Dielectric permittivity and loss of hydroxyapatite screen-printed thick films
Source abstract
Abstract
In this paper we did a study on the structural and electrical properties of bioceramic hydroxiapatite (HA) thick films. The films were prepared in two layers using the screen printing technique on Al2O3substrates. Mechanical alloying has been used successfully to produce nanocrystalline powders of hydroxyapatite (HA) to be used in the films. We also look for the effect of the grain size of the HA in the final properties of the film. The samples were studied using X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and electric measurements. We did a study of the dielectric permittivity and the loss of the films in the radio-frequency of the spectra. The X-ray diffraction (XRD) patterns of the films indicates that all the peaks associated to HA phase is present in the films. One can notice that, for all the films there is a decrease of the DC with the increase of the frequency. The values of the dielectric constant of the films are in between 4 and 9 (at 1 KHz), as a function of the flux material concentration. The loss is decreasing as we increase the frequency for all the films. These results strongly suggests that the screen-printing HA thick films are good candidates for applications in biocompatible coatings of implant materials but also for the insulating materials of electronic circuits and dielectric layer in bio-sensors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. C. Laverniaand J. M. Schoenung, Bull. Amer. Ceram. Soc. Ceram. Bull. 70(1991) 95.
2. V. Sergo, O. Sbaizeroand D. R. Clarke, Biomaterials 18(1997) 477.10.1016/S0142-9612(96)00147-0 ↗
3. B. R. Constantz, I. C. Ison, M. T. Fulmer et al., Science 267(1995) 1796.10.1126/science.7892603 ↗
4. M. J. Yaszemsk et al., Biomaterials 17(1996) 175.10.1016/0142-9612(96)85762-0 ↗
5. H. S Liu et al., Ceramics International 23(1997) 19.10.1016/0272-8842(95)00135-2 ↗
6. G. Felicio Fernandes et al., Quimica Nova 23(2000) 441.10.1590/S0100-40422000000400002 ↗
7. G. Heimke, Angew. Chem. 101(1989) 111.10.1002/ange.19891010141 ↗
8. L. L. Hench, J. Amer. Ceram. Soc. 74(1991) 1487.10.1111/j.1151-2916.1991.tb07132.x ↗
9. M. R. Bet et al., Quimica Nova 20(1997) 475.10.1590/S0100-40421997000500006 ↗
10. P. Ducheyne et al., Biomaterials 11(1990) 244.10.1016/0142-9612(90)90005-B ↗
11. M. Wei et al., J. Biomed. Mater. Res. 45(1999) 11.10.1002/(SICI)1097-4636(199904)45:1<11::AID-JBM2>3.0.CO;2-7 ↗
12. S. Ban et al., Jpn. J. Appl. Phys. Part 2, Lett. 32(10B) (1993) 1577.10.1143/JJAP.32.L1577 ↗
13. C. M. Cotell, Appl. Surf. Sci. 69(1993) 140.10.1016/0169-4332(93)90495-W ↗
14. L. Torrisi et al., Appl. Phys. Lett. 62(1993) 237.10.1063/1.108976 ↗
15. L. D. Piveteau et al., J. Mater. Sci. Mater. Med. 10(1999) 161.10.1023/A:1008985423644 ↗
16. T. Brendel et al., ibid. 3(1992) 175.10.1007/BF00713445 ↗
17. E. Ruckenstein et al., J. Colloid Interface Sci. 63(1983) 245.10.1016/0021-9797(83)90026-7 ↗
18. C. M. Cotell et al., J. Appl. Biomat. 3(1992) 87.10.1002/jab.770030204 ↗
19. R. K. Singh et al., Biomaterials 15(1993) 522.10.1016/0142-9612(94)90018-3 ↗
20. R. S. de Figueiredo, A. Messai, A. C. Hernandesand A. S. B. Sombra, J. Mater. Sci. Lett. 17(1998) 449.10.1023/A:1006563924005 ↗
21. I. F. Vasconcelos et al., ibid. 18(1999) 1871.10.1023/A:1006624011824 ↗
22. I. F. Vasconcelos, ibid. 36(2001) 587.
23. M. N. Taravel, Biomaterials 16(11) (1995) 865.10.1016/0142-9612(95)94149-F ↗
24. S. Hontsu et al., Thin Solid Films 295(1997) 214.10.1016/S0040-6090(96)09146-8 ↗
25. D. M. Liu et al., Biomaterials 23(2002) 691.10.1016/S0142-9612(01)00157-0 ↗
26. A. J. Moulsonand J. M. Herbert, “Electroceramics” (Chapman and Hall, 1990).