journal article·2005-06

Estimation of reaction conditions for synthesis of nanosized brookite-type titanium dioxide from aqueous TiOCl2 solution

Jeong Hoon Lee, Yeong Seok Yang

Journal of Materials Science· Volume 40· Issue 11
Publisher page

Abstract

Ti O2 nanoparticles with a mixture of brookite and rutile phases were prepared from aqueous TiOCl2 solution at 80–150°C and pure rutile phase at 200°C. The volume fraction of brookite was gradually increased with increase of HCl concentration in the range of about 4.43 M to 6.28 M. The maximum volume fraction of brookite in the as-prepared TiO2 particles was obtained when oxidation of Ti4+ to TiO2 was completed but it was gradually decreased with increase of reaction time. The reaction time for complete oxidation of Ti4 + to TiO2 was about 15 h at 80°C, about 5 h at 100°C, about 2 h at 120°C, and about 1 h at 150°C, respectively, showing that the kinetics of oxidation is very dependent on the reaction temperature. Brookite phase was not transformed directly to rutile phase but to anatase phase by heat-treatment at about 750°C, which finally converted to rutile phase at 1100°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Catalytic Processes in Materials Science · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Y. ZHENG, E. SHI, Z. CHEN, W. LI and X. HU, J. Mater. Chem. 11 (2001) 1547.10.1039/b009203g ↗
2. C. C. WANG and J. Y. YING, Chem. Mater. 11(11) (1999) 3113.10.1021/cm990180f ↗
3. A. POTTIER, C. CHANEAC, E. TRONC, L. MAZEROLLES and J. P. JOLIVET, J. Mater. Chem. 11 (2001) 1116.10.1039/b100435m ↗
4. J. YANG, S. MEI and J. M. F. FERREIRA, J. Mater. Res. 17(9) (2002).10.1557/JMR.2002.0323 ↗
5. H. KOMINAMI, M. KOHNO and Y. KERA, J. Mater. Chem. 10 (2000) 1151.10.1039/a908528i ↗
6. Y. ZHENG, E. SHI, S. CHI, W. LI and X. HU, J. Mater. Sci. Lett. (2000) 1445.
7. Y. ZHENG, E. SHI, S. CHEN, W. LI and X. HU, J. Am. Ceram. Soc. 83(10) (2000) 2634.10.1111/j.1151-2916.2000.tb01605.x ↗
8. X. YE, J. SHA, Z. JIAO and L. ZHANG, Nanostructured Mater. 8(7) (1997) 919.10.1016/S0965-9773(98)00013-0 ↗
9. M. KOELSCH, S. CASSAIGNON, J. F. GUILLEMOLES and J. P. JOLVET, Thin Solid Film 403–404 (2002) 312.10.1016/S0040-6090(01)01509-7 ↗
10. Y. HU, H. L. TSAI and C. L. HUANG, J. Euro. Ceram. Soc. 23 (2003) 691.10.1016/S0955-2219(02)00194-2 ↗
11. P. ARNAL, R. J. P. CORRIU, D. LECLERCQ, P. H. MUTIN and A. VIOUX, J. Mater. Chem. 6(12) (1996) 1925.10.1039/JM9960601925 ↗
12. J. YANG, S. MEI and J. M. FERREIRA, J. Am. Ceram. Soc. 83(6) (2000) 1361.10.1111/j.1151-2916.2000.tb01394.x ↗
13. M. WU, J. LONG, A. HUNG and Y. LUO, Langmuir 15 (1999) 8822.10.1021/la990514f ↗
14. S. J. KIM, S. D. PARK and Y. H. JEONG, J. Am. Ceram. Soc. 82(4) (1999) 927.10.1111/j.1151-2916.1999.tb01855.x ↗
15. H. D. NAM, B. H. LEE, S. J. KIM, C. H. JUNG, J. H. LEE and S. PARK, Jap. J. Appl. Phys. 37 (1998) 4603.10.1143/JJAP.37.4603 ↗
16. S. D. PARK, Y. H. CHO, W. W. KIM and S. J. KIM, J. Solid State Chem. 146 (1999) 230.10.1006/jssc.1999.8342 ↗