Effects of sulfur on interfacial energy between Fe-C melt and graphite
Source abstract
Abstract
We used an improved sessile drop method, which can measure the equilibrium contact angle of molten Fe-C-S alloys on graphite basal planes using an equilibrated method. We adopted this method for the measurement of the interfacial energy, γ s/l , between the basal plane of graphite and the Fe-C melts at 1573 K in a purified He-3%H 2 atmosphere. For the calculation of γ s/l , we have to use the true graphite surface energy, γ s/v and the surface tension of the iron melt, γ l/v , as the reference. However, we could not get a reliable γ s/l value from the literature, because the γ s/v value could be changed by the contamination of the vapor from the melt. For this reason, we measured the γ s/v value using a nonequilibrated method based on the interfacial energy balance at the trijunction using γ l/v and the contact angle 6 and Φ, where θ is the contact angle between the liquid metal and graphite substrate observed during the measurement by an optical microscope, and Φ is the hidden angle observed at cross section of the sample. We found that the γ s/v and γ s/l values decrease when the sulfur contents are greater than 10 mass ppm sulfur. From 10 to 120 ppm sulfur, the decreasing rate has a constant value on a logarithmic scale of sulfur activities. The morphology of the graphite changes from spheroidal to flake as γ s/l decreases due to increase in the sulfur content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Graphite, nuclear technology, radiation studies · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. F. H. BUTTNER, H. F. TAYLOR and J. WULFF, Amer. Foundryman Oct. (1951) 49.
2. J. KEVERIAN and H. F. TAYLOR, Trans. AFS 65 (1957) 212.
3. R. H. MCSWAIN and C. E. BATES, in Proceedings of the 2nd International Symposium on the Metallurgy of Cast Iron, (Geneva, 1974) p. 421.
4. G. T. VAN ROOYEN and G. PAUL, Metal Science 8 (1974) 370.10.1179/msc.1974.8.1.370 ↗
5. E. SELCUK, in Proceedings of the 2nd International Symposium on the Metallurgy of Cast Iron, (Geneva, 1974) p. 409.
6. S. K. RHEE, J. Am. Ceram. Soc. 55 (1972) 300.10.1111/j.1151-2916.1972.tb11289.x ↗
7. H. FUJI, H. NAKAE and K. OKADA, Acta Mater. 41 (1993) 2963.10.1016/0956-7151(93)90111-5 ↗
8. L. BORUVKA and A. W. NEUMANN, J. Chem. Phys. 66 (1977) 5464.10.1063/1.433866 ↗
9. G. LEVI and W. D. KAPLAN, Acta Mater 51 (2003) 2793.10.1016/S1359-6454(03)00084-3 ↗
10. T. YOUNG, Phil. Trans. Royal Soc, London 95 (1805) 65.10.1098/rstl.1805.0005 ↗
11. C. F. WALTON and T. J. OPAR,“Iron Castings Handbook”, (Iron Castings Society, 1981)
12. B. E. NEIMARK et al., Russian Castings Production (1967) 435.
13. B. J. KEENE, Int. Mater. Rev. 33 (1988) 1.10.1179/imr.1988.33.1.1 ↗
14. J. P. MORRIS and R. C. BUEHL, Trans. AIME 188 (1950) 317.
15. S. BANYA and J. CHIPMAN, Trans. Metall. Soc. AIME 245 (1969) 133.
16. S. V. SUBRAMANIAN, D. A. R. KAY and G. R. PURDY, Mat. Res. Soc. Symp. Proc. 34 (1985) 47.10.1557/PROC-34-47 ↗
17. W. OLDFIELD, Trans. AFS 79 (1971) 455.