journal article·2000-08

Hydrogen transport and environmental embrittlement effects in iron aluminides

W. C. Luu, J. K. Wu

Journal of Materials Science· Volume 35· Issue 16
Publisher page

Abstract

Environmental embrittlement types of six iron aluminides have been systematically evaluated using electrochemical hydrogen permeation measurement, hydrogen microprint technique and tensile test in this study. The results of hydrogen permeation and microprint technique show that three α - disordered solid solution structure of binary and ternary iron aluminides (Fe-10Al, Fe-18Al, and Fe-18Al-5Cr) have higher effective diffusivity and permeation rate than B2 ordered structure of binary and ternary iron aluminides (Fe-28Al, Fe-28Al-5Cr, and Fe-40Al). The tensile test of six iron aluminides in air, vacuum treatment and hydrogen precharged were analyzed and concluded. Three α - disordered solid solution structure of iron aluminides suffer in hydrogen environment which are quite different embrittlement mechanisms from those B2 ordered structure of iron aluminides with serious tensile loss in air by moisture induced embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. G. Mckamey, J. H. Devan, P. F. Tortorelli and V. K. Sikka, J. Mater. Res. 6 (1991) 1779.10.1557/JMR.1991.1779 ↗
2. N. S. Stoloff and C. T. Liu, Intermetallics 2 (1994) 75.10.1016/0966-9795(94)90001-9 ↗
3. Y. F. Zhu, C. T. Liu and C. H. Chen, Scr. Mater. 35 (1996) 1435.10.1016/S1359-6462(96)00316-8 ↗
4. C. T. Liu, J. L. Wright and N. S. Stoloff, ibid. 38 (1998) 1601.10.1016/S1359-6462(98)00088-8 ↗
5. M. Inoue, K. Suganuma and K. Niihara, ibid. 39 (1998) 1477.10.1016/S1359-6462(98)00351-0 ↗
6. K. Yoshimi and S. Hanada, J. Metals 49 (1997) 46.
7. P. Banerjee and R. Balasubramaniam, Scr. Mater. 38 (1998) 1143.10.1016/S1359-6462(97)00577-0 ↗
8. N. S. Stoloff and D. J. Duquette, J. Metals 43 (1993) 30.
9. A. Bahadur and O. N. Mohanty, J. Mater. Sci. 26 (1991) 2685.10.1007/BF02387737 ↗
10. R. J. Lynch, W. W. Miligan and L. A. Heldt, in Parkins Symposium on Fundamental Aspects of Stress Corrosion Cracking, TMS, Warrendale, USA, 1992, p. 117.
11. J. P. Tu, L. Meng and M. S. Liu, Scr. Mater. 38 (1998) 833.10.1016/S1359-6462(97)00534-4 ↗
12. P. Banerjee and R. Balasubramaniam, ibid. 39 (1998) 1215.10.1016/S1359-6462(98)00307-8 ↗
13. I. R. Robertson and D. Teter, J. Metals 48 (1996) 55.
14. X. Y. Cheng and X. J. Wan, Scr. Mater. 38 (1998) 1215.
15. L. M. Pike and C. T. Liu, ibid. 38 (1998) 1475.10.1016/S1359-6462(98)00087-6 ↗
16. H. Hosoda, K. Mizuuchi and K. Inoue, J. Metals 49 (1997) 56.
17. C. L. Fu and G. S. Painter, J. Mater. Res. 6 (1991) 719.10.1557/JMR.1991.0719 ↗
18. W. C. Luu and J. K. Wu, Materials Letters 24 (1995) 175.10.1016/0167-577X(95)00068-2 ↗
19. J. K. Wu Idem., Corrosion Sci. 38 (1996) 239.10.1016/0010-938X(96)00109-6 ↗
20. J. Overjero-Garcia, J. Mater. Sci. 20 (1985) 2623.10.1007/BF00556094 ↗
21. C. G. Mckamey, in “Physical Metallurgy and Processing of Intermetallic Compounds” (Chapman & Hall, New York, 1994) p. 351.
22. R. D. Mccright, Ph. D. Thesis, The Ohio State University, Columbus, OH, 1971.
23. J. Crank, in “The Mathematics of Diffusion” (Oxford University Press, Oxfrd, 1977) p. 44.
24. Y. Yang and S. Hanada, Scr. Metall. Mater. 32 (1995) 1719.10.1016/0956-716X(95)00020-V ↗