Thermal wave interferometry for measuring the thermal diffusivity of thin slabs
Source abstract
Abstract
Thermal wave interferometry applied to the evaluation of thermal diffusivity of freestanding coatings and single layers is herewith presented. Measurements on a set of eight different materials (oxides free copper, an aluminium alloy, Armco iron, AISI 316 stainless steel, Nimonic90 and IN738 nickel based alloys and Yttria partially stabilised Zirconia coatings) have been carried out. The corresponding thermal diffusivity values cover a very large range (about three order of magnitude). A comparison of 1D and 3D models has been done in order to optimise the main measurement parameters. Sample thickness, heating beam size and modulation frequency range have been selected in order to maximise the photothermal signal and its phase variation as a function of the frequency. Experimental results give evidence of a very good agreement between literature and experimental values for all samples confirming the capability of this technique for measuring the thermal diffusivity of thin slabs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Ultrasonics and Acoustic Wave Propagation · Calibration and Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A. J. ÅngstrÖm, Phil. Mag. 25 (1863) 130.10.1080/14786446308643429 ↗
2. M. H. De Senarmont, Annales de Chimie Physique 3(2) (1848) 179.
3. W. P. Parker, R. J. Jenkins, C. P. Butter, G. L. Gutter and G. L. Abbott, J. Appl. Phys. 32 (1961) 1679.10.1063/1.1728417 ↗
4. ASTM C714-72 Standard test method for thermal diffusivity of carbon and graphite by a thermal pulse method (1972).
5. BS7134: Section 4.2: 1990; “Method for the determination of thermal diffusivity by the laser flash (or heat pulse) method” (British Standards Institution, 1990).
6. JIS R 1611: Testing methods of thermal diffusivity, specific heat capacity and thermal conductivity for high performance ceramics by laser flash method (Japanese Standards Association, 1991).
7. D. P. Almond and P. M. Patel, “Photothermal Science and Techniques” (Chapman & Hall, London, 1996).
8. G. Rousset and F. Lepoutre, Rev. Phys. Appl. 17 (1982) 201.10.1051/rphysap:01982001704020100 ↗
9. P. K. Kuo, M. J. Lin, C. B. Reyes, L. D. Favro, R. L. Thomas, D. S. Kim, S. Y. Zhang, L. J. Inglehart, D. fournier, A. C. Boccara and N. Yacoubi, Can. J. Phys. 64 (1986) 1165.10.1139/p86-202 ↗
10. P. K. Kuo, E. D. Sendler, L. F. Favro and R. L. Thomas, ibid. 64 (1986) 1168.10.1139/p86-203 ↗
11. A. Salazar, A. Sanchez-Lavega and J. Fernandez, J. Appl. Phys. 1 (1991) 1216.10.1063/1.347306 ↗
12. A. Figari, ibid. 71 (1992) 3128.10.1063/1.350980 ↗
13. Idem., in Proceedings of the Eurotherm Seminar n°27 QIRT 92, Chatenay-Malabry, July 1992, edited by D. Balageas, G. Busse and G. M. Carlomagno (Editions Europeennes Thermique et Industrie, Paris, 1992), p. 377.
14. A. Glazov and K. Muratikov, J. Appl. Phys. 76(6) (1994) 3279.10.1063/1.357449 ↗
15. A. Glazov and K. Muratikov Idem., Opt. Eng 36(2) (1997) 358.10.1117/1.601208 ↗
16. C. A. Bennett and R. R. Patty, Appl. Opt. 21 (1982) 49.10.1364/AO.21.000049 ↗
17. P. M. Patel and D. P. Almond, J. Mater. Sci. 20 (1985) 955.10.1007/BF00585740 ↗
18. H. P. R. Frederikse, X. T. Ying and A. Feldman, Mater. Res. Soc. Symp. Proc. 142 (1989) 289.10.1557/PROC-142-289 ↗
19. L. Fabbri, F. Cernuschi, P. Fenici, S. Ghia and G. M. Piana, in Proceedings of Materials for Advanced Power Engineering, Liege, October 1994, edited by D. Coutsouradis et al. (Kluwer, Dordrecht, 1994) Part II, p. 1377.
20. L. Fabbri and P. Fenici, Rev. Sci. Instrum. 66(6) (1995) 3593.10.1063/1.1146443 ↗
21. L. Pottier and K. Plamman, J. Phys. IV C7 (1994) 295.
22. J. Opsal and A. Rosencwaig, J. Appl. Phys. 53(6) (1982) 4240.10.1063/1.331250 ↗
23. A. Rosencwaig, J. Opsal, D. L. Willenborg, S. M. Kelso and J. T. Fanton, Appl. Phys. Lett. 60 (1992) 1301.10.1063/1.107323 ↗
24. L. Chen, J. Ding, A. Salnick, H. Chu, J. Opsal and A. Rosencwaig, in AIP Conference Proceedings n° 463 Photoacoustic and Photothermal Phenomena, Rome, August 1998, edited by F. Scudieri and M. Bertolotti (AIP Woodbury, New York, 1999) p. 102.
25. J. P. Roger, F. Lepoutre, D. Fournier and A. C. Boccara, Thin Solid Films 155 (1987) 165.10.1016/0040-6090(87)90462-7 ↗
26. U. Zammit, F. Gasparini, M. Marinelli, R. Pizzoferrato, F. Scudieri and S. Martellucci, J. Appl. Phys. 69 (1991) 2577.10.1063/1.348646 ↗
27. P. Cielo, L. A. Utracki and M. Lamontagne, Can J. Phys. 64 (1986) 1172.10.1139/p86-204 ↗
28. L. C. Aamodt, J. W. Maclachlan Spicer and J. C. Murphy, J. Appl. Phys. 68(12) (1990) 6087.10.1063/1.346897 ↗
29. W. P. Leung and A. C. Tam, ibid. 56(1) (1984) 153.10.1063/1.333739 ↗
30. L. Fabbri and F. Cernuschi, ibid. 82(11) (1997) 5305.10.1063/1.366296 ↗
31. UNI 3571 Data sheet.
32. Y. S. Touloukian, “Thermophysical Properties of High Temperature Solid Materials” Vol. 10 Thermal diffusivity (IFI-PLENUM, New York, 1973).
33. G. Busse and H. G. Walther, in “Progress in Photothermal and Photoacoustic Science and Technology,” edited by A. Mandelis (Elsevier, New York, 1992).
34. INCO. Nimonic 90 Alloy Data Sheet.
35. J. C. Murphy, J. W. Maclachlan and L. C. Aamodt, in “Review of Quantitative Nondestructive Evaluation Vol. 7A,” edited by D. O. Thompson and D. E. Chimenti (Plenum Publishing Corporation, New York, 1988).
36. P. Bianchi, F. Cernuschi, A. Figari, L. Lorenzoni and G. Negri, Internal report ENEL SRI-PDM-MAR-98-82.
37. L. Pawlowski, D. Lombard, A. Mahlia, C. Martin and P. Fauchais, High Temp.-High Press 16 (1984) 347.
38. F. Cernuschi, P. Bianchi, M. Leoni and P. Scardi, Journal of Thermal Spray Technology 8(1) (1999) 102.10.1361/105996399770350629 ↗