Comparative study on the compressive performance of honeycomb structures fabricated by stereo lithography apparatus
Source abstract
Abstract
Abstract To investigate the influence of materials on the surface morphology and compressive performance of honeycomb structural components prepared by stereo lithography apparatus (SLA) technology, three typical materials, namely Dutch State Mines (DSM) 8000, Somos ® Taurus, and FS 3400GF (Glass Bead Filled Nylon Powder), were selected as raw materials for printing honeycomb structure via SLA. FS 3400GF can withstand a maximum compression force of 14.1 kN in vertical compression, while it is 10.1 kN for DSM 8000 and 5.8 kN for Somos ® Taurus, indicating that FS 3400GF bears significantly higher vertical pressure. The maximum force bore by FS 3400GF under lateral compression is 0.47 kN, DSM 8000 is 0.56 kN, and Somos ® Taurus is 0.17 kN, suggesting that the lateral compression failure is highly likely to occur. The mechanical compression failure reveals the physical properties of honeycomb structures and provides an experimental support for expanding the potential functional application of honeycomb structures in additive manufacturing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Design and Art, Shanghai Dianji University , Shanghai , 201306 , China
School of Materials, Shanghai Dianji University , Shanghai , 201306 , China
School of Mechanical Engineering, Shanghai Dianji University , Shanghai , 201306 , China
Zhejiang Lianda Forging Co., Ltd , Zhejiang , 325200 , China
References (33)
Show source-provided references
1. Najmon, J. C., Raeisi, S., Tovar, A. (2019). Review of additive manufacturing technologies and applications in the aerospace industry. In: F. Froes, R. Boyer, (Eds.), Additive manufacturing for the aerospace industry (pp. 7–31). Elsevier, Amsterdam, Netherlands.10.1016/B978-0-12-814062-8.00002-9 ↗
2. Bhanvadia, A. A., Farley, R. T., Noh, Y., Nishida, T. (2021). High-resolution stereolithography using a static liquid constrained interface. Communications Materials, 2, 1–7.10.1038/s43246-021-00145-y ↗
3. Zhongliang, L. U., Bo, J. I., Jiangping, Z. H., Kai, M. I., Dichen, L. I. (2014). Defects control of manufacturing ceramic mold of hollow turbine blade based on stereo lithography. Journal of Mechanical Engineering, 50, 111–117.10.3901/JME.2014.21.111 ↗
4. Wang, Y. Q., Wu, H. Y., Jia, Z. Y., Huang, W., Lu, B. H. (2012). Research on the accuracy of mask projection stereo-lithography. Advanced Materials Research, 566, 542–547.10.4028/www.scientific.net/AMR.566.542 ↗
5. Grabulosa, A., Moughames, J., Porte, X., Brunner, D. (2022). Combining one and two photon polymerization for accelerated high performance (3 + 1)D photonic integration. Nanophotonics, 11, 1591–1601.10.1515/nanoph-2021-0733 ↗
6. Rajamanickam, V. P., Ferrara, L., Toma, A., Proietti Zaccaria, R., Das, G., Di Fabrizio, E., et al. (2014). Suitable photo-resists for two-photon polymerization using femtosecond fiber lasers. Microelectronic Engineering, 121, 135–138.10.1016/j.mee.2014.04.040 ↗
7. Zhang, X., Xu, Y., Li, L., Yan, B., Bao, J., Zhang, A. (2019). Acrylate-based photosensitive resin for stereolithographic three-dimensional printing. Journal of Applied Polymer Science, 136, 47487.10.1002/app.47487 ↗
8. Kang, X., Li, X., Li, Y., Zhang, X., Duan, Y. (2021). Continuous 3D printing by controlling the curing degree of hybrid UV curing resin polymer. Polymer, 237, 124284.10.1016/j.polymer.2021.124284 ↗
9. Hughes, T., Simon, G. P., Saito, K. (2019). Photocuring of 4-arm coumarin-functionalised monomers to form highly photoreversible crosslinked epoxy coatings. Polymer Chemistry, 1, 2134–2142.10.1039/C8PY01767K ↗
10. Abdallah, M., Bui, T., Goubard, F., Theodosopoulou, D., Dumur, F., Hijazi, A., et al. (2019). Phenothiazine derivatives as photoredox catalysts for cationic and radical photosensitive resins for 3D printing technology and photocomposite synthesis. Polymer Chemistry, 1, 6145–6156.10.1039/C9PY01265F ↗
11. Shahzadi, L., Maya, F., Breadmore, M. C., Thickett, S. C. (2022). Functional materials for DLP-SLA 3D printing using thiol-acrylate chemistry: resin design and postprint applications. ACS Applied Polymer Materials, 4, 3896–3907.10.1021/acsapm.2c00358 ↗
12. Krishnasamy, B., Shanmugaraj, B. P., Murugavel, S. C., Dai, L., Petri, D. F. S. (2020). Investigation on dual functional epoxy resins containing photosensitive group in the main chain for photoresist applications. International Journal of Polymer Analysis & Characterization, 25, 198–215.10.1080/1023666X.2020.1780849 ↗
13. Tan, S., Wu, Y., Hou, Y., Deng, H., Liu, X., Wang, S., et al. (2022). Waste nitrile rubber powders enabling tougher 3D printing photosensitive resin composite. Polymer, 243, 124609.10.1016/j.polymer.2022.124609 ↗
14. Sugita, H., Matsumura, N., Matsumoto, H., Tanaka, K. (2019). Micro-patterning of functional coatings guided by a photosensitive degradable template. Progress in Organic Coatings, 132, 264–274.10.1016/j.porgcoat.2019.02.038 ↗
15. Qi, C., Jiang, F., Yang, S. (2021). Advanced honeycomb designs for improving mechanical properties: a review. Composites. Part B, Engineering, 227, 109393.10.1016/j.compositesb.2021.109393 ↗
16. Mohammadi, H., Ahmad, Z., Petrů, M., Mazlan, S. A., Faizal Johari, M. A., Hatami, H., et al. (2023). An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption. Journal of Materials Research and Technology, 22, 2862–2887.10.1016/j.jmrt.2022.12.063 ↗
17. Mondal, S., Katzschmann, R., Clemens, F. (2023). Magnetorheological behavior of thermoplastic elastomeric honeycomb structures fabricated by additive manufacturing. Composites Part B: Engineering, 252, 110498.10.1016/j.compositesb.2023.110498 ↗
18. Koch, S., Duvigneau, F., Orszulik, R., Gabbert, U., Woschke, E. (2017). Partial filling of a honeycomb structure by granular materials for vibration and noise reduction. Journal of Sound and Vibration, 393, 30–40.10.1016/j.jsv.2016.11.024 ↗
19. Amith Kumar, S. J., Ajith Kumar, S. J. (2020). Low-velocity impact damage and energy absorption characteristics of stiffened syntactic foam core sandwich composites. Construction & Building Materials, 246, 118412.10.1016/j.conbuildmat.2020.118412 ↗
20. Ingrole, A., Hao, A., Liang, R. (2017). Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement. Materials & Design, 117, 72–83.10.1016/j.matdes.2016.12.067 ↗
21. Huang, W., Zhang, Y., Xu, Y., Xu, X., Wang, J. (2021). Out-of-plane mechanical design of bi-directional hierarchical honeycombs. Composites Part B, Engineering, 221, 109012.10.1016/j.compositesb.2021.109012 ↗
22. Zhang, Y., Xu, X. (2022). Machine learning surface roughnesses in turning processes of brass metals. International Journal of Advanced Manufacturing Technology, 121, 2437–2444.10.1007/s00170-022-09498-1 ↗
23. Zhang, Y., Xu, X. (2021). Machine learning cutting force, surface roughness, and tool life in high speed turning processes. Manufacturing Letters, 29, 84–89.10.1016/j.mfglet.2021.07.005 ↗
24. Yang, D., Guo, L., Fan, C. (2024). Mechanical behavior of 3D-printed thickness gradient honeycomb structures. Materials, 17, 2928.10.3390/ma17122928 ↗
25. Kou, J., Li, Y., Yang, P., Zhang, J. (2017). A novel blood coagulation measuring method based on the viscoelasticity of non-Newtonian fluid. World Journal of Engineering and Technology, 5, 134–151.10.4236/wjet.2017.54B015 ↗
26. Huang, B. W., Du, Z., Tao, Y., Han, W. (2017). Preparation of a novel hybrid type photosensitive resin for stereolithography in 3D printing and testing on the accuracy of the fabricated parts. Journal of Wuhan University of Technology (Materials Science), 32, 726–732.10.1007/s11595-017-1659-x ↗
27. Huang, B. W., Weng, Z. X., Sun, W. (2011). Study on the properties of DSM SOMOS 11120 type photosensitive resin for stereolithography materials. Advanced Materials Research, 233–235, 194–197.10.4028/www.scientific.net/AMR.233-235.194 ↗
28. Fu, M., Higashihara, T., CA, M. U., Abaimov, S. G. (2017). Recent progress in thermally stable and photosensitive polymers. Polymer Journal, 50, 57–76.10.1038/pj.2017.46 ↗
29. Hong, H., Nasrollahi, A., Park, S. (2021). Transparent UV-blocking photonic film based on reflection of cholesteric liquid crystals. Journal of Molecular Liquids, 344, 117739.10.1016/j.molliq.2021.117739 ↗
30. Vasiliev, E. O., Sethi, S. K., Nath, B. B. (2011). Nonequilibrium carbon ionization states and the extragalactic far-UV background with HeII absorption. Astrophysics and Space Science, 335, 211–215.10.1007/s10509-010-0585-6 ↗
31. Tonietto, L., Gonzaga, L., Veronez, M. R., Kazmierczak, C. D. S., Arnold, D. C. M., Costa, C. A. D. (2019). New method for evaluating surface roughness parameters acquired by laser scanning. Scientific Reports, 9, 15016–15038.10.1038/s41598-019-51545-7 ↗
32. Myshkin, N. K., Grigoriev, A. Y., Chizhik, S. A., Choi, K. Y., Petrokovets, M. I. (2003). Surface roughness and texture analysis in microscale. Wear, 254, 1001–1009.10.1016/S0043-1648(03)00306-5 ↗
33. Stagnaro, P., Utzeri, R., Vignali, A., Falcone, G., Iannace, S., Bertini, F. (2021). Lightweight polyethylene-hollow glass microspheres composites for rotational molding technology. Journal of Applied Polymer Science, 138, 49766.10.1002/app.49766 ↗