Superplastic flow in nanocrystalline and sub-microcrystalline yttria-stabilized tetragonal zirconia
Source abstract
Abstract
Tensile deformation of nanocrystalline ZrO2 + 5 mol% Y2O3 at temperatures in the range of 1283–1403 K is described. It is demonstrated (a) that steady state flow is possible at temperatures of the order of 0.42 Tm, where Tm is the absolute melting point, (b) that 70% engineering strain could be obtained at 1403 K (0.46 Tm), and (c) that significant grain boundary sliding was present during deformation. Static and dynamic grain growth as also a decrease in the relative density of the specimen with deformation could be observed. The present results as well as those of Owen and Chokshi concerning superplastic flow in sub-microcrystalline materials taken from literature could be accounted for quantitatively using the grain boundary sliding controlled flow model of Padmanabhan and Schlipf, originally proposed for microcrystalline superplastic alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. K. A. Padmanabhan and G. J. Davies, “Superplasticity” (Springer Verlag, Heidelberg-Berlin-New York, 1980).10.1007/978-3-642-81456-3 ↗
2. O. A. Kaibyshev, “Superplasticity in Alloys, Intermetallides and Ceramics” (Springer Verlag, Berlin, 1992).10.1007/978-3-642-84673-1 ↗
3. T. G. Nieh, J. Wadsworth and O. D. Sherby, “Superplasticity in Metals and Ceramics” (Cambridge University Press, 1997).10.1017/CBO9780511525230 ↗
4. F. Wakai, S. Sakaguchi and Y. Matsuno, Adv. Ceram. Mater. 1 (1986) 259.10.1111/j.1551-2916.1986.tb00026.x ↗
5. F. Wakai and H. Kato, ibid. 3 (1988) 71.10.1111/j.1551-2916.1988.tb00173.x ↗
6. T. G. Langdon, JOM 42(7) (1990) 8.10.1007/BF03221010 ↗
7. F. Wakai, Acta Metall. Mater. 42 (1994) 1163.10.1016/0956-7151(94)90133-3 ↗
8. S. Primdahl, A. Thoelen and T. G. Langdon, ibid. 43 (1995) 1211.10.1016/0956-7151(94)00307-4 ↗
9. J. A. Hines, Y. Ikuhara, A. H. Chokshi and T. Sakuma, Acta Mater. 46 (1998) 5557.10.1016/S1359-6454(98)00171-2 ↗
10. F. Wakai, in Proc. MRS Int. Meeting on Advanced Materials, edited by M. Doyama, S. Somiya and R. P. H. Chang, Vol. 7, MRS, Pittsburgh, Pa. (1989) p. 225.
11. M. Nauer and C. Carry, in “Euro-Ceramics,” edited by G. de With, R. A. Terpstra and R. Metselaar, Vol. 3 (Elsevier Applied Science, London, 1989) p. 323.
12. J. Ye, A. Dominguez-Rodriguez, R. E. Medrano and O. A. Ruano, in Third Euro-Ceramics, edited by P. Duran and J. F. Fernandez, Vol. 3 (Faenza Editrice Iberica, Castellon de la Plana, Spain, 1993) p. 525.
13. D. M. Owen and A. H. Chokshi, Acta Mater. 46 (1998) 667.10.1016/S1359-6454(97)00251-6 ↗
14. M. Z. Berbon and T. G. Langdon, ibid. 47 (1999) 2485.10.1016/S1359-6454(99)00099-3 ↗
15. K. A. Padmanabhan, Ph.D. Thesis, University of Cambridge, U.K., 1971.
16. Idem., Mater. Sci. Eng. 29 (1977) 1.10.1016/0025-5416(77)90140-9 ↗
17. Idem., ibid. 40 (1979) 285.10.2307/2106324 ↗
18. J. W. Edington, K. N. Melton and C. P. Cutler, Prog. Mater. Sci. 21 (1976) 61.10.1016/0079-6425(76)90005-0 ↗
19. R. C. Gifkins and T. G. Langdon, Mater. Sci. Eng. 36 (1978) 27.10.1016/0025-5416(78)90192-1 ↗
20. Idem., ibid. 40 (1979) 293.10.1051/jphys:01979004003029300 ↗
21. K. N. Melton and J. W. Edington, Metal Sci. 17 (1983) 408.10.1179/030634583790420727 ↗
22. R. Z. Valiev and T. G. Langdon, Acta Metall. Mater. 41 (1993) 949.10.1016/0956-7151(93)90029-R ↗
23. H. Hahn and K. A. Padmanabhan, Phil.Mag. 76B (1997) 559.10.1080/01418639708241122 ↗
24. H. Hahn, P. Mondal and K. A. Padmanabhan, Nanostructured Materials 9 (1997) 603.10.1016/S0965-9773(97)00135-9 ↗
25. K. A. Padmanabhan, J. Metastable and Nanocrystalline Materials 8 (2000) 753.10.4028/www.scientific.net/JMNM.8.753 ↗
26. M. V. Speight, Acta Metall. 23 (1975) 779.10.1016/0001-6160(75)90060-7 ↗
27. Idem., Scr. Metall. 10 (1976) 163.10.1016/0036-9748(76)90141-1 ↗
28. K. A. Padmanabhan and J. Schlipf, Mater. Sci. Technol. 12 (1996) 391.10.1179/026708396790165920 ↗
29. W. Beere, J. Mater. Sci. 12 (1977) 209.10.1007/BF00561984 ↗
30. O. Engler, K. A. Padmanabhan and K. LÜcke, Modelling and Simulation in Mater. Sci. Eng. 8 (2000) 477.10.1088/0965-0393/8/4/306 ↗
31. V. V. Astanin, S. N. Faizova and K. A. Padmanabhan, Mater. Sci. Technol. 12 (1996) 489.10.1179/mst.1996.12.6.489 ↗
32. V. V. Astanin, K. A. Padmanabhan and S. S. Bhattacharya, ibid. 12 (1996) 545.10.1179/mst.1996.12.7.545 ↗
33. T. A. Venkatesh, S. S. Bhattacharya, K. A. Padmanabhan and J. Schlipf, ibid. 12 (1996) 635.10.1179/mst.1996.12.8.635 ↗
34. F. U. Enikeev, K. A. Padmanabhan and S. S. Bhattacharya, ibid. 15 (1999) 637.10.1179/026708399101506265 ↗
35. D. Wolf, Acta Metall. Mater. 38 (1990) 781, 791.10.1016/0956-7151(90)90030-K ↗
36. H. Hahn, NanoStruct. Mat. 9 (1997) 3.10.1016/S0965-9773(97)00013-5 ↗
37. J. R. Seidensticker and M. J. Mayo, Scripta Mat. 38 (1998) 1091.10.1016/S1359-6462(98)00004-9 ↗
38. M. A. Clarke and T. H. Alden, Acta Met. 21 (1973) 1195.10.1016/0001-6160(73)90160-0 ↗
39. D. S. Wilkinson and C. H. Caceres, ibid. 32 (1984) 1335.10.1016/0001-6160(84)90079-8 ↗
40. D. J. Sherwood and C. H. Hamilton, Scripta Mat. 25 (1991) 2873.10.1016/0956-716X(91)90172-W ↗
41. B. N. Kim, K. H. Hiraga, Y. Sakka and B. W. Ahn, Acta Mat. 47(12) (1999) 3433.10.1016/S1359-6454(99)00201-3 ↗
42. P. M. Hazzledine and D. E. Newbury, “Grain Boundary Structure and Properties,” edited by G. A. Chadwick and D. A. Smith (Academic Press, London, 1976) p. 235.
43. Tsoga and P. Nikolopoulos, J. Mater. Sci. 31 (1996) 5409.10.1007/BF01159310 ↗
44. R. Chaim, A. H. Heuer and D. G. Brandon, J. Amer. Ceram. Soc. 69 (1986) 243.10.1111/j.1151-2916.1986.tb07417.x ↗
45. A. S. Argon, Acta Metall. 27 (1979) 47.10.1016/0001-6160(79)90055-5 ↗
46. A. H. Cottrell, “Theoretical Structural Metallurgy” (The English Language Book Society and Edward Arnold (Publishers) Ltd, London, 1964) p. 182.
47. U. Betz, Ph.D. Thesis, Darmstadt University of Technology, Germany, 2000.