Influence of aging temperature, time, and environment on thermo-oxidative behavior of PMR-15: nanomechanical characterization
Source abstract
Abstract
A series of PMR-15 resin specimens were isothermally aged at 288, 316, and 343 °C over a range of time. For PMR-15 aged at 288 °C, the samples were also subjected to different aging environments including: ambient air, dry air, inert (argon), and pressurized air (0.414 MPa). Nanoindentation was performed to characterize localized mechanical properties as well as the development and growth of the oxidative layer. The measured increase in stiffness in the specimen surface oxidation layer is a manifestation of the chemical changes in the polymer occurring during oxidation. The average elastic modulus in the oxidized region is relatively insensitive to variations in aging temperature, time, and the environments. The thickness of the oxidative layer is observed to increase in the early stages of oxidation and the oxidation process eventually approaches an auto-retardation state. Aging under elevated pressure increases the thickness growth rate of the oxidation layer, while there is no significant difference in growth rate for specimens aged in dry air versus those aged in ambient air. It is shown that the measured average thickness of the oxidation layer and the transition region determined by the nanoindenter is in good agreement with optical microscopy measurements for all conditions considered.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Bowles KJ, Papadopoulos DS, Inghram LL, McCorkle LS, Klan OV (2001) NASA/TM-2001-210602
2. Tsuji LC, McManus HL, Bowles KJ (1998) NASA Technical Report -208487:1
3. Régnier N, Berriot J, Lafontaine E, Mortaigne B (2001) Polym Degrad Stab 73:48510.1016/S0141-3910(01)00136-7 ↗
4. Meadors MA, Lowell CE, Cavano PJ, Herrera-Fierro P (1996) High Perform Polym 8:36310.1088/0954-0083/8/3/003 ↗
5. Xie W, Pan WP, Chuang KC (2001) Thermochim Acta 367–368:14310.1016/S0040-6031(00)00698-5 ↗
6. Dole P, Chauchard J (1995) Polym Degrad Stab 47:44110.1016/0141-3910(95)00012-7 ↗
7. Briscoe BJ, Fiori L, Pelillo E (1998) J Phys D Appl Phys 31:239510.1088/0022-3727/31/19/006 ↗
8. Raghavan D, Gu X, Nguyen T, VanLandingham M, Karim A (2000) Macromolecules 33:257310.1021/ma991206r ↗
9. Gillen KT, Clough RL, Quintana CA (1987) Polym Degrad Stab 17:3110.1016/0141-3910(87)90046-2 ↗
10. Gregory JR, Spearing SM (2005) Compos Sci Technol 65:59510.1016/j.compscitech.2004.09.001 ↗
11. Parvatareddy H, Wang JZ, Lesko JJ, Dillard DA, Reifsnider KL (1996) J Compos Mater 30(2):21010.1177/002199839603000204 ↗
12. Gillen KT, Terrill ER, Winter RM (2001) Rubber Chem Technol 74(3):42810.5254/1.3547646 ↗
13. Oliver WC, Pharr GM (1992) J Mater Res 7(6):156410.1557/JMR.1992.1564 ↗
14. Pharr GM, Bolshakov A (2002) J Mater Res 17(10):266010.1557/JMR.2002.0386 ↗
15. Hay JL, Pharr GM (2000) ASM handbook. ASM International, Materials Park, p 232
16. Pharr GM (1998) Mater Sci Eng A253:15110.1016/S0921-5093(98)00724-2 ↗
17. Johnson LL, Eby RK, Meador MAB (2003) Polymer 44:18710.1016/S0032-3861(02)00726-7 ↗
18. Ripberger E, Tandon GP, Schoeppner GA (2004) In: Proceedings of the SAMPE 2004 symposium/exhibition, Long Beach, CA, 16–20 May
19. Putthanarat S, Tandon GP, Schoeppner GA (2007) Polym Degrad Stab 92:211010.1016/j.polymdegradstab.2007.07.007 ↗
20. Tandon GP, Pochiraju KV, Schoeppner GA (2006) Polym Degrad Stab 91(8):186110.1016/j.polymdegradstab.2005.11.008 ↗
21. Schoeppner GA, Tandon GP, Pochiraju KV (2007) In: Kwon Y, Allen D, Talreja, R (eds) Multiscale modeling and simulation of composite materials and structures. Springer, New York
22. Oliver WC, Pharr GM (2004) J Mater Res 19(1):310.1557/jmr.2004.19.1.3 ↗
23. McElhaney KW, Vlassak JJ, Nix WD (1998) J Mater Res 13(5):130010.1557/JMR.1998.0185 ↗
24. Li X, Bhushan B (2002) Mater Charact 48:1110.1016/S1044-5803(02)00192-4 ↗
25. Mencik M, Swain MV (1995) J Mater Res 10(6):149110.1557/JMR.1995.1491 ↗
26. Thorp KE (2000) PhD Dissertation, University of Dayton, Dayton