journal article·2004-07

On brittle fracture in polycrystalline iridium

P. Panfilov, A. Yermakov

Journal of Materials Science· Volume 39· Issue 14
Publisher page

Abstract

The brittle intercrystalline fracture (BIF) in iridium and low plasticity of this refractory fcc-metal in polycrystalline state for wide temperature range, give occasion to supposition that a metal having fcc lattice can be brittle substance like silicon due to specific features of interatomic bonds. On the other hand, experience has shown that such behavior of fcc-metal should be impurity induced effect. High plasticity of iridium single crystals (by means of octahedral slip), which however cleave under tension, does not support idea on “classic” inherent brittleness of this metal. High sensibility of its mechanical properties to impurities (10 ppm is critical level for carbon!) has been severe restriction for experiments aimed to searching of inherent fracture mode for polycrystalline iridium. In present paper fracture behavior of high purity polycrystalline iridium and iridium, where grain boundaries (GBs) have been contaminated, are considered. Fine grained impurity-free metal exhibits 100% brittle transcrystalline fracture (BTF) and cracked GBs on the fracture surface and this is an inherent fracture mode of polycrystalline iridium. Re-crystallization in vacuum leads to appearance of BIF regions, whose total square can reach 100% of the fracture surface in coarse grain aggregates. Contaminated iridium mainly fails on grain boundaries, at that portion of BIF on the fracture surface (50 ÷ 100%) does not depend on grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. C. Gandhi and M. F. Ashby, Acta Metall. 27 (1979) 1565.10.1016/0001-6160(79)90042-7 ↗
2. W. K. Honeycombe, “The Plastic Deformation of Metals” (Edward Arnold, London, 1972).
3. B. L. Mordike and C. A. Brookes, Platinum Metals Rev. 4 (1960) 94.10.1595/003214060X439499 ↗
4. P. Haasen, H. Hieber and B. L. Mordike, Zt. Metallkde 56 (1965) 832.
5. G. Reinacher, Metall. 18 (1964) 731.
6. C. A. Brookes, J. H. Greenwood and J. L. Routbort, J. Appl. Phys. 39 (1968) 2391.10.1063/1.1656565 ↗
7. C. N. Reid and J. L. Routbort, Metall. Trans. 3 (1972) 2257.10.1007/BF02643240 ↗
8. C. A. Brookes, J. H. Greenwood and J. L. Routbort, Journal of Institute of Metals 98 (1970) 27.
9. J. R. Handley, Platinum Metals Rev. 30 (1986) 12.10.1595/003214086X3011213 ↗
10. S. S. Hecker, D. L. Rohr and D. F. Stein, Metall. Trans. 9A (1978) 481.10.1007/BF02646403 ↗
11. S. P. Chen, Phil. Mag. 66A(1) (1992) 1.10.1080/01418619208201509 ↗
12. N. Timofeev, A. Yermakov, V. Dmitriev and P. Panfilov, in “Metallurgy and Mechanical Behavior of Iridium” (Urals Branch of Russian Academy of Science, Ekaterinburg, 1996) p. 119 (in Russian).
13. A. Yermakov, P. Panfilov and R. Adamesku, J. Mater. Sci. Lett. 9 (1990) 696.10.1007/BF00721807 ↗
14. P. Panfilov and A. Yermakov, Platinum Metals Rev. 38(1) (1994) 12.10.1595/003214094X3811215 ↗
15. M. H. Kamdar, “Treatise on Materials Science and Technology. Embittlement of Engineering Alloys,” Vol. 25, edited by C. L. Briant and S. K. Banerji (Academic Press, 1983 in Russian, Moscow, “Metallurgia,” 1988) p. 333.
16. T. Yokobori, in “An Interdisciplinary Approach to Fracture and Strength of Solids” (Wolters-Noordhoff Scientific Publications, Groningen, 1971) p. 264 (in Russian).
17. J. F. Knott, “Fundamentals of Fracture Mechanics” (London, 1973) (in Russian: Metallurgia, Moscow).
18. P. Panfilov, A. Yermakov, V. Dmitriev and N. Timofeev, Platinum Metals Rev. 35 (1991) 196.10.1595/003214091X354196200 ↗
19. P. Panfilov, in “Iridium. Proceedings of the International Symposium Sponsored by the SMD Division of the Minerals, Metals & Materials Society (TMS) Held During the 2000 TMS Annual Meeting in Nashville, Tennessee, March 12–16, 2000,” edited by Evan K. Ohriner, Richard D. Lanam, Peter Panfilov, and Hiroshi Harada (Publication of TMS, USA, 2000) p. 93.
20. P. Panfilov, in “Iridium. Proceedings of the International Symposium Sponsored by the SMD Division of the Minerals, Metals & Materials Society (TMS) Held During the 2000 TMS Annual Meeting in Nashville, Tennessee, March 12–16, 2000,” edited by Evan K. Ohriner, Richard D. Lanam, Peter Panfilov, and Hiroshi Harada (Publication of TMS, USA, 2000) p. 27.
21. P. Panfilov, V. Novgorodov and A. Yermakov, J. Mater. Sci. Lett. 13 (1994) 137.10.1007/BF00416826 ↗
22. B. Fischer and D. F. Lupton, Private Communication, 1996.
23. P. Panfilov and A. Yermakov, Platinum Metals Rev. 45 (2001) 179.10.1595/003214001X454176178 ↗
24. Yu. N. Gornostyrev, O. N. Mryasov, A. J. Freeman, N. I. Medvedeva, M. I. Katsnelson and A. V. Trefilov, in “Iridium. Proceedings of the International Symposium Sponsored by the SMD Division of the Minerals, Metals & Materials Society (TMS) Held During the 2000 TMS Annual Meeting in Nashville, Tennessee, March 12–16, 2000,” edited by Evan K. Ohriner, Richard D. Lanam, Peter Panfilov, and Hiroshi Harada (Publication of TMS, USA, 2000) p. 137.
25. C. T. Liu, H. Inouye and A. C. Schaffhauser, Metall. Trans. 12A (1981) 993.10.1007/BF02643480 ↗
26. C. G. McKamey, E. P. George, E. H. Lee, E. K. Ohriner, L. Heatherly and J. W. Cohron, Scripta Mater. 42 (2000) 9.10.1016/S1359-6462(99)00339-5 ↗
27. L. Heaterly and E. P. George, Acta Mater. 49 (2001) 289.10.1016/S1359-6454(00)00313-X ↗