Flow through an evolving porous media—compressed foam
Source abstract
Abstract
Magnetic Resonance Imaging (MRI) techniques were applied such that they were able to provide simultaneously both 3D pore-scale velocity and microstructural data for polyurethane foam with water flowing through it. This necessitated the use of velocity gating of the relevant images in order to describe accurately the position of the solid foam walls; a pore thinning algorithm was used to differentiate individual pores within the foam pore space where minima in hydraulic radius defined pore boundaries. This methodology was then used to explore the effect of foam compression on both pore geometric characteristics and pore-scale velocity fields. Pore volumes were seen to decrease from 3.27 to 0.96 mm3 as porosity was reduced from 0.84 to 0.61 and increased flow channelling, adjacent to the containing cylinder, was observed. The velocity fields were compared with corresponding Lattice Boltzmann flow simulations with good agreement being produced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lattice Boltzmann Simulation Studies · Heat and Mass Transfer in Porous Media · Fluid Dynamics and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Bear J (1972) In: Dynamics of fluids in porous media. Elsevier, New York
2. Sederman AJ, Johns ML, Bramley AS, Alexander P, Gladden LF (1997) Chem Eng Sci 52:223910.1016/S0009-2509(97)00057-2 ↗
3. Sederman AJ, Johns ML, Alexander P, Gladden LF (1998) Chem Eng Sci 53:211710.1016/S0009-2509(98)00059-1 ↗
4. Johns ML, Sederman AJ, Bramley AS, Gladden LF, Alexander P (2000) AIChE J 46:215110.1002/aic.690461108 ↗
5. Mantle MD, Sederman AJ, Gladden LF (2001) Chem Eng Sci 56:52310.1016/S0009-2509(00)00256-6 ↗
6. Mantle MD, Bijeljic B, Sederman AJ, Gladden LF (2001) MRI 19:52710.1016/S0730-725X(01)00285-5 ↗
7. Johns ML, Sederman AJ, Davis S, Wilson A, Gladden LF (2003) AIChE J 49:107610.1002/aic.690490503 ↗
8. Gibson LJ, Ashby MF (1988) In: Cellular solids. Cambridge University Press
9. Macaskie LE, Yong P, Paterson-Beedle M, Thackray AC, Marquis PM, Sammons RL, Nott KP, Hall LD (2005) J Biotechnol 118:18710.1016/j.jbiotec.2005.03.006 ↗
10. Nott KP, Heese FP, Hall LD, Macaskie LE, Paterson-Beedle M (2005) AIChE J 51:307210.1002/aic.10537 ↗
11. Weiare D, Hutzler S (1999) In: The physics of foam. Oxford University Press
12. Kose K (1996) J Magn Reson 118:19510.1006/jmra.1996.0027 ↗
13. Kashiwagi K, Kose K (1997) NMR Biomed 10:1310.1002/(SICI)1099-1492(199701)10:1<13::AID-NBM443>3.0.CO;2-Z ↗
14. Saadatfar M, Arns CH, Knackstedt MA, Senden T (2004) Colliods Surf A 263:28410.1016/j.colsurfa.2004.12.040 ↗
15. Viot P, Bernard D (2006) J Mater Sci 41:127710.1007/s10853-005-2332-x ↗
16. Baldwin CA, Sederman AJ, Mantle MD, Alexander P, Gladden LF (1996) J Colloid Interf Sci 181:7910.1006/jcis.1996.0358 ↗
17. Callaghan PT (1991) Principles of nuclear magnetic resonance microscopy. Oxford Press, New York, p 42010.1093/oso/9780198539445.003.0008 ↗
18. Chen S, Doolen GD (1998) Annu Rev Fluid Mech 30:32910.1146/annurev.fluid.30.1.329 ↗
19. He X, Luo LS (1997) J Stat Phys 88:92710.1023/B:JOSS.0000015179.12689.e4 ↗
20. Wolfram S (1986) J Stat Phys 45:47110.1007/BF01021083 ↗
21. Gallivan MA, Noble DR, Georgiadis JG, Buckius RO (1997) Int J Numer Methods Fluids 25:24910.1002/(SICI)1097-0363(19970815)25:3<249::AID-FLD546>3.0.CO;2-7 ↗
22. Sullivan SP, Johns ML, Matthews SM, Fisher AC (2005b) Electrochem Commun 7:132310.1016/j.elecom.2005.09.001 ↗
23. Sullivan SP, Gladden LF, Johns ML (2006) J Non-Newtonian Fluid Mech 133:9110.1016/j.jnnfm.2005.11.003 ↗
24. Viot P, Beani F, Lataillade J-L (2005) J Mater Sci 40:582910.1007/s10853-005-4998-5 ↗