journal article·2007-05

Studies on the blends of modified epoxy resin and carboxyl-terminated polybutadiene (CTPB)—II: thermal and mechanical characteristics

Shailesh Kumar Shukla, Deepak Srivastava

Journal of Materials Science· Volume 42· Issue 9
Publisher page

Abstract

Blend samples were prepared by physical mixing of resole–epoxy blend with carboxyl-terminated polybutadiene (CTPB) liquid rubber ranging between 0 and 25 wt% in the interval of 5 wt%. Resoles were synthesized with phenol and various alkyl phenols. The blends were cured with 40 wt% polyamide. The structural changes during the curing were investigated by infra-red spectroscopic analysis. The presence of CTPB in resole-epoxy blends did not affected the values of cure times and ΔH whereas the gel time decreased up to 15 wt% addition of CTPB in the blends. The blend systems containing p-cresolic resole, epoxy and CTPB showed minimum gel time amongst all other blend samples. A clear-cut two-step mass loss in thermogravimetric (TG) trace of unmodified and CTPB-modified systems was observed. The mechanical properties of the blend samples were found to be affected by the CTPB addition. The plane strain fracture toughness (K IC) values of CTPB-modified matrix resins were greater that that for the unmodified resole/epoxy blends. This was further verified by scanning electron microscopic (SEM) analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. May CA, Tanaka GY (1973) Epoxy resin chemistry and technology. Marcel Dekker, New York
2. Kim JK, Robertson RE (1992) J Mater Sci 27:16110.1007/BF02403659 ↗
3. Frigione ME, Mascia L, Acierno D (1995) Eur Polym J 31:102110.1016/0014-3057(95)00091-7 ↗
4. Riew CK, Rowe EH, Siebert AR (1976) Adv Chem Ser 154:32610.1021/ba-1976-0154.ch027 ↗
5. Sultan JN, McGarry FJ (1973) Polym Engg Sci 13:2910.1002/pen.760130105 ↗
6. Visconti S, Marchessault RH (1974) Macromolecules 7:91310.1021/ma60042a040 ↗
7. Sasidharan AP, Latha PB, Ramaswamy R (1990) J Appl Polym Sci 41:15110.1002/app.1990.070410113 ↗
8. Verchere D, Pascault JP, Sautereau H, Moschiar SM, Riccardi CC, Williams RJJ (1991) J Appl Polym Sci 42:70110.1002/app.1991.070420315 ↗
9. Verchere D, Sautereau H, Pascault JP, Moschiar SM, Riccardi CC, Williams RJJ (1990) J Appl Polym Sci 41:46710.1002/app.1990.070410303 ↗
10. Bartlet P, Pascault JP, Sautereau H (1985) J Appl Polym Sci 30:295510.1002/app.1985.070300719 ↗
11. Chen TK, Jan YH (1991) Polym Engg Sci 31:57710.1002/pen.760310808 ↗
12. Ratna D, Banthia AK (2000) Polym Int 49:28110.1002/(SICI)1097-0126(200003)49:3<281::AID-PI353>3.0.CO;2-F ↗
13. Ratna D, Banthia AK (2000) Polym Int 49:30910.1002/(SICI)1097-0126(200003)49:3<309::AID-PI370>3.0.CO;2-0 ↗
14. Ratna D, Banthia AK, Deb PC (2000) J Appl Polym Sci 78:71610.1002/1097-4628(20001024)78:4<716::AID-APP40>3.0.CO;2-B ↗
15. Ratna D, Banthia AK, Deb PC (2001) J Appl Polym Sci 80:179210.1002/app.1275 ↗
16. Drake RS, Egan DR, Murphy WT (1982) Am Chem Soc Org Coating, J Appl Polym Sci Proc 46:46
17. Nigam V, Saraf MN, Mathur GN (1997) J Thermal Analysis 29:48310.1007/BF01987475 ↗
18. Shukla SK, Srivastava D (2003) Intl J Plast Tech 7:32
19. Lee H, Neville K (1967) Handbook of epoxy resins. McGraw Hill, New York
20. Kinloch AJ, Kodokian GA, Jamarani MB (1987) J Mat Sci 22:411110.1007/BF01133366 ↗
21. Barcia FL, Amaral TP, Soares BG (2003) Polymer 44:581110.1016/S0032-3861(03)00537-8 ↗
22. Latha PB, Adhinarayanan K, Ramaswamy R (1994) Intl J Adhes Adhes 14:5710.1016/0143-7496(94)90021-3 ↗
23. Bellenger V, Dahoui W, Verdu J, Galy J, Won TG, Pascault JP (1989) Polymer 30:201310.1016/0032-3861(89)90287-5 ↗
24. Tcharkhtchi A, Trotignon JP, Verdu J (1999) Macromol Symp 147:22110.1002/masy.19991470122 ↗
25. Pascault JP, Sautereau H, Verdu J, Williams RJJ (2002) Thermosetting polymers. Marcel Dekker, New York, p 35010.1201/9780203908402 ↗
26. Drzal LT (1986) Adv Polym Sci 75:4
27. Devanne T, Bry A, Audouin L, Verdu J (2005) Polymer 46:22910.1016/j.polymer.2004.07.039 ↗