journal article·2007-10

Commingled yarns of surface nanostructured glass and polypropylene filaments for effective composite properties

Edith Mäder, Christina Rothe, Shang-Lin Gao

Journal of Materials Science· Volume 42· Issue 19
Publisher page

Abstract

Developing commingled yarn technologies and understanding the fundamental interface nanostructures of reinforcement and thermoplastic filaments are of significant current interest. Previous research on commingled yarns was mainly focused on the air-jet texturing process, while the mechanical properties of the composites are strongly influenced by the impregnation homogeneity, the polymer sizing properties and consolidation process. Here, we report a unique melt spinning equipment for E-glass fiber which is compatibly combined with a melt spinning extruder to manufacture commingled yarns. The in-situ commingling enables to combine homogeneously both glass and polypropylene filament arrays in one processing step and without fiber damage compared to commingling by air texturing. Variation of processing conditions are investigated, i.e. sizings, diameter ratios, and arrangements of sizing/finish application related to intermingling of filament arrays. A rapid processing is achieved because of good intermingling and the low flow paths. We found that the sizing enables a good strand integrity with the polypropylene yarn. The interfacial adhesion can be improved with a sizing for glass fibers consisting of aminosilane and maleic anhydride grafted polypropylene film former, which results in both improved transverse tensile strength and compression shear strength. We also found that a very small amount of single-wall carbon nanotubes (SWNTs) in the sizing provides significantly improved interfacial adhesion strength. This is attributed to the change in fracture behavior of the nano-structured interface and morphology of the model single-fiber composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Fiber-reinforced polymer composites · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Svensson N, Shishoo R (1998) J Thermoplastic Compos Mater 11:2210.1177/089270579801100102 ↗
2. Ruan XP, Chou TW (1996) Comp Sci Technol 56:19810.1016/S0266-3538(96)00097-8 ↗
3. http://www.tu-dresden.de/mw/ilk/sfb639/sfb_en.html
4. Wakeman MD, Cain TA, Rudd CD (1998) Comp Sci Technol 58:187910.1016/S0266-3538(98)00011-6 ↗
5. Alagirusamy R (2004) J Ind Textiles 33:22310.1177/1528083704044360 ↗
6. Hamada H, Maekawa Z, Ikegawa N, Matsuo T (1993) Polym Compos 14:30810.1002/pc.750140406 ↗
7. Ye L, Friedrich K (1993) Comp Sci Technol 46:18710.1016/0266-3538(93)90174-F ↗
8. Ye L, Friedrich K (1993) J Mater Sci 28:773 DOI: 10.1007/BF0115125510.1007/BF01151255 ↗
9. Mäder E, Bunzel U, Schemme M (1994) Chemiefasern/Textilindustrie 37:11
10. Offermann P, Wulfhorst B, Mäder E (1995) Technische Textilien/Technical Textiles 38:55
11. Shonaike GO, Hamada H, Maekawa Z (1996) J Thermoplastic Compos Mater 9:7610.1177/089270579600900106 ↗
12. Stumpf H, Mäder E, Baeten S, Pisanikovski T, Zäh W, Eng K, Andersson CH, Verpoest I, Schulte K (1998) Composites/Part A 29:151110.1016/S1359-835X(98)00086-4 ↗
13. Mäder E, Skop-Cardarella K (1997) Key Eng Mater 137:2410.4028/www.scientific.net/KEM.137.24 ↗
14. Bogoeva-Gaceva G, Mäder E, Queck H (2000) J Thermoplastic Compos Mater 13:36310.1106/N35Y-1NJM-3FWC-A5IX ↗
15. Long AC, Wilks CE, Rudd CD (2001) Comp Sci Technol 61:159110.1016/S0266-3538(01)00059-8 ↗
16. Vendramini J, Bas C, Merle G (2000) Polym Compos 21:72410.1002/pc.10226 ↗
17. Bernet N, Michaud V, Bourban PE, Manson JAE (2001) Composites Part A 32:161310.1016/S1359-835X(00)00180-9 ↗
18. Putnoki I, Moos E, Karger-Kocsis J (1999) Plastics, Rubber Compos 28:4010.1179/146580199322913313 ↗
19. Lariviere D, Krawczak P, Tiberi C, Lucas P (2005) Polym Polym Compos 13:27
20. Gao SL, Mäder E (2002) Composites/Part A 33:55910.1016/S1359-835X(01)00134-8 ↗
21. Tong L, Mouritz AP, Bannister M (2002) 3D fibre reinforced polymer composites. Elsevier Science, Oxford10.1016/B978-008043938-9/50020-X ↗
22. Gao SL, Mäder E, Plonka R (2007) Acta Mater 55:104310.1016/j.actamat.2006.09.020 ↗
23. Report Aif-Nr. 322d (1993) Report Aif-Nr. 10039 B (1996) Report Aif-Nr. 11644b (2000) Leibniz-Institut Für Polymerforschung Dresden e.V
24. Online.Hybridgarnspinnen Von Glasfaser- Und Thermoplastfilamenten (2005) Jahresbericht Leibniz-Institut Für Polymerforschung Dresden e.V., p 64
25. Weibull W (1951) J Appl Mech 18:29310.1115/1.4010337 ↗
26. Zhandarov S, Pisanova E, Mäder E (2000) Compos Interface 7:14910.1163/156855400300185289 ↗
27. Nairn JA (2000) Adv Compos Lett 9:37310.1177/096369350000900601 ↗
28. Kaw AK (2006) Mechanics of composite materials, 2nd edn. ISBN: 0–8493–1343–0, Crc Press
29. Mäder E, Rothe C, Liu JW (2005) Proc Technomer. Chemnitz, p 39 (CD-ROM: 1–15)
30. Gojny FH, Wichmann MHG, Fiedler B et al (2005) Comp Sci Technol 65:230010.1016/j.compscitech.2005.04.021 ↗