journal article·2003-07

Dispersant-assisted hydrothermal synthesis of MnZn ferrites from raw oxides

M. Drofenik, A. Zcaron;nidaršič, M. Kristl, A. Košak, D. Makovec

Journal of Materials Science· Volume 38· Issue 14
Publisher page

Abstract

MnZn-ferrite powders were prepared using hydrothermal syntheses of a homogenous mixture of the raw oxides, i.e., Fe2O3, ZnO and Mn3O4, at 280°C in air. The hydrothermal synthesis was performed in the presence of various amounts of an anionic dispersant. The final results of the hydrothermal reaction between the raw oxides were fine powders with a heterogeneous phase composition mostly composed of iron oxide and spinel products. The composition of the spinel products depended to a great extent on the amount of dispersant in the hydrothermally treated suspension. Without the dispersant addition, Zn ferrite and Zn manganate spinel products were formed, while in the presence of the dispersant, the ferrimagnetic MnZn-ferrite spinel product was obtained. A larger amount of the dispersant in the reaction mixture increased the conversion rate of the raw oxides into the Mn,Zn ferrite spinel product. Additionally, polyvinyl alcohol (PVA) was used during the hydrothermal synthesis in order to bind the chlorine impurities, introduced into the hydrothermally prepared powder with the raw Fe2O3. With the PVA burnout, the level of chlorine impurities was decreased by approximately 50%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Pigment Synthesis and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. D. Autissier and L. Autissier, in Proceedings of the 6th International Conference on Ferrites (ICF-6), Tokyo, September 1992, edited by T. Yamaguchi and M. Abe (The Japan Society of Powder and Powder Metallurgy) p. 132.
2. M. Rozman and M. Drofenik, J. Amer. Ceram. Soc. 78(9) (1995) 2449.10.1111/j.1151-2916.1995.tb08684.x ↗
3. S. Kumarnani, E. Fregeou, E. Breval and R. Roy, ibid. 71(1) (1988) C26.
4. R. Lucke, E. Schlegel and R. Strienitz, in Proceedings of the 7th International Conference on Ferrites, Bordeaoux, Septemer 1996, edited by V. Cagan and M. Guiyot (Les Editions de Physique) p. C1–63.
5. A. ŽnidarŠiČ, M. Drofenik and D. Makovec, in Digest of the 8th International Conference on Ferrites, Kyoto, September 2002 (The Japan Society of Powder and Powder Metallurgy) p. 162.
6. D. Makovec, M. Drofenik and A. ŽnidarŠiČ, J. Amer. Ceram. Soc. 82(5) (1999) 113.10.1111/j.1151-2916.1999.tb01884.x ↗
7. Idem., J. Eur. Ceram. Soc. 21(10/11) (2001) 1945.10.1016/S0955-2219(01)00148-0 ↗
8. A. Dakskobler and T. KosmaČ, J. Amer. Ceram. Soc. 83(3) (2000) 666.10.1111/j.1151-2916.2000.tb01253.x ↗
9. F. H. Chung, J. Appl. Crystallogr. 7 (1974) 519.10.1107/S0021889874010375 ↗