journal article·2006-02

Novel basalt fibre reinforced glass matrix composites

E. Bernardo, E. Stoll, A. R. Boccaccini

Journal of Materials Science· Volume 41· Issue 4
Publisher page

Abstract

A novel hot-pressing technique for the manufacturing of basalt fibre reinforced glass matrix composites was investigated. Two-dimensional (2D) fibre mats were sandwiched between borosilicate glass powder layers, thus configuring a much simpler processing route than that commonly employed for the production of fibre-reinforced glasses. Besides economic benefits, the use of fibre mats may lead to technologic advantages due to the possibility of readily coating the fibres with a suitable material (e.g. titanium oxide) by means of the sol-gel method. The coating of basalt fibre mats with TiO2 is proposed for preventing the fibres from an excessive adhesion to the glass matrix. The developed composites containing 15 vol% of 2D-fibre reinforcement exhibited promising bending strength (∼90 MPa) and desirable “graceful” fracture behaviour without catastrophic failure. Thus the present study represents a convenient approach for production of advanced low-cost fibre reinforced glass matrix composites for structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A. R. BOCCACCINI and R. D. RAWLINGS, Glass Technol. 43C (2002) 191.
2. A. R. BOCCACCINI, J. Ceram. Soc. Japan 109(7) (2001) 99.10.2109/jcersj.109.1271_S99 ↗
3. T. LEUTBECHER and D. HUELSENBERG, Adv. Eng. Mat. 2 (2000) 93.10.1002/(SICI)1527-2648(200003)2:3<93::AID-ADEM93>3.0.CO;2-3 ↗
4. K. K. CHAWLA “Ceramic Matrix Composites” (Chapman & Hall, London, 1993).
5. R. U. VAIDYA, J. FERNANDO, K. K. CHAWLA and M. K. FERBER, Mat. Sci. Eng. A150 (1992) 161.10.1016/0921-5093(92)90108-D ↗
6. R. VENKATESH, ibid. A268 (1999) 47.10.1016/S0921-5093(99)00115-X ↗
7. A. R. BOCCACCINI, S. ATIQ and G. HELSCH, Comp. Sci. Tech. 63(6) (2003) 779.10.1016/S0266-3538(02)00262-2 ↗
8. Y. KAGAWA and Y. YAMADA, J. Mat. Sci. Lett. 13 1403.10.1007/BF00405045 ↗
9. H. IBA, T. CHANG, Y. KAGAWA, H. MINAKUCHI and K. KANAMARU, J. Am. Ceram. Soc. (79) (1996) 881.10.1111/j.1151-2916.1996.tb08520.x ↗
10. B. FANKÄNEL, E. MÜLLER, K. WEIZE and G. MARX, Key Eng. Mat. (206–213) (2002) 1109.10.4028/www.scientific.net/KEM.206-213.1109 ↗
11. D. C. PHILLIPS, in “Handbook of Composites, Fabrication of Composites”, edited by A. Kelly and S.T. Mileiko (North-Holland Publishing Company, Amsterdam, 1983) Vol. 4
12. M. J. PASCUAL, L. PASCUAL, A. DURÁN, P. WANGE and C. RÜSSEL, Glass Sci. Technol. 75 (2002) 2, 69.
13. https://doi.org/www.kimble.com
14. E. BERNARDO and G. SCARINCI, Ceram. Int. 30 (2004) 785.10.1016/j.ceramint.2003.09.013 ↗
15. J. MILITKY and V. KOVACIC, Text. Res. J. 66(4) (1996) 225.10.1177/004051759606600407 ↗
16. K. VAN DE VELDE, P. KIEKENS and L. VAN LANGENHOVE https://doi.org/www.basaltex.com .
17. C. J. BRINKER and G. E. SCHERER, Sol-Gel Science; The Physics and Chemistry of Sol-Gel Processing. (Academic Press, San Diego, 1990).
18. S. ATIQ, R. D. RAWLINGS and A. R. BOCCACCINI, Glass Science Technol. 77 (2004) 31.
19. Canadian Building Digest, CBD-60 (Characteristics of Window Glass), 1964, https://doi.org/irc.nrc-cnrc.gc.ca/cbd/cbd060e.html