journal article·2000-09

Determination of bond strength in glass fibre reinforced cement using petrography and image analysis

P. Purnell, A. J. Buchanan, N. R. Short, C. L. Page, A. J. Majumdar

Journal of Materials Science· Volume 35· Issue 18
Publisher page

Abstract

The reinforcement in glass fibre reinforced cement (grc) is not present as discrete fibres, but as ‘strands’ of about 200 filaments each. This configuration greatly complicates determination of the ‘perimeter’ of the reinforcing elements, a crucial parameter in bond strength determination. Previous investigators have attempted to quantify strand perimeters but their methods have always involved at least one subjective step and are prone to operator bias. This paper describes an objective method of determining strand perimeters using digital analysis of images captured from petrological thin sections. The measured perimeters were found to be sensitive to the “threshold value” chosen for the analysis, and consideration of perimeter vs. threshold value curves eliminated subjectivity involved in the analysis. The perimeter value obtained, together with microscopic analysis of the crack patterns produced during tensile testing, were used for calculating bond parameters for different cement matrices. The development of bond with both ageing time and temperature were also studied. The method uses fundamental image analysis concepts and as such is readily adaptable to solve conceptually similar problems in a wide range of materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. D. Tripathi and F. R. Jones, J. Mater. Sci. 33 (1998) 1.10.1023/A:1004351606897 ↗
2. P. BartoŠ, ibid. 15 (1980) 3122.10.1007/BF00550385 ↗
3. Idem., in Proceedings of the PCI Symposium on Durability of Glass-fiber Reinforced Concrete, Illinois, USA, November 1985, edited by S. Diamond, p. 136.
4. V. Laws, A. A. Langley and J. M. West, J. Mater. Sci. 21 (1986) 289.10.1007/BF01144734 ↗
5. E. A. Naaman, G. G. Namur, J. M. Alwan, and H. S. Najm, J. Structural Eng. 117 (1991) 2791.10.1061/(ASCE)0733-9445(1991)117:9(2791) ↗
6. W. Zhu and P. J. M. BartoŠ, Cem. Concr. Res. 27 (1997) 1701.10.1016/S0008-8846(97)00155-5 ↗
7. P. J. M. BartoŠ and W. Zhu, Cem. Concr. Composites 18 (1996) 31.10.1016/0958-9465(95)00041-0 ↗
8. J. Aveston, G. A. Cooper and A. Kelly, in Proceedings of the NPL Conference, UK, November 1971 (IPC Science and Technology Press 1971) p. 15.
9. J. Aveston and A. Kelly, J. Mater. Sci. 8 (1973) 352.10.1007/BF00550155 ↗
10. J. Aveston, R. A. Mercer and J. M. Sillwood, in Proceedings of the NPL Conference, UK, April 1974 (UK, IPC Science and Technology Press, 1974) p. 93.
11. D. R. Oakley and B. A. Procter, in Proceedings of the RILEM Symposium on Fibre Reinforced Cement and Concrete, London, September 1975, edited by A. Neville (UK, Lancs., Construction Press) p. 347.
12. M. Kameki, D. J. Hannant and M. Mulheron, Mag. Concr. Res. 48 (1996) 229.10.1680/macr.1996.48.176.229 ↗
13. S. P. Shah, in Proceedings of the PCI Symposium on Durability of Glassfiber Reinforced Concrete, Illinois, USA, November 1985, edited by S. Diamond, p. 91.
14. S. H. Li, Z. Li, T. Mura and S. P. Shah, Eng. Fracture Mechanics 43 (1992) 561.10.1016/0013-7944(92)90199-O ↗
15. V. Laws, Composites 113 (1982) 145.10.1016/0010-4361(82)90051-9 ↗
16. P. Purnell, PhD Thesis, Aston University, 1998.
17. P. Purnell, N. R. Short, C. L. Page, A. J. Majumdar and P. L. Walton, Composites Pt. A 30 (1999) 1073.10.1016/S1359-835X(99)00019-6 ↗