Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes
Source abstract
Abstract
High-density polyethylene resins have increasingly been used in the production of pipes for water- and gas-pressurized distribution systems and are expected to remain in service for several years, but they eventually fail prematurely by creep fracture. Usual standard methods used to rank resins in terms of their resistance to fracture are expensive and non-practical for quality control purposes, justifying the search for alternative methods. Essential work of fracture (EWF) method provides a relatively simple procedure to characterize the fracture behavior of ductile polymers, such as polyethylene resins. In the present work, six resins were analyzed using the EWF methodology. The results show that the plastic work dissipation factor, βw p, is the most reliable parameter to evaluate the performance. Attention must be given to specimen preparation that might result in excessive dispersion in the results, especially for the essential work of fracture w e.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Underground Structures · Asphalt Pavement Performance Evaluation · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Hamouda HB, Simoes-Betbeder M, Grillon F, Blouet P, Billon N, Piques R (2001) Polymer 42:542510.1016/S0032-3861(00)00490-0 ↗
2. Jansson L-E (2003) Plastic pipes for water supply and sewage disposal, VBB/SWECO International, Stockholm
3. Mills NJ (1993) Plastics: microestructure & engineering applications, 2nd edn. Edward Arnold, London
4. Peres FM (2007) Desenvolvimento de métodos alternativos para a avaliação da resistência à fratura por fluência de resinas de polietileno utilizadas para a extrusão de tubos de água. Master in Engineering Dissertation”, Escola Politécnica da Universidade de São Paulo, São Paulo-SP, Brazil, 2005. https://doi.org/www.teses.usp.br/teses/disponiveis/3/3133/tde-08112005-092736 . Accessed 24 Aug
5. Fayole B, Verdu J (2005) Polym Eng Sci 45:42410.1002/pen.20241 ↗
6. ISO 9080 (2003) Plastic-piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
7. Peres FM, Schön CG (2007) J Polym Res 14:18110.1007/s10965-006-9095-1 ↗
8. ISO12162 (1995) Thermoplastic materials for pipes and fitting for pressure applications—classification and designation—overall service (design) coefficient
9. Fleissner M (1998) Polym Eng Sci 38:33010.1002/pen.10194 ↗
10. Ting SKM, Williams JG, Ivankovic A (2006) Polym Eng Sci 46:76310.1002/pen.20543 ↗
11. Cotterell B, Reddel JK (1977) Int J Frac 13:26710.1007/BF00040143 ↗
12. Mai Y-W, Powell P (1991) J Polym Sci B Polym Phys 29:78510.1002/polb.1991.090290702 ↗
13. Marchal Y, Walhin J, Delannay F (1997) Int J Frac 87:18910.1023/A:1007482121146 ↗
14. Tjong SC, Xu SA, Li RKY (2000) J Appl Polym Sci 77:207410.1002/1097-4628(20000829)77:9<2074::AID-APP25>3.0.CO;2-# ↗
15. Karger-kocsis J, Czigáni T, Moskala EJ (1997) Polymer 38:458710.1016/S0032-3861(96)01061-0 ↗
16. Pardoen T, Marchal Y, Delannay F (2002) Eng Frac Mech 69:61710.1016/S0013-7944(01)00099-6 ↗
17. Lach R, Schneider K, Weidich R, Janke A, Knoll K (2005) Eur Polym J 41:38310.1016/j.eurpolymj.2004.09.021 ↗
18. Williams JG, Rink M (2007) Eng Frac Mech 74:100910.1016/j.engfracmech.2006.12.017 ↗
19. Clutton E (2001) In: Moore DR, Pavan A, Williams JG (eds) Fracture mechanics testing methods for polymers, adhesives and composites, Elsevier, Amsterdam, ESIS Publication 28).
20. Hashemi S (1997) J Mater Sci 32:156310.1023/A:1018582707419 ↗
21. Gere JM, Timochenko SP (1991) Mechanics of materials. Chapman & Hall, London, p 41110.1007/978-1-4899-3124-5 ↗
22. Broberg KB (1968) Int J Frac Mech 4:1110.1007/BF00189139 ↗
23. Broberg KB (1971) J Mech Phys Solids 19:40710.1016/0022-5096(71)90008-1 ↗
24. Broberg KB (1975) J Mech Phys Solids 23:21510.1016/0022-5096(75)90017-4 ↗
25. Barenblatt GI (1962) In: Dryden HL, von Kármán Th (eds) Advances in applied mechanics, vol 7. Academic Press, New York, p 55
26. Wong JSS, Ferrer-balas D, Li RKY, Mai Y-W, Maspoch ML, Sue H-J (2003) Acta Mater 51:492910.1016/S1359-6454(03)00335-5 ↗
27. Kim HS, Karger-kocsis J (2004) Acta Mater 52:312310.1016/j.actamat.2004.03.013 ↗
28. Chan WYF, Williams JG (1994) Polymer 35:166610.1016/0032-3861(94)90840-0 ↗
29. Saleemi AS, Nairn JA (1990) Polym Eng Sci 30:21110.1002/pen.760300404 ↗
30. Wu J, Mai YW (1996) Polym Eng Sci 36:227510.1002/pen.10626 ↗
31. Jing B, Dai W, Chen S, Hu T, Liu P (2007) Mater Sci Eng A 444:8410.1016/j.msea.2006.08.036 ↗
32. Tjong SC, Xu SA, Mai YW (2003) Mater Sci Eng A 347:33810.1016/S0921-5093(02)00609-3 ↗
33. Dasari A, Misra RDK (2003) Mater Sci Eng A 358:35610.1016/S0921-5093(03)00330-7 ↗
34. Mai YW, Cotterell B (1985) Eng Frac Mech 21:12310.1016/0013-7944(85)90059-1 ↗
35. Pegoretti A, Marcchi A, Riccò T (1997) Polym Eng Sci 37:104510.1002/pen.11749 ↗
36. Kinlock AJ, Williams JG (1980) J Mater Sci 15:98710.1007/BF00552112 ↗