journal article·2008-07

Tensile strength improvement of an Mg–12Gd–3Y (wt%) alloy processed by hot extrusion and free forging

Li Lin, Lijia Chen, Zheng Liu

Journal of Materials Science· Volume 43· Issue 13
Publisher page

Abstract

An Mg–12Gd–3Y (wt%) alloy was prepared by conventional casting method using permanent steel mold. Then this alloy was subjected to hot processing, involving hot extrusion and free forging. Tensile strength at room temperature can be improved, with the highest ultimate tensile strength (UTS) value of 390.2 MPa achieved by hot extrusion in comparison to that of as-cast alloy. Temperature dependence of tensile strength is distinguishable for the as-extruded alloy, while the relative stability in UTS values of the alloy after being freely forged should be ascribed to the inter-crossing among deformation bands located at various orientations and the accommodation effect of twining lamellas resulting from forging process on plastic deformation during tensile test at elevated temperatures. Further annealing after hot processing can only have adequate influence on the tensile strength of as-forged alloy. For the alloy freely forged and annealed at 523 K for 4 h, the highest UTS (441.1 MPa) at room temperature is found, which should be mainly related to an evolution from the original as-forged microstructure with subgrains to a more stable combination of large and refined grains through dynamic recrystallization during free forging, and the stress at offset yield YS (384.3 MPa) is also comparable to that relatively high value of 396.9 MPa after solution treatment and isothermal aging of the as-cast alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Anthony I, Kamado S, Kojima Y (2001) Mater Trans 42:120610.2320/matertrans.42.1206 ↗
2. Anthony I, Kamado S, Kojima Y (2001) Mater Trans 42:121210.2320/matertrans.42.1212 ↗
3. Smola B, Stulııkovaı I, von Buch F, Mordike BL (2002) Mater Sci Eng A 324:11310.1016/S0921-5093(01)01291-6 ↗
4. Vostryı P, Smola B, Stulııkovaı I, von Buch F, Mordike BL (1999) Phys Stat Sol A175:49110.1002/(SICI)1521-396X(199910)175:2<491::AID-PSSA491>3.0.CO;2-F ↗
5. Nie JF, Muddle BC (2000) Acta Mater 48:169110.1016/S1359-6454(00)00013-6 ↗
6. Apps PJ, Karimzadeh H, King JF, Lorimer GW (2003) Scripta Mater 48:102310.1016/S1359-6462(02)00596-1 ↗
7. Honma T, Ohkubo T, Hono K, Kamado S (2005) Mater Sci Eng A 395:30110.1016/j.msea.2004.12.035 ↗
8. Antion C, Donnadieu P, Perrard F, Deschamps A, Tassin C, Pisch A (2003) Acta Mater 51:533510.1016/S1359-6454(03)00391-4 ↗
9. Rokhlin LL (2003) Magnesium alloys containing rare earth metals. Taylor and Francis, London, p 110.1201/9781482265163 ↗
10. Rokhlin LL, Nikitina NI (1994) Z Metallkd 85:819
11. Akhtar A, Teghtsoonian E (1969) Acta Metall 17:133910.1016/0001-6160(69)90151-5 ↗
12. Akhtar A, Teghtsoonian E (1972) Philos Mag 25:89710.1080/14786437208229311 ↗
13. Sakai T, Jonas JJ (1984) Acta Metall 32:18910.1016/0001-6160(84)90049-X ↗
14. Ion SE, Humphreys FJ, White SH (1982) Acta Metall 30:190910.1016/0001-6160(82)90031-1 ↗
15. Belyakov A, Gao W, Miura H, Sakai T (1998) Metall Mater Trans 29A:295710.1007/s11661-998-0203-1 ↗
16. Belyakov A, Sakai T, Miura H (2000) Mater Trans 41:47610.2320/matertrans1989.41.476 ↗
17. Belyakov A, Sakai T, Miura H, Tsuzaki K (2001) Philos Mag 81A:262910.1080/01418610108216659 ↗
18. Sitdikov O, Goloborodko A, Sakai T, Miura H, Kaibyshev R (2003) Mater Sci Forum 426–432:38110.4028/www.scientific.net/MSF.426-432.381 ↗
19. Sitdikov O, Sakai T, Goloborodko A, Miura H, Kaibyshev R (2004) Mater Trans 45:223210.2320/matertrans.45.2232 ↗
20. Sitdikov O, Sakai T, Goloborodko A, Miura H, Kaibyshev R (2004) Mater Sci Forum 467–470:42110.4028/www.scientific.net/MSF.467-470.421 ↗
21. Sitdikov O, Sakai T, Goloborodko A, Miura H (2004) Scripta Mater 51:17510.1016/j.scriptamat.2004.02.034 ↗
22. Xing J, Yang XY, Miura H, Sakai T (2005) Mater Sci Forum 488–489:59710.4028/www.scientific.net/MSF.488-489.597 ↗
23. Sivakesavam O, Rao IS, Prasad YVRK (1993) Mater Sci Technol 9:805
24. Kaibyshev R, Sitdikov O (1992) Phys Met Metall 73:635
25. Kaibyshev R, Sitdikov O (1994) Z Metallkd 85:738
26. Kaibyshev R, Sitdikov O (2000) Phys Met Metall 89:384
27. Nie JF (2003) Scr Mater 48:100910.1016/S1359-6462(02)00497-9 ↗
28. Wilson DV (1970) J Inst Met 98:133
29. Hilpert M, Styczynski A, Kiese J, Wagner L (1998) Magnesium alloys and their applications. Wiley, Weinheim, Germany, p 319
30. Mukai T, Yamanoi M, Watanabe H, Higashi K (2001) Scripta Mater 45:8910.1016/S1359-6462(01)00996-4 ↗
31. Kaibyshev R, Sitdikov O (1995) Phys Met Metall 80:354
32. Kaibyshev R, Sitdikov O (1995) Phys Met Metall 80:470
33. Kaibyshev O, Valiev K (1987) Grain boundaries and properties of metals. Metallurgy, Moscow, p 214
34. Shtremel MA (1999) Strength of alloys. Lattice defects. MSAI, Moscow, p 547
35. Zaripov N, Vagapov A, Kaibyshev R (1987) Phys Met Metall 63:774