Effect of processing parameters on the particle size and stabilisation of titania sols
Source abstract
Abstract
A systematic analysis of the main parameters affecting the characteristics of titania sols for photocatalytic applications prepared from the hydrolysis of titanium i-propoxide (TIP) is presented. Stable monomodal sols were obtained at peptization temperatures between 50∘C and 70∘C, for water/alkoxide molar ratios ranging from 250 to 1000 and acid/alkoxide molar ratios ranging from 0.4 to 0.7. Unstable sols with bimodal distributions were obtained at higher peptization temperatures. The peptization temperature was the parameter with the greatest influence, followed by acid concentration, whereas the water/alkoxide ratio showed little influence. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to verify the primary particle size as measured by photon correlation spectroscopy (PCS). The observations are explained using the Derjaguin, Landau, Verwey and Overbeek (DLVO) theory on suspension stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Polyoxometalates: Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A. FUJISHIMA, J. HASHIMOTO and T. WATANABE, in “TiO2 Photocatalysis, Fundamentals and Applications”, (BKC, Inc., Tokyo, 1999).
2. K. SUNADA, Y. KIKUCHI, K. HASHIMOTO and A. FUJISHIMA, Environ. Sci. Technol 32(5) (1998) 726.10.1021/es970860o ↗
3. Y. MASAKI and T. YAO, Photocatalysis of TiO2 Films Supported on Stainless-Steel Prepared by Sol-gel Method, Eco Materials Conference, 1997.
4. H. MALLOY, Ceramic Industry 149(10) (1999) 37.
5. K. KATO, Bull. Chem. Soc. Jpn. 65 (1992) 34.10.1246/bcsj.65.34 ↗
6. E. BARRINGER and H. BOWEN, Langmuir 1 (1985) 414.10.1021/la00064a005 ↗
7. B. E. YOLDAS, J. Mater. Sci. 21 (1986) 1087.10.1007/BF01117399 ↗
8. L. SHI, N. B. WONG, K. C. TIN and C. Y. CHUNG, J. Mater. Sci. Lett. 16 (1997) 1284.10.1023/A:1018579009274 ↗
9. J. L. LOOK and C. F. ZUKOSKI, J. Am. Ceram. Soc. 75(6) (1992) 1587.10.1111/j.1151-2916.1992.tb04230.x ↗
10. E. BARRINGER and H. BOWEN, Langmuir, 1 (1985) 420.10.1021/la00064a006 ↗
11. D. VORKAPIC and T. MATSOUKAS, J. Am. Ceram. Soc. 81(11) (1998) 2815.10.1111/j.1151-2916.1998.tb02701.x ↗
12. Q. XU, M. J. GIESELMANN and M. A. ANDERSON, Polym. Mater. Sci. Eng. 61 (1989) 889.
13. A. FERNANDEZ, G. LASSALETTA, V. M. JIMENEZ, A. JUSTO, A. R. GONZALEZ-FELIPE, M. HERRMANN, H. TAHIRI and Y. AIT-ICHOU, Appl. Catal. B 7 (1995) 49.10.1016/0926-3373(95)00026-7 ↗
14. Internet Source: http://www.scioncorp.com.
15. W. WOOK-SO, S. BIN-PARK, K. JE-KIM, C. HO-SHIN and S. JIN-MOON, J. Mater. Sci. 36 (2001) 4299.10.1023/A:1017955408308 ↗
16. T. L. HANLEY, V. LUCA, I. PICKERING and R. F. HOWE, J. Phys. Chem. B 106 (2002) 1153.10.1021/jp012225h ↗
17. A. JILLAVENKATESA, S. J. DAPKUNAS and L. S. LUM, in “Particle Size Characterization” (NIST Special Publication 960-1, US Government Printing Office, 2001) p. 69.
18. K. KATO, Ceram. Trans. 22 (1991) 63.