journal article·2009-07

ZrO2 foams for porous radiant burners

Sergio Yesid Gómez, J. A. Escobar, O. A. Alvarez, C. R. Rambo, A. P. Novaes de Oliveira, D. Hotza

Journal of Materials Science· Volume 44· Issue 13
Publisher page

Abstract

In this work, Y2O3-stabilized ZrO2 (YSZ) foams with low relative density were developed through the replication method, for application as porous radiant burners. The ceramic foams were produced by impregnation of open-cell polyurethane foams with aqueous suspensions and different fractions of raw materials: ZrO2–8% Y2O3 (8YSZ) powder, and additives. The materials were milled for 10–40 min. The impregnated foams were dried and submitted to a heat treatment for polyurethane elimination at 1000 °C for 1 h, with subsequent sintering of the remaining ceramic structure at 1600 °C for 2 h, which resulted in YSZ foams with low relative density (0.07). The structural analysis revealed a cellular structure with an average mechanical strength of 95.6 kPa. The radiation efficiency (>19%) was obtained by tests with different air/fuel ratio. The ceramic matrixes exhibited high performance and structural integrity at high operation temperatures (1400 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Jugjai S, Rungsimuntuchart N (2002) Exp Therm Fluid Sci 26:58110.1016/S0894-1777(02)00164-4 ↗
2. Scheffler M, Colombo P (2005) Cellular ceramics structure: manufacturing properties and applications. Wiley-VCH, Weinheim10.1002/3527606696 ↗
3. Bone W (1913) J Franklin Inst 2:101
4. Lucke C (1913) J Ind Eng Chem 5:80110.1021/ie50058a003 ↗
5. Trimis D, Wawrzinek K, Hatzfeld O, Lucka K, Rutsche A, Haase F, Krüger K, Küchen C (2001) In: Proceedings of the 6th international conference on technologies and combustion for a clear environment, Porto, p 717
6. Hayashi TC, Malico I, Pereira JCF (2004) Comput Struct 82:154310.1016/j.compstruc.2004.03.050 ↗
7. Mößbauer S, Pickenäcker O, Pickernäcker K, Trimis D (1999) In: Proceedings of the 5th international conference on technologies and combustion for a clean environment, Lisbon, p 519
8. Schwartzwalder K, Somers AV (1963) US Patent 3 090 094, May
9. Sousa E, Rambo CR, Hotza DD, Oliveira APN, Fey T, Greil P (2007) Mater Sci Eng A. doi: https://doi.org/10.1016/j.msea.2007.05.09810.1016/j.msea.2007.05.098 ↗
10. Pereira F (2002) Medição de Características Térmicas e Estudo do Mecanismo de Estabilização de Chama em Queimadores Porosos Radiantes. Thesis (Master in Mechanical Engineering) UFSC, Brazil, 102 p
11. Gibson LJ, Asbhy MF (1997) Cellular solids: structure and properties. Cambridge University Press, London10.1017/CBO9781139878326 ↗
12. Xinwen Z, Dongliang J, Shouhong T (2002) Mater Res Bull 37:54110.1016/S0025-5408(02)00674-8 ↗
13. Botella M (2005) Reología de Suspensiones Cerámicas. Consejo Superior de Investigaciones Científicas (CSIC), Madrid
14. Vedula VR, Green DJ, Hellman JR (1999) J Am Ceram Soc 82(3):64910.1111/j.1151-2916.1999.tb01813.x ↗
15. Elverum PJ, Ellzey JL, Kovar D (2005) J Mater Sci 40:155. doi: https://doi.org/10.1007/s10853-005-5701-610.1007/s10853-005-5701-6 ↗
16. Khannan R, Goel R, Ellzey JL (1994) Combust Sci Technol 99:13310.1080/00102209408935429 ↗
17. Pereira FM, Catapan RC, Oliveira AAM (2005) Development of a radiant porous burner with a combined thermal and fluidynamic mechanism of flame stabilization. In: 18th international congress of mechanical engineering, Ouro Preto, Brazil, 2005
18. Barra AJ, Ellzey JL (2004) Combust Flame 137:23010.1016/j.combustflame.2004.02.007 ↗
19. Orenstein RM, Green DJ (1992) J Am Ceram Soc 75(7):189910.1111/j.1151-2916.1992.tb07214.x ↗
20. Brezny R, Green DJ (1989) J Am Ceram Soc 72(7):114510.1111/j.1151-2916.1989.tb09698.x ↗