journal article·2003-01

Tensile deformation mechanism of polyamide 6,6/SEBS-g-MA blend and its hybrid composites reinforced with short glass fibers

Sie Chin Tjong, Shi-Ai Xu, Yiu-Wing Mai

Journal of Materials Science· Volume 38· Issue 2
Publisher page

Abstract

Short glass fiber (SGF) reinforced polyamide 6,6 hybrid composites toughened with maleated styrene-ethylene butylenes-styrene (SEBS-g-MA) elastomer were prepared by compounding and subsequent injection molding. The hybrids were reinforced with 5, 10, 15, 20 and 30 wt% SGF. The matrix of the hybrids consisted of 80 wt% PA6,6 and 20 wt% SEBS-g-MA. Dilatometery was employed to characterize the deformation mechanisms of tough PA6,6/SEBS-g-MA 80/20 blend and its hybrid composites under uniaxial tension. Dilatometric responses showed that both cavitation and shear yielding occur in PA6,6/SEBS-g-MA 80/20 blend during deformation. And the cavitation deformation prevailed over shear yielding in this blend after the initial elastic deformation. Moreover, the volume strain was observed to increase considerably with increasing SGF content for the hybrids investigated. SEM examination revealed that microvoids originated from the debonding of glass fiber from the PA6,6 matrix were responsible for the cavitation strain in the hybrids. Consequently, cavitation deformation predominated over shear yielding in hybrids.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Epoxy Resin Curing Processes · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. K. Dijkstra, J. Ter Laak and R. J. Gaymans, Polymer 35 (1994) 315.10.1016/0032-3861(94)90696-3 ↗
2. A. J. Oshinski, H. Kekskula and D. R. Paul, ibid. 33 (1992) 268.10.1016/0032-3861(92)90984-5 ↗
3. Idem., ibid. 33 (1992) 284.10.1111/j.1748-5827.1992.tb01144.x ↗
4. Y. Takeda, H. Kekskula and D. R. Paul, ibid. 33 (1992) 3173.10.1016/0032-3861(92)90231-K ↗
5. S. C. Wong and Y. W. Mai, ibid. 40 (1999) 1553.10.1016/S0032-3861(98)00363-2 ↗
6. S. C. Tjong and S. A. Xu, J. Appl. Polym. Sci. 81 (2001) 3231.10.1002/app.1777 ↗
7. T. J. Pecorini and R. W. Hertzberg, Polym. Compos. 15 (1994) 174.10.1002/pc.750150303 ↗
8. M. L. Shiao, S. V. Nair, P. D. Garrett and R. E. Pollard, Polymer 35 (1994) 306.10.1016/0032-3861(94)90695-5 ↗
9. S. V. Nair, A. Subramaniam and L. A. Goettler, J. Mater. Sci. 32 (1997) 5335.10.1023/A:1018618912039 ↗
10. Idem., ibid. 32 (1997) 5347.
11. Idem., ibid. 33 (1998) 3455.
12. M. E. J. Dekkers and D. J. Heikens, J. Appl. Polym. Sci. 30 (1985) 2389.10.1002/app.1985.070300610 ↗
13. Idem., J. Mater. Sci. 20 (1985) 3873.10.1007/BF00552375 ↗
14. M. E. J. Dekkers, S. Y. Hobbs and V. H. Watkins, ibid. 23 (1988) 1225.10.1007/BF01154582 ↗
15. S. Y. Hobbs and M. E. J. Dekkers, ibid. 24 (1989) 1316.10.1007/PL00020214 ↗
16. C. B. Bucknall, D. Clayton and W. J. Keast, ibid. 8 (1973) 514.10.1007/BF00550456 ↗
17. C. B. Bucknall and W. W. Stevens, ibid. 5 (1980) 2950.10.1007/BF00550360 ↗
18. C. B. Bucknall and C. J. Page, ibid. 17 (1982) 808.10.1007/BF00540378 ↗
19. C. B. Bucknall, D. Clayton and W. J. Keast, ibid. 19 (1984) 2064.10.1007/BF00550274 ↗
20. C. B. Bucknall, P. Davies and J. K. Partridge, ibid. 21 (1986) 307.10.1007/BF01144737 ↗
21. C. B. Bucknall, P. S. Heather and A. J. Lazzeri, ibid. 24 (1989) 2255.10.1007/BF02385450 ↗
22. S. I. Naqui and I. M. Robinson, ibid. 28 (1993) 1421.10.1007/BF00363333 ↗
23. J. M. C. Schwarz, H. Keskkula, J. W. Barlow and D. R. Paul, J. Appl. Polym. Sci. 35 (1988) 653.10.1002/app.1988.070350308 ↗
24. A. Gonzalez-Montial, H. Keskkula and D. R. Paul, Polymer 36 (1995) 4621.10.1016/0032-3861(95)96830-2 ↗
25. S. A. Xu and C. M. Chan, Polymer J. 30 (1998) 552.10.1295/polymj.30.552 ↗
26. S. A. Xu and S. C. Tjong, J. Appl. Polym. Sci. 77 (1999) 2024.10.1002/1097-4628(20000829)77:9<2024::AID-APP19>3.0.CO;2-3 ↗
27. S. C. Tjong, S. A. Xu, R. K. Y. Li and Y. W. Mai, Compos. Sci. Technol. 62 (2002) 831.10.1016/S0266-3538(02)00037-4 ↗
28. Idem., Polym. Int., in-press.
29. Idem., J. Appl. Polym. Sci. 86 (2002) 1303.10.1002/app.11095 ↗
30. D. Heikens, S. D. Sjoerdsma and W. J. Coumans, J. Mater. Sci. 8 (1973) 514.10.1007/BF00550456 ↗
31. Idem., ibid. 16 (1981) 429.10.1016/0531-5565(81)90064-4 ↗