journal article·2005-07

Identification and characterization of diffusion barriers for Cu/SiC systems

Glenn Sundberg, Pradeep Paul, Changmo Sung, Thomas Vasilos

Journal of Materials Science· Volume 40· Issue 13
Publisher page

Abstract

The promise of CuSiC metal matrix composites (MMCs) as a thermal management material is to provide increased power density and high reliability for advanced electronic systems. CuSiC will offer high thermal conductivity between 250 and 325 W/mK with corresponding adjustable thermal expansion coefficient between 8.0 and 12.5 ppm/∘C. The major challenge in development of these materials is control of the interface interactions. Cu and SiC react at high temperatures between 850 and 1150∘C, needed for fabrication of the CuSiC material, with an expected decrease in thermal conductivity of the CuSiC MMCs as the Si product of reaction dissolves into the Cu. The application of barrier coatings onto SiC was observed to control chemical reaction of Cu and SiC. In the current study, the effectiveness of four barriers to prevent Cu diffusion and reaction with SiC were evaluated between 850 to 1150∘C. Immersion experiments were conducted at 1150∘C to understand the reaction between copper and silicon carbide. Reaction products were identified with transmission electron microscopy (TEM) and electron diffraction. Laser flash thermal diffusivity measurements confirmed thermal conductivity to decrease with increasing silicon content of the copper as determined by induction coupled plasma mass spectrometry (ICPMS) and glow discharge mass spectrometry (GDMS).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. S. SESHAN, A. GURUPRASAD, M. PRABHA and A. SUDHAKAR, J. Ind. Inst. Sci. 76 (1996) 1.
2. M. TAN, Q. XIN, Z. LI and B. Y. ZONG, J. Mater. Sci. 36 (2001) 2045.10.1023/A:1017591117670 ↗
3. P. MOLDOVAN, UPB Sci. Bull. Series B: Chem. Mater. Sci. 61 (1999) 117.
4. S. SASTRY, M. KRISHNA and J. UCHIL, J. Mater. Engng. Perform. 10 (2001) 220.10.1361/105994901770345240 ↗
5. C. A. CHANG, J. Appl. Phys. 67 (1990) 556.
6. S. Y. JANG, S. M. LEE and H. K. BAIK, J. Mater. Sci: Mater. Electron. Soc. 7 (1991) 271.
7. C. A. CHANG, J. Appl. Phys. 67 (1990) 6184.10.1063/1.345183 ↗
8. S. Q. WANG, I. RAAIJMAKERS, B. J. BURROW, S. SUTHER, S. REDKAR and K. B. KIM, J. Appl. Phys. 68 (1990) 5176.10.1063/1.347059 ↗
9. K. HOLLOWAY, P. M. FRYER, C. CABRAL, JR., J. M. E. HARPER, P. J. BAILEY and K. H. KELLEHER, J. Appl. Phys. 71 (1992) 5433.10.1063/1.350566 ↗
10. S. Q. WANG, S. SUTHER, B. J. BURROW and C. HOEFLICH, J. Appl. Phys. 73 (1993) 2301.10.1063/1.353135 ↗
11. Z. AN, et al., Appl. Sur. Sci. 216 (2003) 169.10.1016/S0169-4332(03)00459-8 ↗
12. C. RADO, et al., Acta Mater. 48 (2000) 4483.10.1016/S1359-6454(00)00235-4 ↗
13. Y. T. KIM, et al., Thin Solid Films 347 (1999) 214.10.1016/S0040-6090(99)00040-1 ↗
14. K. M. LATT, et al., Mater. Sci. Engng. B84 (2001) 217.10.1016/S0921-5107(01)00618-3 ↗
15. R. HAY, personal correspondence, CPS Corporation, Chartley, MA, September 2004.