journal article·2006-08

Preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions

Qilin Cheng, Ying He, Vladimir Pavlinek, Anezka Lengalova, Chunzhong Li, Petr Saha

Journal of Materials Science· Volume 41· Issue 15
Publisher page

Abstract

Encapsulation or self-assembly of conducting polymer within the channels of mesoporous silica is one of the ways to prepare new nanostructured materials [1]. The resulting materials may have unique nanostructures and properties controlled by host-guest interactions, as well as new potential applications, such as in nano-scale electronic, optical devices [2] and electrorheological (ER) fluids [3]. For example, stabilization of conducting polyaniline filaments with mobile charge carriers in mesoporous silica (MCM-41) represents a step toward the design of nanometer electronic devices [4]. In this area, Qiu [5] et al. found the impedance of polyaniline/SBA-15 (SBA-15 is another kind of mesoporous silica with larger pore size and thicker pore wall compared to MCM-41) composites more sensitive to humidity than that of bulk polyaniline, and Choi et al. [3] reported a composite material with conducting polyaniline in MCM-41 channels showing interesting ER properties. Of conducting polymers, polypyrrole (PPy) as a promising conducting polymer has been widely studied because of its high polarizability, superior conductivity and electrorheological properties [6, 7]. Accordingly, incorporation of PPy in the pores of mesoporous silica is worth investigating, as it can be beneficial for further exploring electronic characteristics and applications of the resultant composite. On the other hand, ER fluids as one of the most promising smart materials for potential industrial applications have received wide interest. Recently, many studies on dry-based ER fluids have been reported, for example, polyaniline/BaTiO3 [8], polypyrrole/clay [9], polyaniline/clay [10] and polyaniline/MCM-41 [11] particles have been adopted as the dispersed phase of ER fluids. In this work, a new type of anhydrous ER material based on conducting polypyrrole confined in MCM-41 channels was prepared and its ER behavior was also investigated for the first time. The preparation of mesoporous silica (MCM41) followed the method described in literature [12]. To synthesize PPy/MCM-41 nanocomposite, the calcined MCM-41 was vacuumed at 200 C for 4 h to remove air and water from the channels. Then the MCM-41 host was suspended above the pyrrole monomer in a flask under vacuum at room temperature for 24 h. The MCM-41 containing pyrrole was immersed in an aqueous solution of FeCl3 AE 6H2O with continuous stirring in an ice bath for 24 h. The PPy/MCM-41 was washed with de-ionized water and acetone, and dried at 40 C under vacuum. For ER behavior investigation, the PPy/MCM-41 particles were further dried at 120 C and dispersed in silicone oil to form 10 wt.% suspension. Schematic of the synthesis of PPy/MCM-41 nanocomposite and ER tests are shown in Fig. 1. FT-IR spectra were obtained on Nicolet Magna-550 spectrometer. N2 adsorption/desorption isotherms were measured using Micromeritics ASAP 2010 system. High resolution transmission electron micrographs (HRTEM) were taken on a JEM 2100 F electron microscope. Scanning electron microscopy (SEM) was conducted on a JEOL JSM-6360 LV electron microscope. Measurements Q. Cheng AE Y. He AE C. Li Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, 200237 Shanghai, China
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Mesoporous Materials and Catalysis · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
2. Nguyen T, Wu J, Doan V, Schwartz BJ, Tolbert SH (2000) Science 288:65210.1126/science.288.5466.652 ↗
3. Cho MS, Choi HJ, Ahn WS (2004) Langmuir 20:20210.1021/la035051z ↗
4. Wu CG, Bein T (1994) Science 264:175710.1126/science.264.5166.1757 ↗
5. Li N, Li XT, Geng WC, Zhang T, Zuo Y, Qiu SL (2004) J Appl Polym Sci 93:159710.1002/app.20586 ↗
6. Kim YD, Song IC (2002) J Mater Sci 37:501
7. Kim YD, Park DH, (2004) Synth Met 142:14710.1016/j.synthmet.2003.08.005 ↗
8. Wei JH, Shi J, Guan JG, Yuan RZ (2004) J Mater Sci 39:345710.1023/B:JMSC.0000026950.09067.84 ↗
9. Kim JW, Liu F, Choi HJ, Hong SH, Joo J (2003) Polymer 44:28910.1016/S0032-3861(02)00749-8 ↗
10. Park JH, Lim YT, Park OO (2001) Macromol Rapid Commun 22:61610.1002/1521-3927(20010501)22:8<616::AID-MARC616>3.0.CO;2-# ↗
11. Choi HJ, Cho MS, Ahn WS (2003) Synth Met 135–136:71110.1016/S0379-6779(02)00806-8 ↗
12. Huo Q, Margolese DI, Clesla U, Demuth DG, Feng P, Gier TE, Sieger P, Leon R, Schuth F, Stucky GD (1994) Nature 378:31710.1038/368317a0 ↗
13. Jang J, Oh JH, Stuck GD (2002) Angew Chem Int Ed 41:401610.1002/1521-3773(20021104)41:21<4016::AID-ANIE4016>3.0.CO;2-G ↗
14. Jang J, Yoon H (2003) Adv Mater 15:208810.1002/adma.200305296 ↗
15. Branton PJ, Hall PG, Sing KSW, Reichert H, Schuth F, Unger KK (1994) J Chem Soc, Faraday Trans 90:296510.1039/FT9949002965 ↗