Physical properties of some iron based alloys in liquid and amorphous states
Source abstract
Abstract
The atomic structure and the physical properties of amorphous ribbons depend strongly on the state of the melt before quench. It is known that slightly above liquidus metallic melts can preserve a non-equilibrium metastable state for a long time. Moreover some structural transformations in liquid metallic alloys, similar to phase transitions in solids, may take place with an increase of the temperature. In this paper we report measurements of the viscosity, magnetic susceptibility and surface tension in some Fe-based melts. Amorphous ribbons of the same alloys were prepared by standard planar method from different states of the melt. The electrical resistivity, the kinetics of crystallization and the magnetic properties of the ribbons were investigated. It was found that the properties depending upon nanoscale inhomogeneities are different for ribbons produced after different heat treatments of the melt before quench. (C) 2000 Kluwer Academic Publishers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. V. P. Manov, S. I. Popel and P. I. Buler, Rasplavy (Melts) 1 (1989) 23 (in Russian).
2. V. P. Manov, S. I. Popel, P. I. Buler, A. B. Manukhin and D. G. Komlev, Mat. Sci. Eng. A133 (1991) 535.10.1016/0921-5093(91)90128-A ↗
3. P. S. Popel, O. A. Chikova and V. M. Matveev, High Temp. Mat. Proc. 14 (1995) 219.10.1515/HTMP.1995.14.4.219 ↗
4. P. S. Popel and V. E. Sidorov, Mat. Sci. Eng. A226-228 (1997) 237.10.1016/S0921-5093(96)10624-9 ↗
5. A. C. Mitus and A. Z. Patashinski, Physica A150 (1988) 383.10.1016/0378-4371(88)90159-8 ↗
6. J. A. Knapp and D. M. Follstaedt, Phys. Rev. Lett. 58 (1987) 2454.10.1103/PhysRevLett.58.2454 ↗
7. R. Goswani and K. Chattopadhyay, Mat. Sci. Eng. A179/A180 (1994) 163.10.1016/0921-5093(94)90185-6 ↗
8. V. M. Barboi, Y. M. Glasman and G. I. Fuks, Coloidnyo Zhurnal USSR 32 (1970) 233.
9. P. S. Popel and B. Baum, Metally 5 (1986) 47 (in Russian).
10. P. S. Popel, V. E. Sidorov, M. Calvo-Dahlborg, U. Dahlborg, V. P. Manov, E. Brook-Levinson and V. Molokanov, submitted.
11. P. S. Popel, E. L. Arkhangelsky and V. V. Makejev, Vysokotemperaturnye Rasplavy (High Temperature Melts) 1 (1995) 85 (in Russian).
12. V. V. Makejev and P. S. Popel, Zh. Phys. Chim. (USSR) 64 (1990) 568.
13. V. E. Sidorov, P. S. Popel, L. Son and L. Malyshev, Mat. Sci. Eng. A226-228 (1997) 317.10.1016/S0921-5093(97)80045-7 ↗
14. M. Calvo-Dahlborg, ibid. 226-228 (1997) 833.10.1016/S0921-5093(97)80087-1 ↗
15. U. Dahlborg and M. Calvo-Dahlborg, in Proc. Int. Workshop on Mechanical Properties of Metallic Glasses, 22-24 Sept. 1998, Kosice, Slovakia, p. 17.
16. U. Dahlborg, M. Calvo-Dahlborg, R. K. Heenan, J. M. Ruppert, P. S. Popel and V. E. Sidorov, submitted.
17. M. Calvo-Dahlborg and J. M. Ruppert, in Proc. Int. Workshop on Mechanical Properties of Metallic Glasses, 22-24 Sept. 1998, Kosice, Slovakia, p. 9.
18. U. KÖster, in “Phase Transformations in Crystalline and Amorphous Alloys,” edited by B. L. Mordike (DGM, 1982) p. 113.
19. W. Hofstetter, H. Sassik, R. GrÖssinger, R. Trausmuth, G. Vertesy and L. F. Kiss, Mat. Sci. Eng. A226-228 (1997) 213.10.1016/S0921-5093(96)10620-1 ↗
20. K. Dehghan, J. M. Dubois, G. LecaËr and C. TÊte, J. Non-Cryst. Solids 65 (1984) 87.10.1016/0022-3093(84)90357-0 ↗
21. M. Arshed, M. Siddique, M. Anwar-Ul-Islam and N. M. Butt, Solid State Comm. 89 (1994) 101.10.1016/0038-1098(94)90384-0 ↗