Effect of through-thickness compression on the microstructure of carbon fiber polymer-matrix composites, as studied by electrical resistance measurement
Source abstract
Abstract
Compression in the through-thickness direction (as in fastening) resulted in reversible and irreversible changes in the microstructure of continuous carbon fiber epoxy-matrix composites, as shown by electrical resistance measurement during dynamic compression. The extent of fiber-fiber contact across the interlaminar interface was increased, with partial irreversibility even at a low stress amplitude of 1 MPa. Within a lamina, fiber squeezing in the through-thickness direction and fiber spreading in the transverse direction occurred upon fastening compression, with partial irreversibility at a stress amplitude of 100 MPa or above. For a single laminae beyond 400 MPa, the lessening of fiber squeezing in the through-thickness direction during unloading dominated over the fiber spreading in the transverse direction during loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Advanced Energy Technologies and Civil Engineering Innovations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Eighth Update on NTSB Investigation into Crash of American Airlines Flight 587, NTSB Advisory, National Transportation Safety Board, Washington, DC 20594, June 4, 2002. http://www.ntsb.gov/pressrel/2002/020604.htm.
2. X. WANG and D. D. L. CHUNG, Smart Mater. Struct. 5 (1996) 796.10.1088/0964-1726/5/6/009 ↗
3. Idem., ibid. 6 (1997) 504.10.1088/0964-1726/6/4/017 ↗
4. Idem., Compos. Part B-Eng. 29B(1) (1998) 63.10.1016/S1359-8368(97)00014-0 ↗
5. X. WANG, X. FU and D. D. L. CHUNG, J. Mater. Res. 13(11) (1998) 3081.10.1557/JMR.1998.0420 ↗
6. X. WANG and D. D. L. CHUNG, ibid. 14(11) (1999) 4224.10.1557/JMR.1999.0572 ↗
7. S. WANG and D. D .L. CHUNG, Polym. Comp. 21(1) (2000) 13.10.1002/pc.10160 ↗
8. K. SHULTE and CH. BARON, Comp. Sci. Technol. 36 (1989) 63.10.1016/0266-3538(89)90016-X ↗
9. M. KUPKE, K. SHULTE and R. SCHULER, ibid. 61 (2001) 837.10.1016/S0266-3538(00)00180-9 ↗
10. A. TODOROKI, ibid. 61 (2001) 1871.10.1016/S0266-3538(01)00088-4 ↗
11. J. C. ABRY, Y. K. CHOI, A. CHATEAUMINOIS, B. DALLOZ, G. GIRAUD and M. SALVIA, ibid. 61(6) (2001) 855.10.1016/S0266-3538(00)00181-0 ↗
12. Z. XIA, T. OKABE, J. B. PARK, W. A. CURTIN and N. TAKEDA, ibid. 63(10) (2003) 1411.10.1016/S0266-3538(03)00083-6 ↗
13. N. ANGELIDIS, C. Y. WEI and P. E. IRVING, Compos. Part A-Appl. S. 35(10) (2004) 1135.10.1016/j.compositesa.2004.03.020 ↗
14. X. WANG, S. WANG and D. D. L. CHUNG, J. Mater. Sci. 34(11) (1999) 2703.10.1023/A:1004629505992 ↗
15. S. WANG and D. D. L. CHUNG, ibid. 35(1) (2000) 91.10.1023/A:1004744600284 ↗
16. X. WANG and D. D. L. CHUNG, Compos. Interf. 5(3) (1998) 191.10.1163/156855498X00144 ↗
17. I. WEBER and P. SCHWARTZ, Compos. Sci. Technol. 61(6) (2001) 849.10.1016/S0266-3538(01)00028-8 ↗
18. J. C. ABRY, S. BOCHARD, A. CHATEAUMINOIS, M. SALVIA and G. GIRAUD, ibid. 59(6) (1999) 925.10.1016/S0266-3538(98)00132-8 ↗
19. N. ANGELIDIS, N. KHEMIRI and P. E. IRVING, Smart Mater. Struct. 14 (2005) 147.10.1088/0964-1726/14/1/014 ↗
20. O. CEYSSON, M. SALVIA and L. VINCENT, Scripta Mater. 34(8) (1996) 1273.10.1016/1359-6462(95)00638-9 ↗
21. Y.-W. CHU and Y.-J. YUM, Proceedings – KORUS 2001, The 5th Korea-Russia International Symposium on Science and Technology, Section 5—Mechanics and Automotive Engineering (2001) p. 240.
22. P. E. IRVING and C. THIAGARAJAN, Smart Mater. Struct. 7 (1998) 456.10.1088/0964-1726/7/4/004 ↗
23. A. S. KADDOUR, A. R. AL-SALEHI, S. T. S. AL-HASSANI and M. J. HINTON, Compos. Sci. Technol. 51(3) (1994) 377.10.1016/0266-3538(94)90107-4 ↗
24. L. C. MASSON and P. E. IRVING, Proceedings of SPIE, 5th European Conference on Smart Structures and Materials 4073 (2000) 182.10.1117/12.396399 ↗
25. N. MUTO, H. YANAGIDA, T. NAKATSUJI, M. SUGITA, Y. OHTSUKA and Y. ARAI, Smart Mater. Struct. 1 (1992) 324.10.1088/0964-1726/1/4/007 ↗
26. R. PRABHAKARAN, Exp. Techniques 14(1) (1990) 16.10.1111/j.1747-1567.1990.tb01059.x ↗
27. A. TODOROKI, Y. TANAKA and Y. SHIMAMURA, Compos. Sci. Technol. 64(5) (2004) 749.10.1016/j.compscitech.2003.08.004 ↗
28. S. WANG and D. D. L. CHUNG, Comp. Interf. 6(6) (1999) 497.10.1163/156855499X00170 ↗
29. Idem., ibid. 6(6) (1999) 507.10.1163/156855499X00189 ↗
30. Idem., Polym. Polym. Comp. 9(2) (2001) 135.10.1177/096739110100900205 ↗