Influence of whisker toughening and microstructure on the wear behavior of Si3N4- and Al2O3-matrix composites reinforced with SiC
Source abstract
Abstract
A comparative study of the influence of randomly-oriented SiC whiskers on the abrasive wear behavior of several commercially-produced Si3N4- and Al2O3-based ceramics suggested that the residual stress states present within the materials can be important in predicting their wear resistance. The addition of SiC whiskers to the Si3N4 matrix created residual tensile stresses at the whisker-matrix interfaces which led to enhanced bulk fracture toughness, but which degraded the fracture toughness at the microstructural level, and thus the abrasive wear resistance, by promoting easier whisker debonding and removal by the abrasive particles. The addition of SiC whiskers to an alumina matrix, on the other hand, led to the creation of residual compressive stresses at whisker-matrix interfaces, producing a locally tougher interface that was more able to withstand the rigors of the abrasive wear environment. These results indicate that in brittle materials, improved bulk mechanical properties do not always translate directly to improved performance in a tribological environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. M. RÑhle, B. J. Dalgleish and A. G. Evans, Scripta Metall. 21 (1987) 681.10.1016/0036-9748(87)90384-X ↗
2. P. F. Becher, C.-H. Hseuh, P. Angelini and T. N. Tiegs, J. Am. Ceram. Soc. 71 (1988) 1050.10.1111/j.1151-2916.1988.tb05791.x ↗
3. P. G. Charalambides and A. G. Evans, ibid. 72 (1989) 746.10.1111/j.1151-2916.1989.tb06211.x ↗
4. G. H. Campbell, M. RÑhle, B. J. Dalgleish and A. G. Evans, ibid. 73 (1990) 521.10.1111/j.1151-2916.1990.tb06548.x ↗
5. M. Bengisu, O. T. Inal and O. Tosyali, Acta Metall. Mater. 39 (1991) 2509.10.1016/0956-7151(91)90066-A ↗
6. P. F. Becher, J. Am. Ceram. Soc. 74 (1991) 255.10.1111/j.1151-2916.1991.tb06872.x ↗
7. P. Šajgalik, J. Dusza and M. J. Hoffman, ibid. 78 (1995) 2619.10.1111/j.1151-2916.1995.tb08031.x ↗
8. J. A. Hawk and C. P. Doğan, in “Advanced Ceramics for Structural and Tribological Applications,” edited by H. M. Hawthorne and T. Troczynski (CIM, Montreal, Quebec, Canada, 1995) p. 139.
9. T. Yamamoto, M. Olsson and S. Hogmark, Wear 174 (1994) 21.10.1016/0043-1648(94)90082-5 ↗
10. C. S. Yust, J. M. Leitnaker and C. E. Devore, ibid. 122 (1988) 151.10.1016/0043-1648(88)90075-0 ↗
11. S. C. Farmer, C. Dellacorte and P. O. Book, J. Mater. Sci. 28 (1993) 1147.10.1007/BF01191945 ↗
12. H. Liu, M. E. Fine and H. S. Cheng, J. Am. Ceram. Soc. 74 (1991) 2224.10.1111/j.1151-2916.1991.tb08289.x ↗
13. D. Wang and Z. Mao, ibid. 78 (1995) 2705.10.1111/j.1151-2916.1995.tb08045.x ↗
14. S. W. Lee, S. M. Hsu and R. G. Munro, in “Tribology of Composite Materials,” edited by P. K. Rohatgi, P. J. Blau, and C. S. Yust (ASM, Metals Park, OH, 1990) p. 35.
15. M. Bohmer and E. A. Almond, Mat. Sci. Eng. A 105/106 (1988) 105.10.1016/0025-5416(88)90486-7 ↗
16. J. R. Gomes, M. I. Osendi, P. Miranzo, F. J. Oliveira and R. F. Silva, Wear 233-235 (1999) 222.10.1016/S0043-1648(99)00243-4 ↗
17. V. S. R. Murthy, K. Srikanth and C. B. Raju, ibid. 223 (1998) 79.10.1016/S0043-1648(98)00307-X ↗
18. M. A. Moore and F. S. King, ibid. 60 (1980) 123.10.1016/0043-1648(80)90253-7 ↗
19. A. G. Evans and D. B. Marshall, in “Fundamentals of Friction and Wear of Materials,” edited by D. A. Rigney (ASM, Metals Park, OH, 1980) p. 439.
20. T. A. Libsch, P. C. Becker and S. K. Rhee, Wear 111 (1986) 263.10.1016/0043-1648(86)90103-1 ↗
21. C. P. Doğan and J. A. Hawk, ibid. 181-183 (1995) 129.10.1016/0043-1648(94)07008-3 ↗
22. C. P. Doğan and J. A. Hawk, in “Advanced Ceramics for Structural and Tribological Applications,” edited by H. M. Hawthorne and T. Troczynski (CIM, Montreal, Quebec, Canada, 1995) p. 181.
23. S.-J. Cho, B. J. Hockey, B. R. Lawn and S. J. Bennsion, J. Am. Ceram. Soc. 72 (1989) 1249.10.1111/j.1151-2916.1989.tb09718.x ↗
24. S. M. Hsu, V. S. Nagarajan and H. Liu, in “Advanced Ceramics for Structural and tribological Applications,” edited by H. M. Hawthorne and T. Troczynski (CIM, Montreal, Quebec, Canada, 1995) p. 7.
25. G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, J. Am. Ceram. Soc. 64 (1981) 533.10.1111/j.1151-2916.1981.tb10320.x ↗
26. R. Blickensderfer and G. Laird, II, J. Test. Eval. 16 (1988) 516.10.1520/JTE11270J ↗
27. DIN 50 321, Verschleiss-Messgroessen (Beuth Verlag, Berlin, 1979).
28. “1992 Annual Book of ASTM Standards, Vol. 03.02: Wear and Erosion; Metal Corrosion” (ASTM, Philadelphia, PA, 1992) p. 248.
29. M. Wilkens and M. RÑhle, Phys. Status Solidi B 49 (1972) 749.10.1002/pssb.2220490239 ↗
30. I. H. Hutchings, in “Advanced Ceramics for Structural and Tribological Applications,” edited by H. M. Hawthorne and T. Troczynski (CIM, Montreal, Quebec, Canada, 1995) p. 127.
31. J. Larsen-Basse and B. Premaratne, in “ Wear of Materials,” edited by K. C. Ludema (ASME, New York, NY, 1982) p. 161.
32. B. R. Lawn, N. P. Padture, H. Cai and F. Guiberteau, Science 263 (1994) 1114.10.1126/science.263.5150.1114 ↗
33. Z. Bi, H. Tokura and M. Yoshikawa, J. Mat. Sci. 23 (1988) 3214.10.1007/BF00551297 ↗
34. H. P. Kirchner and E. D. Issacson, J. Am. Cream. Soc. 65 (1982) 55.10.1111/j.1151-2916.1982.tb09923.x ↗
35. C. P. Doğan and J. A. Hawk, “Abrasive Wear of Silicon Nitride Based Materials,” in preparation.
36. C. P. Doğan and J. A. Hawk, Wear 212 (1997) 110.10.1016/S0043-1648(97)00114-2 ↗
37. J. A. HAWK Idem., “Influence of Microstructure on the AbrasiveWear Behavior of Structural Ceramics,” in preparation.
38. B. J. Hockey, J. Am. Ceram. Soc. 54 (1971) 223.10.1111/j.1151-2916.1971.tb12277.x ↗
39. C. P. Doğan and J. A. Hawk, Wear 225-229 (1999) 1050.10.1016/S0043-1648(99)00036-8 ↗
40. M. OdÉn and T. Ericsson, J. Am. Ceram. Soc. 79 (1996) 2134.10.1111/j.1151-2916.1996.tb08947.x ↗
41. C. A. Powell-Doğan and A. H. Heuer, ibid. 73 (1990) 3684.10.1111/j.1151-2916.1990.tb04276.x ↗
42. Q. Ma and D. R. Clarke, ibid. 77 (1994) 298.10.1111/j.1151-2916.1994.tb06996.x ↗
43. I. M. Peterson and T.-Y. Tien, ibid. 78 (1995) 2345.10.1111/j.1151-2916.1995.tb08667.x ↗
44. R. H. Dauskardt and J. W. Ager III, Acta Mater. 44 (1996) 625.10.1016/1359-6454(95)00189-1 ↗
45. P. E. Becher, E. Y. Sun, C.-H. Hsueh, K. B. Alexander, S.-L. Hwang, S. B. Waters and C. G. Westmoreland, ibid. 44 (1996) 3881.10.1016/S1359-6454(96)00069-9 ↗
46. C. CM. Wu, R. W. Rice, D. Johnson and B. A. Platt, Ceramic Eng. Sci. Proc. 6 (1985) 995.10.1002/9780470320280.ch52 ↗
47. H. H. K. Xu, S. Jahanmir and Y. Yang, J. Am. Ceram. Soc. 78 (1995) 881.10.1111/j.1151-2916.1995.tb08409.x ↗
48. C. He, Y. S. Wang, J. S. Wallace and S. M. Hsu, Wear 162-164 (1993) 314.10.1016/0043-1648(93)90514-M ↗
49. O. O. Ajayi and K. C. Ludema, in “Wear of Materials, Vol. I,” edited by K. C. Ludema and R. G. Bayer (ASME, New York, NY, 1991) p. 307.
50. R. M. Anderson, T. A. Adler and J. A. Hawk, Wear 162-164 (1993) 1073.10.1016/0043-1648(93)90126-7 ↗
51. P. G. Orsini, A. Buri and A. Marotta, J. Am. Ceram. Soc. 58 (1975) 306.10.1111/j.1151-2916.1975.tb11483.x ↗
52. W. E. S. Turner, ibid. 12 (1929) 760.10.1111/j.1151-2916.1929.tb17054.x ↗
53. H. Sin, N. Saka and N. P. Suh, Wear 55 (1979) 163.10.1016/0043-1648(79)90188-1 ↗