journal article·2000-05

The abrasive corrosion behavior of plasma-nitrided alloy steels in chloride environments

C. K. Lee, H. C. Shih

Journal of Materials Science· Volume 35· Issue 9
Publisher page

Abstract

Both corrosion and abrasive corrosion behavior of plama-nitrided type 304 and 410 stainless steels and 4140 low alloy steel were investigated in 3% NaCl solution (pH = 6.8) by electrochemical corrosion measurements. Surface morphology and alloying elements after corrosion and abrasion corrosion tests were examined by scanning electron microscopy and energy dispersive analysis of X-rays. The results indicated that the plasma-nitrided SAE 4140 steel containing ∈-(Fe,Cr)2 − 3N and γ′-(Fe,Cr)4N surface nitrides which produce a thick and dense protective layer exhibited a significant decrease of corrosion currents by inhibition of the anodic dissolution of iron, whereas the plasma-nitrided type 304 and 410 stainless steels containing the segregation of chromium nitride CrN exhibited a extensive pitting corrosion by acceleration of the anodic dissolution of iron. It is concluded that the susceptibility to pitting is consistent with the degree of chromium segregation, and decreases as follows: 304 stainless steel > 410 stainless steel > 4140 steel. Also, the results of abrasive corrosion testing for the plasma-nitrided alloys are strongly related to the subtleties of the nitrided microstructures resulting in a pitting and spalling type of abrasive corrosion of type 304 and 410 stainless steels, and excellent abrasive corrosion resistance for SAE 4140 steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. “Metals Handbook, Vol.4,” 9th ed. (American Society for Metals, Metals Park, OH, 1981) p. 191.
2. B. Edenhofer, Heat Treat. Met. 1 (1974) 23 and 59.
3. H. Hong, R. F. Hochman and T. F. J. Quinn, “Surface Modifications and Coatings,” (ASM, Metals Park, Ohio, 1986) p. 455.
4. H. Hong, W. B. Carter and R. F. Hochman, Corrosion 44 (1988) 611.10.5006/1.3584973 ↗
5. W. C. Oliver, R. Hutchings and J. B. Pethia, Met. Trans. A 15 (1985) 2221.10.1007/BF02647105 ↗
6. V. G. Revenko, G. P. Chernova and V. V. Parshutin, Zashchita Metallov 24 (1988), 204.
7. K. Ibendorf and W. Schroter, Surf. Eng. 4 (1988) 327.10.1179/sur.1988.4.4.327 ↗
8. L. Fedrizzi, L. Guzman, E. Miglio, G. Cerisola and P. L. Bonora, Surf. Coat. Technol. 35 (1988) 221.10.1016/0257-8972(88)90037-0 ↗
9. K. Osozawa and N. Okato, “Passivity and its Breakdown on Iron and Iron Based Alloys,” (NACE, Houston, TX, 1976) p. 135.
10. J. E. Truman, M. J. Coleman and K. R. Pirt, Brit. Corros. J. 12 (1977) 236.10.1179/000705977798318973 ↗
11. Y. C. Lu, R. Banday, C. R. Clayton and R. C. Newman, J. Electrochem. Soc. 130 (1983) 1774.10.1149/1.2120091 ↗
12. U. KAMACHI Mudali, R. K. Dayal, T. P. S. Gill and J. B. Gnanamoorthy, Werkst. Korros. 37 (1986) 637.10.1002/maco.19860371206 ↗
13. R. C. Newman and T. Shahrabi, Corros. Sci. 27 (1987) 827.10.1016/0010-938X(87)90040-0 ↗
14. H. C. F. Rozendaal, P. F. Colijn and E. J. Mittemeijer, Surf. Eng. 1 (1985) 30.10.1179/sur.1985.1.1.30 ↗
15. R. Beneke and R. F. Sandenbergh, Corros. Sci. 29 (1989) 543.10.1016/0010-938X(89)90006-1 ↗
16. S. D. Chyou and H. C. Shih, Mater. Sci. Eng. A129 (1990) 109.10.1016/0921-5093(90)90349-8 ↗
17. H. C. Shih Idem., Corrosion 47 (1991) 31.10.5006/1.3585216 ↗
18. M. R. Nair, S. Venkatraman, D. C. Kothari, K. B. Lai and R. Raman, Nucl.Instrum. Methods B 34 (1988) 53.10.1016/0168-583X(88)90364-3 ↗
19. M. E. Chabica, D. L. Williamson, R. Wei and P. J. Wilbur, Surf. Coat. Technol. 51 (1992) 24.10.1016/0257-8972(92)90209-S ↗
20. O. T. Inal and C. V. Robin, Thin Solid Films 95 (1982) 195.10.1016/0040-6090(82)90242-5 ↗
21. S. Mridha and D. H. Jack, Met. Sci. 16 (1982) 398.10.1179/msc.1982.16.8.398 ↗
22. O. Kubaschewski and C. B. Alcock, “Metallurgical Thermochemistry,” (Pergamon, London, 1979).
23. B. Billon and A. Hendry, Surf. Eng. 1 (1985) 114.10.1179/sur.1985.1.2.114 ↗
24. J. P. Lebrun, H. Michel and M. Gentois, Mem. Sci. Rev. Metall. 69 (1972) 727.
25. E. J. Mittemeijer, A. B. P. Vogels and P. J. Van Der Schaff, J. Mater. Sci. 5 (1981) 3129.
26. V. S. Agarwala, K. Y. Kim and S. Bhattacharyya, “Materials Evaluation Under Fretting Conditions,” ASTM STP 780 (ASTM, Philadelphia, 1982) p. 106.10.1520/STP29399S ↗
27. S. M. El-Rahgy, H. Abd-El-Kader and M. E. Abou-El-Hassan, Corrosion 40 (1984) 60.10.5006/1.3593916 ↗
28. Y. C. Lu, J. L. Luo and M. B. Ives, ibid. 47 (1991) 835.10.5006/1.3585195 ↗
29. R. J. Brision and R. A. Campbell, Trans. ASME/AIME 245 (1973) 239.
30. F. H. Stott, J. E. Breakell and R. C. Newman, Corros. Sci. 30 (1990) 813.10.1016/0010-938X(90)90005-P ↗
31. H. Adb-El-Kader and S. M. El-Raghy, ibid. 26(8) (1986) 647.10.1016/0010-938X(86)90029-6 ↗
32. M. G. Fontana and N. D. Greene, “Corrosion Engineering,” 3rd ed. (McGraw-Hill, New York, 1986), p. 73.
33. J. Postlehwaite and N. W. Hawrylak, Corrosion, 31 (1975) 237.10.5006/0010-9312-31.7.237 ↗