Thermal stability of SiO2-coated SiC fiber (Hi-Nicalon) under argon atmosphere
Source abstract
Abstract
Thermal stability of low-oxygen SiC fiber (Hi-Nicalon) coated with SiO2 film was investigated. The SiO2 film of same thickness but different crystal structure was formed by heating low-oxygen SiC fiber (Hi-Nicalon) under different oxidation conditions. The oxidation treatment and the subsequent exposure at 1773 K in argon caused very little loss of strength for unoxidized core. For as-oxidized fiber with SiO2 film which containedimperfections, further loss of strength was caused after exposure in argon. There was little degradation of core strength on being exposed repeatedly at rapid heating and cooling rate in argon. The fiber oxidized at 1773 K kept high level of strength even after exposure at 1823 K. This is because the change in crystal structure of SiO2 film before and after exposure in argon, which was the controlling factor in the degradation of strength, was diminished with increasing oxidation temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. M. Takeda, Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura, Ceram. Eng. Sci. Proc. 12 (1991) 1007.10.1002/9780470313831.ch7 ↗
2. Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura Idem., ibid. 13 (1991) 209.10.1002/9780470313954.ch23 ↗
3. G. Chollon, R. Pailler, R. Naslain, F. Laanani, M. Onthioux and P. Olry, J. Mater. Sci. 32 (1997) 327.10.1023/A:1018541030308 ↗
4. G. Chollon, R. Pailler, R. Naslain and P. Olry, ibid. 32 (1997) 1133.10.1023/A:1018515430675 ↗
5. T. Shimoo, H. Chen, K. Kakimoto and K. Okamura, J. Ceram. Soc. Japan 101 (1993) 295.10.2109/jcersj.101.295 ↗
6. T. Shimoo, H. Chen and K. Okamura, Nippon Kinzokugakkai-shi 57 (1993) 652.
7. T. Ishikawa, S. Kajii, K. Matsunaga, T. Hogami and Y. Kohtoku, J. Soc. Mat. Sci. Japan 45 (1996) 593.10.2472/jsms.45.593 ↗
8. T. Shimoo, F. Toyoda and K. Okamura, J. Am. Ceram. Soc. submitted.
9. F. Toyoda and K. Okamura Idem. J. Ceram. Soc. Japan 106 (1998) 447.10.2109/jcersj.106.1232_447 ↗
10. Idem. J. Mater. Sci. submitted.