Drug release from a N-vinylpyrrolidinone/acrylic acid lubricious hydrophilic coating
Source abstract
Abstract
Initial characterisation was performed on different crosslinked hydrogels to determine the suitability for coating applications. The test used in the initial stage of the work was swelling studies. From this test a suitable monomeric concentration was decided upon. The coating was applied to the Pebax® 3533 substrate using a dip coating/UV curing procedure. The coating was characterised by measuring the coating thickness, the relative viscosity, the density and the contact angle it made with the substrate. The coating was analysed using Ftir, optical microscopy and friction analysis to characterise the lubricious nature of the coating. From this analysis it was found that 2 coating cycles were necessary to give a good coverage thoughout the entire length of the substrate, and that the static coefficient was significantly reduced from that of the uncoated samples when the coating was hydrated for 10 min or more. Finally the release profile of aspirin was determined using UV spectroscopy, where it was found that the release rate could be controlled by varying the molecular weight of the crosslinking agents used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogels: synthesis, properties, applications · Advanced Polymer Synthesis and Characterization · Microfluidic and Capillary Electrophoresis Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Y. IKADA and Y. UYAMA, Lubricating Polymer Surfaces. Technomic Pub. Co. (1993).
2. S. CONROY, Med. Device Tech. 20(4) (1998).10.1002/inst.1998114a ↗
3. R. J. WHITBOURNE, Lubricous Hydrophilic Coating, Resistant to Wet Abrasion. Patent no. 5331027 (1994).
4. I. REHMAN, Development of Novel Polymeric Materials for Biosensors and Tissue Engineering Applications.
5. J. -F. YAUNG and T. K. KWEI, pH Sensitive Hydrogels Based on Polyvinylpyrrolidinone-Polyacrylic Acid (PVP-PAA) Semi Interpenetrating Networks (semi-IPN): Swelling and Controlled Release. 69 (1997) 921.
6. M. V. RISBUD, A. A. HARDIKAR, S. V. BHAT and R. R. BHONDE, J. Contr. Rel. 68 (2000) 23.10.1016/S0168-3659(00)00208-X ↗
7. N. B. GRAHAM. Chem. & Ind. 482–486 (1990).
8. C. H. HASSAN, J. E. STEWART and N. A. PEPPAS, Euro J. Pharm. Biopharm. 49 (2000) 161.10.1016/S0939-6411(99)00056-9 ↗
9. A. M. McNAIR, Med. Dev. Tech. 16–22 (1996).10.1002/bult.11 ↗
10. H. ICHIKAWA and Y. FUKUMORI, J. Contr. Rel. 63 (2000) 107.10.1016/S0168-3659(99)00181-9 ↗
11. F. EECKMAN, A MOÉS and K. Amighi, Intern. J. Pharm. 241 (2002) 113.10.1016/S0378-5173(02)00198-9 ↗
12. N. SHOJI, M. NOMURA and Y. YOKOYAMA, Methods for Producing 2-Hydroxy-Ethyl Methacrylate Polymer, Hydrogel and Water-Containing Soft Contact Lenses. Patent no. EP 0874 007 A1. (1997).
13. B. D. RATHNER and A. S. HOFFMAN, ACS Symposium Series, No. 31. Amer. Chem. Soc., Washington D.C. (1976).
14. K. KONO, R. NAKAI, K. MORIMOTO and T. TAKAGISHI, FEBS Lett. 456 (1999) 306.10.1016/S0014-5793(99)00975-8 ↗
15. K. KONO, A. HENMI, H. YAMASHITA, H. HAYASHI and T. TAKAGISHI, J. Contrl. Rel. 59 (1999) 63.10.1016/S0168-3659(98)00180-1 ↗
16. A. DOBASHI, K. KURATA and M. SENOO, Analytical Sci. 16 (2000) 829.10.2116/analsci.16.829 ↗
17. M. KAPNISTOS, A. HINRICHS, D. VLASSOPOULOS, S. ANASTASIADIS and A. STAMMER, B. Wolf. Macromol. 29 (1996) 7155.10.1021/ma960835n ↗
18. A. ROOS, D. KLEE, K. SCHUERMANN and H. HÓCKER, Biomaterials. 24 (2003) 4417.10.1016/S0142-9612(03)00342-9 ↗
19. N. A. Peppas and S. L. WRIGHT, J. Pharm. Biopharm. 46 (1998) 15.10.1016/S0939-6411(97)00113-6 ↗
20. B. L. BALES, A. M. HOWE, A. R. PITT and P. C. GRIFFITHS, J. Phys. Chem. B. 104 (2000) 264.10.1021/jp993290i ↗
21. M. AM ENDE and N. PEPPAS, Transport of Ionisable Drugs and Proteins in Crosslinked Poly (Acrylic Acid) and Poly(Acrylic Acid-Co-2-Hydroxyethyl Methacrylate) Hydrogels. 1. Polymer characterization, J. Appli. Polym. Sci. 59 (1996) 673.10.1002/(SICI)1097-4628(19960124)59:4<673::AID-APP13>3.0.CO;2-R ↗
22. P. BURES and N. A. PEPPAS, A.C.S. Polym. Mat: Sci. Eng. 83 (2000) 506.
23. R. RODRÍGUEZ, C. ALVAREZ-LORENZO and A. Concheiro, J. Control Rel. 86 (2003) 253.10.1016/S0168-3659(02)00410-8 ↗
24. J. HENDRI, A. HIROKI, Y. MAEKAWA, M. YOSHIDA and R. KATAKAI, Radiat Phys. Chem. 60 (2001) 617.10.1016/S0969-806X(00)00352-2 ↗
25. K. AIKAWA, K. MATSUMOTO, H. UDA, S. TANAKA, H. SHIMAMURA, Y. ARAMAKI and S. TSUCHIYA, Internat. J. Pharm. 167 (1998) 97.10.1016/S0378-5173(98)00057-X ↗
26. M. JONES, Euro Polym. J. 35 (1999) 795.10.1016/S0014-3057(98)00066-4 ↗
27. C. ALVAREZ-LORENZO and A. CONCHEIRO, J. Contr. Rel. 80 (2002) 247.10.1016/S0168-3659(02)00032-9 ↗
28. D. DEVINE and C. HIGGINBOTHAM, Polymer. 44 (2004) 7851.10.1016/j.polymer.2003.10.017 ↗
29. T. OKANO (Ed.) “Biorelated Polymers and Gels: Controlled Release and Applications in Biomedical Engineering,” Academic Press. (1998).
30. Y. HONG, T. CHIRILA, M. CUYPERS and I. CONSTABLE, J. Biomat App. 11 (1996) 135.10.1177/088532829601100202 ↗
31. J. Y. LEE, P. C. PAINTER and M. M. COLEMAN, Macromolecules. 21 (1988) 346.10.1021/ma00180a011 ↗
32. J. Y. LEE, P. C. PAINTER and M. M. COLEMAN, Macromolecules. 21 (1988) 954.10.1021/ma00182a019 ↗
33. H. K. JU, S. Y. KIM, S. J. KIM and Y. M. LEE, J. Appl. Polym. Sci. 83 (2002) 1128.10.1002/app.10137 ↗
34. D. DEVINE, L. GEEVER and C. HIGGINBOTHAM, The Synthesis and Characterisation Testing of Crosslinked NVP/AA Copolymers for Medical Applications. PIMS 2004, Cambridge. Conference Proceedings.
35. R. J. LAPORTE, “Hydrophilic Polymer Coatings for Medical Devices,” Technomic Pub. Co. Inc. (1997).
36. N. NURDIN, E. WEILANDT, M. TEXTOR, M. TABORELLI, N. D. SPENCER and P. DESCOUTS, J. Appl. Polym. Sci. 61 (1996) 1939.10.1002/(SICI)1097-4628(19960912)61:11<1939::AID-APP8>3.0.CO;2-K ↗