in another paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Cellular and Composite Structures · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Saggio-Woyansky J, Scott CE, Minnear WP (1992) Am Ceram Soc Bull 71:1674
2. Nettleship I (1996) Key Eng Mater 122–124:30510.4028/www.scientific.net/KEM.122-124.305 ↗
3. Lange FF, Miller KT (1987) Adv Ceram Mater 2:82710.1111/j.1551-2916.1987.tb00156.x ↗
4. Zhang GJ, Yang JF, Ohji T (2001) ibid 84:1395
5. Nangrejo MR, Bao X, Edirisinghe MJ (2000) J Mat Sci Lett 19:78710.1023/A:1006725023801 ↗
6. Colombo P, Modesti M (1999) J Am Ceram Soc 82:57310.1111/j.1151-2916.1999.tb01803.x ↗
7. Sepulveda P, Binner JGP (1999) J Eur Ceram Soc 19:205910.1016/S0955-2219(99)00024-2 ↗
8. Sepulveda P (1997) Am Ceram Soc Bull 76:61
9. Peng HX, Fan Z, Evans JRG, Busfield JJC (2000) J Eur Ceram Soc 20:80710.1016/S0955-2219(99)00229-0 ↗
10. Wu W, Fujiu T, Messing GL (1990) J Non-Cryst Solids 121:40710.1016/0022-3093(90)90167-K ↗
11. Fujiu T, Messing GL, Huebner W (1990) J Am Ceram Soc 73:8510.1111/j.1151-2916.1990.tb05095.x ↗
12. Sherman AJ, Tuffias RH, Kaplan RB (1990) Am Ceram Soc Bull 70:1025
13. Green DJ (1985) J Am Ceram Soc 68:40310.1111/j.1151-2916.1985.tb10153.x ↗
14. Aoki Y, Mcenaney B (1995) Br Ceram Trans 94:133
15. Colombo P, Bernardo E (2003) Comp Sci Tech 63:235310.1016/S0266-3538(03)00268-9 ↗
16. Kim Y-W, Kim SH, Kim HD, Park CB (2004) J Mater Sci 39:564710.1023/B:JMSC.0000040071.55240.85 ↗
17. Kim Y-W, Park CB, (2003) Comp Sci Tech 63:237110.1016/S0266-3538(03)00270-7 ↗
18. Kim Y-W, Kim SH, Xu X, Choi CH, Park CB, Kim HD (2002) J Mater Sci Lett 21:166710.1023/A:1020820608722 ↗
19. Kim Y-W, Kim SH, Wang C, Park CB (2003) J Am Ceram Soc 86:223110.1111/j.1151-2916.2003.tb03641.x ↗
20. Wang C, Wang J, Park CB, Kim Y-W (2004) J Mater Sci Lett 39:491310.1023/B:JMSC.0000035335.92101.7c ↗
21. Naguib HE, Park CB, Panzer U, Reichelt N (2002) Polym Eng Sci 42:148110.1002/pen.11045 ↗
22. Naguib HE, Park CB, Reichelt N (2004) J Appl Polym Sci 91:266110.1002/app.13448 ↗
23. FAVIS BD (2000) In: Paul DR, Bucknall CB (eds) Polymer blends. John Wiley & Sons, New York, p 501, Formulation