journal article·2007-09

Welding of Al-359/20%SiCp metal matrix composites by the novel MIG process with indirect electric arc (IEA)

Rafael García, Victor H. López, Andrew R. Kennedy, Gabriel Arias

Journal of Materials Science· Volume 42· Issue 18
Publisher page

Abstract

An Al-based composite reinforced with 20%SiCp was welded using the MIG welding process with direct and indirect application of the electric arc (DEA and IEA respectively). The welds were made on 12.5 mm thick plates in three welding passes for the DEA joint whereas only one pass was required for the IEA joint. Microstructural examination of the joints revealed DEA welds with light signs of matrix/reinforcement reaction whilst in the IEA welds the SiC particles remained with their initial angular morphology. Mechanical failure occurred consistently and independently of the type of joint in the weld zone and the measured strengths were 209 and 234 MPa for DEA and IEA welds respectively. The greater strength measured for the IEA weld was due to reduced porosity and good incorporation and dispersion of the SiC particles into the weld pool.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Miracle DB (2005) Compos Sci Technol 65:252610.1016/j.compscitech.2005.05.027 ↗
2. Ahearn JS, Cooke C, Fishman SG (1982) Met Constr 14:192
3. Lloyd DJ (1989) Compos Sci Technol 35:15910.1016/0266-3538(89)90093-6 ↗
4. Viala JC, Fortier P, Bouix J (1990) J Mater Sci 25:184210.1007/BF01045395 ↗
5. Viala JC, Bosselet F, Laurent V, Lepetitcorps Y (1993) J Mater Sci 28:530110.1007/BF00570081 ↗
6. Aksenov AA, Belov NA, Medvedeva SV (2001) Z Metallkd 92:1103
7. Lienert JT, Brandon ED, Lippold JC (1993) Scripta Metall Mater 28:134110.1016/0956-716X(93)90479-C ↗
8. Bonollo F, Tiziani A, Penasa M (2002) Int J Mater Product Technol 17:29110.1504/IJMPT.2002.001316 ↗
9. Ureña A, Escalera MD, Gil L (2000) Compos Sci Technol 60:61310.1016/S0266-3538(99)00168-2 ↗
10. Garcia R, Lopez VH, Bedolla E, Manzano A (2002) J Mater Sci Let 21:196510.1023/A:1021673000800 ↗
11. Garcia R, Lopez VH, Bedolla E, Manzano A (2003) J Mater Sci 38:277110.1023/A:1024471610718 ↗
12. Garcia R, Lopez VH (2006) J Mater Sci, https://doi.org/10.1007/s10853-006-1287-x10.1007/s10853-006-1287-x ↗
13. Natividad C, Salazar M, Garcia R, Gonzalez-Rodriguez JG, Perez R (2006) Corrosion Eng Sci Technol 41:9110.1179/174327806X93974 ↗
14. Altshuller B, Christy W, Wiskel B (1990) In: Patterson RA, Mahin KW (eds) Weldability of materials. ASM International, Detroit, Michigan, USA, 305 pp
15. Gowri S, Samuel FH (1992) Metall Trans A 23A:336910.1007/BF02663446 ↗