journal article·2001-03

A novel Ni-CERMET electrode based on a proton conducting electrolyte

L. N. Van Rij, J. Le, R. C. Van Landschoot, J. Schoonman

Journal of Materials Science· Volume 36· Issue 5
Publisher page

Abstract

Based on the one-chamber fuel cell design by Iwahara a catalytic methane sensor has been developed. The working principle of this sensor is based on the difference in catalytic properties of two electrodes for the CO2 reforming reaction of methane. The sensor is based on a high-temperature proton conducting electrolyte, i.e. SrCe0.95Yb0.05O3−α or CaZr0.9In0.1O3−α. At 500 °C a linear sensor response on the methane partial pressure has been found for a Ru/SrCe0.95Yb0.05O3−α/Pt cell. This cell, however, shows poor long-term stability. The long-term stability of the Ru/SrCe0.95Yb0.05O3−α/Pt cell is improved using a more stable electrolyte material, i.e. CaZr0.9In0.1O3−α(CZI10). Further improvement of the long-term stability of the sensor is achieved using a nickel-CaZr0.9In0.1O3−α CERMET (Ni-CZI10) electrode. The sensor response of a Ni-CZI10/CaZr0.9In0.1O3−α/Pt cell is found to be linear at 600 °C and 700 °C, respectively. The temperature dependence of both the Ru/SrCe0.95Yb0.05O3−α/Pt and the Ni-CZI10/CaZr0.9In0.1O3−α/Pt cell can be explained by the temperature dependence of the catalytic activity of the electrode materials used. This confirms that the obtained EMF is established by a catalytic activity difference between both electrodes. The power output of a Ni-CZI10/CaZr0.9In0.1O3−α/Pt cell is also determined. A combined sensor-fuel cell would have the advantage that it is able to detect the fuel concentration in the gas and, therefore, correct in-situ for fluctuations in the fuel concentration. The power output of the Ni-CZI10/CaZr0.9In0.1O3−α/Pt cell, however, is found to be 0.01 mW · cm−2. This low power output, with respect to values reported in literature for the one-chamber fuel cell, can be explained by the relatively thick electrolyte used, the electrode materials chosen, and the use of the reforming reaction of methane instead of the partial oxidation of methane. However, the feasibility of the combined sensor-fuel cell has been demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Gas Sensing Nanomaterials and Sensors · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. T. Hibino and H. Iwahara, Chem. Lett. (1993) 1131.10.1246/cl.1993.1131 ↗
2. T. Hibino, K. Asano and H. Iwahara, ibid. (1994) 4
3. K. Asano, T. Hibino and H. Iwahara, SOFC-IV 95-1 (1995) 58.
4. K. Asano, T. Hibino and H. Iwahara, J. Electrochem. Soc. 142 (1995) 3241.10.1149/1.2049968 ↗
5. T. Hibino, S. Wang, S. Kakimoto and M. Sano, Solid State Ionics 127 (2000) 89.10.1016/S0167-2738(99)00253-2 ↗
6. Idem., Electrochem. Solid-State Lett. 2 (1999) 317.10.1149/1.1390822 ↗
7. T. Hibino, Y. Kuwahara and S. Wang, J. Electrochem. Soc. 146 (1999) 2821.10.1149/1.1392014 ↗
8. I. Riess, P. J.v. d. PUT and J. SCHOONMAN, Solid State Ionics 82 (1995) 1.10.1016/0167-2738(95)00210-W ↗
9. M. J. G. Jak, S. Raz, L. N. v. Rij and I. Riess, Solid State Ionics, submitted.
10. J. Le, L. N. v. Rij and J. Schoonman, J. Electrochem. Soc., accepted for publication (2000).
11. L. N. van Rij, R. C. van Landschoot and J. Schoonman, in Proc. 11th Eur. Conf. Solid State Transducers, Eurosensors XI (1997) Vol. 1, p. 143.
12. L. N. v. Rij, R. van Landschoot and J. Schoonman, in Proc. 12th International Conference on Solid State Ionics, Halkidiki, Greece, 1999, p. 574.
13. J. R. Rostrup-Nielsen and J. H. B. Hansen, J. Catal. 144 (1993) 38.10.1006/jcat.1993.1312 ↗
14. P. D. F. Vernon, M. L. H. Green, A. K. Cheetham and A. T. Ashcroft, Cat. Today 13 (1992) 417.10.1016/0920-5861(92)80167-L ↗
15. D. Qin and J. Lapszewicz, ibid. 21 (1994) 551.10.1016/0920-5861(94)80179-7 ↗
16. H. Iwahara, T. Esaka, H. Uchida and N. Maeda, Solid State Ionics 3/4 (1981) 359.10.1016/0167-2738(81)90113-2 ↗
17. H. Iwahara, H. Uchida and N. Maeda, J. Power Sources 7 (1982) 293.10.1016/0378-7753(82)80018-9 ↗
18. Idem., Solid State Ionics 11 (1983) 109.10.1016/0167-2738(83)90047-4 ↗
19. H. Uchida, H. Yoshikawa and H. Iwahara, ibid.34 (1989) 103.10.1016/0167-2738(89)90439-6 ↗
20. H. Uchida, N. Maeda and H. Iwahara, ibid.11(1983) 117.10.1016/0167-2738(83)90048-6 ↗
21. T. Scherban and A. S. Nowick, ibid.35 (1989) 189.10.1016/0167-2738(89)90029-5 ↗
22. H. Iwahara, H. Uchida, K. Morimoto and S. Hosogi, J. Appl. Electrochem. 19 (1989) 448.10.1007/BF01015250 ↗
23. H. Uchida, S. Tanaka and H. Iwahara, J. Appl. Electrochem. 15 (1985) 93.10.1007/BF00617745 ↗
24. H. Matsumoto, Y. Iida and H. Iwahara, ibid. 127 (2000) 345.
25. H. Matsumoto, T. Suzuki and H. Iwahara, ibid. 116 (1999) 99.
26. G. Marnellos, O. Sanopoulou, A. Rizou and M. Stoukides, ibid. 97 (1997) 375.
27. F. Deschutter, J. Vangrunderbeek, J. Luyten and W. Engelen, Sensors and Actuators B 24/25 (1995) 462.10.1016/0925-4005(94)01396-9 ↗
28. M. H. Zheng and X. X. Zhen, Metall. Trans. B 24 (1993) 789.10.1007/BF02663139 ↗
29. H. Iwahara, Solid State Ionics 77 (1995) 289.10.1016/0167-2738(95)00051-7 ↗
30. Idem.,ibid. 86–88 (1996) 9.
31. Idem., Solid State Ionics: Materials and Applications (1992) 247.
32. T. Yajima, H. Kazeoka and H. Iwahara, Solid State Ionics 47 (1991) 271.10.1016/0167-2738(91)90249-B ↗
33. H. Iwahara, T. Yajima, T. Hibino, K. Ozaki and H. Suzuki, ibid. 61 (1993) 65.10.1016/0167-2738(93)90335-Z ↗
34. K. D. Kreuer, ibid. 97 (1997) 1.10.1016/S0167-2738(97)00082-9 ↗
35. S. V. Bhide and A. V. Virkar, J. Electrochem. Soc. 146 (1999) 2038.10.1149/1.1391888 ↗
36. M. J. Scholten, J. Schoonman, J. C. v. Miltenburg and H. A. J. Oonk, Solid State Ionics 61 (1993) 83.10.1016/0167-2738(93)90338-4 ↗
37. N. Kurita, N. Fukatsu and T. Ohashi, J. Jpn. Inst. Met. 58 (1994) 782.10.2320/jinstmet1952.58.7_782 ↗
38. W. Engelen, A. Buekenhoudt, J. Luyten and F. Deschutter, Solid State Ionics 96 (1997) 55.10.1016/S0167-2738(96)00615-7 ↗
39. T. Yajima, K. Koide, N. Fukatsu, T. Ohashi and H. Iwahara, Sensors and Actuators B 13/14 (1993) 697.10.1016/0925-4005(93)85149-5 ↗
40. H. Iwahara, H. Uchida and S. Tanaka, J. Appl. Electrochem. 16 (1986) 663.10.1007/BF01006916 ↗
41. H. Iwahara, T. Esaka, H. Uchida and K. Gaki, Solid State Ionics 18/19 (1986) 1003.10.1016/0167-2738(86)90299-7 ↗
42. J. Le, L. N. van Rij, R. C. van Landschoot and J. Schoonman, J. Eur. Cer. Soc. 19 (1999) 2589.10.1016/S0955-2219(99)00045-X ↗
43. L. N. van Rij, L. Winnubst, J. Le and J. Schoonman, J. Mat. Chem. 10(11) (2000) 2515.10.1039/b003840g ↗
44. E. M. Kelder, O. C. J. Nijs and J. Schoonman, Solid State Ionics 68 (1994) 5.10.1016/0167-2738(94)90239-9 ↗
45. N. L. H. Stelzer, C. H. Chen, L. N. V. Rij and J. Schoonman, in 10th IEA SOFCWorkshop, Annex VII, Les Diablerets, Zwitserland, 1997, Vol. 2, p. 236.