EPS molecular weight and foam density effects in the lost foam process
Source abstract
Abstract
The effects of pattern molecular weight and density on casting formation in the lost foam process have been studied. The tensile properties of injection molded ASTM D638 tensile rods have been measured for various densities and molecular weights. Thermogravimetry, differential scanning calorimetry and other techniques have been used to study the thermal degradation characteristics of the pattern. A thermometric technique has been used to study the mold filling behavior with aluminum alloy A356. The results indicate that the tensile properties in the foam generally improve with increasing molecular weight and density. The structural characteristics of the foam may have a greater influence on mechanical properties than molecular weight. The rate of volatilization of the polymer increases as the weight average molecular weight, M w, is lowered from 304,000 g/mol to 152,000 g/mol. The mold fill time increases with pattern density and M w. The data suggest that pattern density and molecular weight may have a significant effect on the quality of the casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Foaming and Composites · Injection Molding Process and Properties · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. E. H. Niemann, AFS Trans. 95 (1988) 793.
2. S. Shivkumar and X. Yao, Scr. Metall. Mater. 33 (1995) 39.10.1016/0956-716X(95)00146-M ↗
3. L. Bu, Y. Wan, H. Littleton and J. Mays, Ameri. Chem. Soc., Polym. Prep. 40(2) (1999) 689.
4. D. Klempner and K. Frisch, “Handbook of Polymeric Foams and Foam Technology” (Hanser Publishers, New York, 1991).
5. T. Faravelli, M. Pinciroli, F. Pisano, G. Bozzano, M. Dente and E. Ranzi, J. Anal. Appl. Pyrolysis 60 (2001) 103.10.1016/S0165-2370(00)00159-5 ↗
6. J. Rossacci and S. Shivkumar, J. Mater. Sci. 38(2) (2003) 201.10.1023/A:1021180608531 ↗
7. M. Sands, M.S. thesis, Worcester Polytechnic Institute, Worcester, MA, 1998.
8. N. Nakano and S. Hasegawa, J. Soc. Mater. Sci. Jpn. 33 (1984) 1206.10.2472/jsms.33.1206 ↗
9. G. Xue, Y. Lu, G. Shi and Q. Dai, Polymer. 35 (1994) 892.10.1016/0032-3861(94)90894-X ↗
10. P. J. Flory, J. Amer. Chem. Soc. 67 (1945) 2048.10.1021/ja01227a506 ↗
11. B. H. Bersted and T. G. Anderson, J. Appl. Polym. Sci. 39 (1990) 499.10.1002/app.1990.070390302 ↗
12. J. F. Fellers and T. F. Chapman, ibid. 22 (1978) 1029.10.1002/app.1978.070220414 ↗
13. L. J. Gibson and M. F. Ashby, “Cellular Solids,” (Cambridge University Press, Cambridge, 1997).10.1017/CBO9781139878326 ↗
14. L. Di Landro, G. Sala and D. Olivieri, Polym. Test. 21 (2002) 217.10.1016/S0142-9418(01)00073-3 ↗
15. F. Ramsteiner, N. Fell and S. Forster, ibid. 20 (2001) 661.10.1016/S0142-9418(00)00090-8 ↗
16. P. Jarvela, J. Sarlin, P. Jarvela and P. Tormala, J. Mater. Sci. 20 (1986) 3139.10.1007/BF00553348 ↗
17. P. R. Stupak, W. O. Frye and J. A. Donovan, J. Cell. Plast. 27 (1991) 484.10.1177/0021955X9102700503 ↗
18. P. R. Stupak, W. Russell and J. A. Donovan, “Microstructural Science,” Vol. 18, edited by T. A. Place, J. D. Braun, W. E. White and G. F. Vander Voort (1990) 505.
19. C. Stafford, T. P. Russell and T. J. Mccarthy, Macromolecules 32 (1999) 7610.10.1021/ma9902100 ↗
20. T. Fen-Chong, E. Herve and A. Zaoui, Eur. J. Mech. A/Solids 18 (1999) 201.10.1016/S0997-7538(99)80012-6 ↗
21. P. A. Berman, Z Metallkd. 29 (1973) 31.
22. S. L. Madorsky, “Thermal Degradation of Organic Polymers,” (Interscience Publishers, New York, 1964).
23. C. Bouster, P. Vermande and J. Veron, J. Anal. Appl. Pyrolysis. 15 (1989) 249.10.1016/0165-2370(89)85038-7 ↗
24. I. C. McNeil, M. Zulfiquar and T. Kousar, Polym. Degradation. Stab. 28 (1990) 131.10.1016/0141-3910(90)90002-O ↗
25. M. R. Nyden, T. R. Coley and S. Mumby, Polym. Eng. Sci. 37 (1997) 1496.10.1002/pen.11798 ↗
26. P. T. Williams and E. A. Williams, Environ. Tech. 20 (1999) 1109.10.1080/09593332008616908 ↗
27. M. T. Sousa Pessoa de Amorim, C. Bouster, P. Vermande and J. Veron, J. Anal. Appl. Pyrolysis. 3 (1981) 19.10.1016/0165-2370(81)80023-X ↗
28. A. Karaduman, E. H. Simsek, B. Cicek and A. Y. Bilgesu, ibid. 60 (2001) 179.10.1016/S0165-2370(00)00169-8 ↗
29. M. Yang and Y. Shibaski, J. Polym. Sci. Part A 36 (1998) 2315.10.1002/(SICI)1099-0518(19980930)36:13<2315::AID-POLA19>3.0.CO;2-D ↗
30. L. Dean, S. Groves, R. Hancox, G. Lamb and R. S. Lehrle, Polym. Degradation Stab 25 (1989) 143.10.1016/S0141-3910(89)81005-5 ↗
31. H. Ohtani, T. Yuyama, S. Tsuge, B. Plage and R. H. Schulten, Eur. Polym. J. 26 (1990) 893.10.1016/0014-3057(90)90164-Y ↗
32. P. L. Beltrame, L. Bergamasco, P. Carniti, A. Castelli, F. Bertini and G. Audisio, J. Anal. Appl. Pyrolysis. 40/41 (1997) 451.10.1016/S0165-2370(96)00977-1 ↗
33. J. Krstina, G. Moad and D. Solomon, Eur. Polym. J. 25 (1989) 767.10.1016/0014-3057(89)90043-8 ↗
34. G. Madras, G. Y. Chung, J. M. Smith and B. J. Mccoy, Ind. Eng. Chem. Res. 36 (1997) 2019.10.1021/ie9607513 ↗
35. D. Dong, S. Tasaka and N. Inagaki, Polym. Degradation. Stab. 72 (2001) 345.10.1016/S0141-3910(01)00031-3 ↗
36. T. Sawaguchi and M. Seno, J. Polym. Sci. Part A 36 (1998) 209.10.1002/(SICI)1099-0518(19980115)36:1<209::AID-POLA26>3.0.CO;2-M ↗
37. M. Swistek, N. B. Ismail and D. Nicole, Polym. Recyc. 3 (1997/98) 67.
38. D. Daoust, S. Borman, R. Legras and J. P. Mercier, Polym. Eng. Sci. 21 (1981) 721.10.1002/pen.760211116 ↗
39. M. Guaita, Br. Polym. J. 18 (1985) 226.10.1002/pi.4980180405 ↗
40. J. Rieger, J. Therm. Anal. 46(3/4) (1996) 965.10.1007/BF01983614 ↗
41. L. H. Sperling, “Introduction to Physical Polymer Science,” 2nd ed. (John Wiley & Sons, Inc., New York, 1992).
42. S. Mehta, M. S. thesis, Worcester Polytechnic Institute, Worcester, MA, 1992.
43. S. Shivkumar and B. Gallois, Trans. AFS. 95 (1987) 801.
44. Z. Dolezal, V. Pacakova and J. Kovarova, J. Anal. Appl. Pyrolysis. 57 (2001) 177.10.1016/S0165-2370(00)00107-8 ↗
45. V. V. Zuev, F. Bertini and G. Audisio, Polym. Degradation. Stab. 71 (2001) 213.10.1016/S0141-3910(00)00113-0 ↗
46. O. S. Woo, T. M. Kruse and L. J. Broadbelt, ibid. 70 (2000) 155.10.1016/S0141-3910(00)00101-4 ↗
47. G. Bertelli, ibid. 20 (1988) 271.10.1016/0141-3910(88)90074-2 ↗
48. S. Bakhtiyarov and R. Overfelt, J. Elastomers Plast. 32 (2000) 73.10.1177/009524430003200106 ↗
49. E. N. Pan and K. Y. Liao, J. Chin. Soc. Mech. Eng. Trans. Chin. Inst. Eng. Ser. C 21 (2000) 283.
50. Q. Chen and C. Ravindran, J. Mater. Eng. Perform. 9 (2000) 386.10.1361/105994900770345773 ↗